Page 144 of 3235 results (0.013 seconds)

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix OOB in nilfs_set_de_type The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t mode = inode->i_mode; de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob } However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: nilfs2: corrige OOB en nilfs_set_de_type El tamaño de la matriz nilfs_type_by_mode en el archivo fs/nilfs2/dir.c se define como "S_IFMT >> S_SHIFT", pero la función nilfs_set_de_type() , que utiliza esta matriz, especifica el índice a leer de la matriz de la misma manera que "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t modo = inodo->i_mode; de->tipo_archivo = nilfs_type_by_mode[(modo & S_IFMT)>>S_SHIFT]; // oob } Sin embargo, cuando el índice se determina de esta manera, se produce un error fuera de los límites (OOB) al hacer referencia a un índice que es 1 mayor que el tamaño de la matriz cuando la condición "modo & S_IFMT == S_IFMT" es satisfecho. Por lo tanto, se debe aplicar un parche para cambiar el tamaño de la matriz nilfs_type_by_mode para evitar errores OOB. • https://git.kernel.org/stable/c/2ba466d74ed74f073257f86e61519cb8f8f46184 https://git.kernel.org/stable/c/054f29e9ca05be3906544c5f2a2c7321c30a4243 https://git.kernel.org/stable/c/90f43980ea6be4ad903e389be9a27a2a0018f1c8 https://git.kernel.org/stable/c/7061c7efbb9e8f11ce92d6b4646405ea2b0b4de1 https://git.kernel.org/stable/c/bdbe483da21f852c93b22557b146bc4d989260f0 https://git.kernel.org/stable/c/897ac5306bbeb83e90c437326f7044c79a17c611 https://git.kernel.org/stable/c/2382eae66b196c31893984a538908c3eb7506ff9 https://git.kernel.org/stable/c/90823f8d9ecca3d5fa6b102c8e464c62f •

CVSS: -EPSS: 0%CPEs: 5EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf(). En el kernel de Linux, se resolvió la siguiente vulnerabilidad: ksmbd: corrige slab-out-of-bounds en smb2_allocate_rsp_buf Si ->ProtocolId es SMB2_TRANSFORM_PROTO_NUM, se podría omitir la validación del tamaño de la solicitud smb2. Si el tamaño de la solicitud es menor que sizeof (struct smb2_query_info_req), la lectura de losa fuera de los límites puede ocurrir en smb2_allocate_rsp_buf(). Este parche asigna un búfer de respuesta después de descifrar la solicitud de transformación. smb3_decrypt_req() validará el tamaño de la solicitud de transformación y evitará la losa fuera de los límites en smb2_allocate_rsp_buf(). • https://git.kernel.org/stable/c/da21401372607c49972ea87a6edaafb36a17c325 https://git.kernel.org/stable/c/b80ba648714e6d790d69610cf14656be222d0248 https://git.kernel.org/stable/c/3160d9734453a40db248487f8204830879c207f1 https://git.kernel.org/stable/c/0977f89722eceba165700ea384f075143f012085 https://git.kernel.org/stable/c/c119f4ede3fa90a9463f50831761c28f989bfb20 •

CVSS: -EPSS: 0%CPEs: 5EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ksmbd: validar el tamaño del búfer de solicitud en smb2_allocate_rsp_buf() El búfer de respuesta debe asignarse en smb2_allocate_rsp_buf antes de validar la solicitud. Pero los campos en el payload y el encabezado smb2 se usan en smb2_allocate_rsp_buf(). • https://git.kernel.org/stable/c/8f3d0bf1d0c62b539d54c5b9108a845cff619b99 https://git.kernel.org/stable/c/21ff9d7d223c5c19cb4334009e4c0c83a2f4d674 https://git.kernel.org/stable/c/5c20b242d4fed73a93591e48bfd9772e2322fb11 https://git.kernel.org/stable/c/2c27a64a2bc47d9bfc7c3cf8be14be53b1ee7cb6 https://git.kernel.org/stable/c/17cf0c2794bdb6f39671265aa18aea5c22ee8c4a •

CVSS: -EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape For raid456, if reshape is still in progress, then IO across reshape position will wait for reshape to make progress. However, for dm-raid, in following cases reshape will never make progress hence IO will hang: 1) the array is read-only; 2) MD_RECOVERY_WAIT is set; 3) MD_RECOVERY_FROZEN is set; After commit c467e97f079f ("md/raid6: use valid sector values to determine if an I/O should wait on the reshape") fix the problem that IO across reshape position doesn't wait for reshape, the dm-raid test shell/lvconvert-raid-reshape.sh start to hang: [root@fedora ~]# cat /proc/979/stack [<0>] wait_woken+0x7d/0x90 [<0>] raid5_make_request+0x929/0x1d70 [raid456] [<0>] md_handle_request+0xc2/0x3b0 [md_mod] [<0>] raid_map+0x2c/0x50 [dm_raid] [<0>] __map_bio+0x251/0x380 [dm_mod] [<0>] dm_submit_bio+0x1f0/0x760 [dm_mod] [<0>] __submit_bio+0xc2/0x1c0 [<0>] submit_bio_noacct_nocheck+0x17f/0x450 [<0>] submit_bio_noacct+0x2bc/0x780 [<0>] submit_bio+0x70/0xc0 [<0>] mpage_readahead+0x169/0x1f0 [<0>] blkdev_readahead+0x18/0x30 [<0>] read_pages+0x7c/0x3b0 [<0>] page_cache_ra_unbounded+0x1ab/0x280 [<0>] force_page_cache_ra+0x9e/0x130 [<0>] page_cache_sync_ra+0x3b/0x110 [<0>] filemap_get_pages+0x143/0xa30 [<0>] filemap_read+0xdc/0x4b0 [<0>] blkdev_read_iter+0x75/0x200 [<0>] vfs_read+0x272/0x460 [<0>] ksys_read+0x7a/0x170 [<0>] __x64_sys_read+0x1c/0x30 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 This is because reshape can't make progress. For md/raid, the problem doesn't exist because register new sync_thread doesn't rely on the IO to be done any more: 1) If array is read-only, it can switch to read-write by ioctl/sysfs; 2) md/raid never set MD_RECOVERY_WAIT; 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold 'reconfig_mutex', hence it can be cleared and reshape can continue by sysfs api 'sync_action'. However, I'm not sure yet how to avoid the problem in dm-raid yet. This patch on the one hand make sure raid_message() can't change sync_thread() through raid_message() after presuspend(), on the other hand detect the above 3 cases before wait for IO do be done in dm_suspend(), and let dm-raid requeue those IO. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: dm-raid456, md/raid456: soluciona un punto muerto para dm-raid456 mientras io concurre con reshape. Para raid456, si el reshape todavía está en progreso, entonces IO en la posición de reshape esperará remodelar para progresar. • https://git.kernel.org/stable/c/5943a34bf6bab5801e08a55f63e1b8d5bc90dae1 https://git.kernel.org/stable/c/a8d249d770cb357d16a2097b548d2e4c1c137304 https://git.kernel.org/stable/c/41425f96d7aa59bc865f60f5dda3d7697b555677 •

CVSS: 5.5EPSS: 0%CPEs: 7EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? • https://git.kernel.org/stable/c/4595d90b5d2ea5fa4d318d13f59055aa4bf3e7f5 https://git.kernel.org/stable/c/80d24b308b7ee7037fc90d8ac99f6f78df0a256f https://git.kernel.org/stable/c/3abc2d160ed8213948b147295d77d44a22c88fa3 https://git.kernel.org/stable/c/e25447c35f8745337ea8bc0c9697fcac14df8605 https://git.kernel.org/stable/c/1daf52b5ffb24870fbeda20b4967526d8f9e12ab https://git.kernel.org/stable/c/cf54f66e1dd78990ec6b32177bca7e6ea2144a95 https://git.kernel.org/stable/c/17f46b803d4f23c66cacce81db35fef3adb8f2af https://lists.debian.org/debian-lts-announce/2024/06/ •