CVSS: 5.5EPSS: 0%CPEs: 5EXPL: 0CVE-2024-45011 – char: xillybus: Check USB endpoints when probing device
https://notcve.org/view.php?id=CVE-2024-45011
11 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduc... • https://git.kernel.org/stable/c/a53d1202aef122894b6e46116a92174a9123db5d •
CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0CVE-2024-45010 – mptcp: pm: only mark 'subflow' endp as available
https://notcve.org/view.php?id=CVE-2024-45010
11 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBF... • https://git.kernel.org/stable/c/06faa22710342bca5e9c249634199c650799fce6 •
CVSS: 5.5EPSS: 0%CPEs: 5EXPL: 0CVE-2024-45009 – mptcp: pm: only decrement add_addr_accepted for MPJ req
https://notcve.org/view.php?id=CVE-2024-45009
11 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other... • https://git.kernel.org/stable/c/d0876b2284cf8b34dd214b2d0aa21071c345da59 •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-45008 – Input: MT - limit max slots
https://notcve.org/view.php?id=CVE-2024-45008
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: Input: MT - limit max slots syzbot is reporting too large allocation at input_mt_init_slots(), for num_slots is supplied from userspace using ioctl(UI_DEV_CREATE). Since nobody knows possible max slots, this patch chose 1024. In the Linux kernel, the following vulnerability has been resolved: Input: MT - limit max slots syzbot is reporting too large allocation at input_mt_init_slots(), for num_slots is supplied from userspace using ioctl(UI... • https://git.kernel.org/stable/c/2829c80614890624456337e47320289112785f3e •
CVSS: 5.5EPSS: 0%CPEs: 5EXPL: 0CVE-2024-45007 – char: xillybus: Don't destroy workqueue from work item running on it
https://notcve.org/view.php?id=CVE-2024-45007
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Don't destroy workqueue from work item running on it Triggered by a kref decrement, destroy_workqueue() may be called from within a work item for destroying its own workqueue. This illegal situation is averted by adding a module-global workqueue for exclusive use of the offending work item. Other work items continue to be queued on per-device workqueues to ensure performance. In the Linux kernel, the following vulnerability ... • https://git.kernel.org/stable/c/409b495f8e3300d5fba08bc817fa8825dae48cc9 •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-45006 – xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
https://notcve.org/view.php?id=CVE-2024-45006
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will ... • https://git.kernel.org/stable/c/651aaf36a7d7b36a58980e70133f9437d4f6d312 •
CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0CVE-2024-45005 – KVM: s390: fix validity interception issue when gisa is switched off
https://notcve.org/view.php?id=CVE-2024-45005
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix validity interception issue when gisa is switched off We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before... • https://git.kernel.org/stable/c/fe0ef00304639cae82df7c9ad6a15286bd5f876e • CWE-665: Improper Initialization •
CVSS: 4.7EPSS: 0%CPEs: 7EXPL: 0CVE-2024-45003 – vfs: Don't evict inode under the inode lru traversing context
https://notcve.org/view.php?id=CVE-2024-45003
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xat... • https://git.kernel.org/stable/c/e50e5129f384ae282adebfb561189cdb19b81cee •
CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0CVE-2024-45002 – rtla/osnoise: Prevent NULL dereference in error handling
https://notcve.org/view.php?id=CVE-2024-45002
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference. In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead t... • https://git.kernel.org/stable/c/1eceb2fc2ca549a170d7ee7cd1fde2daeda646ac •
CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0CVE-2024-45001 – net: mana: Fix RX buf alloc_size alignment and atomic op panic
https://notcve.org/view.php?id=CVE-2024-45001
04 Sep 2024 — In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix RX buf alloc_size alignment and atomic op panic The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may pani... • https://git.kernel.org/stable/c/80f6215b450eb8e92d8b1f117abf5ecf867f963e •