CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0CVE-2024-43817 – net: missing check virtio
https://notcve.org/view.php?id=CVE-2024-43817
In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller • https://git.kernel.org/stable/c/0f6925b3e8da0dbbb52447ca8a8b42b371aac7db https://git.kernel.org/stable/c/2789bc090f4a2caef0cceb3f108867de608bb23a https://git.kernel.org/stable/c/16851e34b621bc7e652c508bb28c47948fb86958 https://git.kernel.org/stable/c/a05fb4ac72fb2ddbdcb135c87b0087ac59fa4de4 https://git.kernel.org/stable/c/a36703d08c83b1488a2f2922f0dc4263125ccd2d https://git.kernel.org/stable/c/27874ca77bd2b05a3779c7b3a5c75d8dd7f0b40f https://git.kernel.org/stable/c/5b1997487a3f3373b0f580c8a20b56c1b64b0775 https://git.kernel.org/stable/c/90d41ebe0cd4635f6410471efc1dd71b3 • CWE-130: Improper Handling of Length Parameter Inconsistency •
CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0CVE-2024-42322 – ipvs: properly dereference pe in ip_vs_add_service
https://notcve.org/view.php?id=CVE-2024-42322
In the Linux kernel, the following vulnerability has been resolved: ipvs: properly dereference pe in ip_vs_add_service Use pe directly to resolve sparse warning: net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression • https://git.kernel.org/stable/c/39b9722315364121c6e2524515a6e95d52287549 https://git.kernel.org/stable/c/3dd428039e06e1967ce294e2cd6342825aaaad77 https://git.kernel.org/stable/c/c420cd5d5bc6797f3a8824e7d74f38f0c286fca5 https://git.kernel.org/stable/c/cbd070a4ae62f119058973f6d2c984e325bce6e7 https://access.redhat.com/security/cve/CVE-2024-42322 https://bugzilla.redhat.com/show_bug.cgi?id=2305467 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-42319 – mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable()
https://notcve.org/view.php?id=CVE-2024-42319
In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable() When mtk-cmdq unbinds, a WARN_ON message with condition pm_runtime_get_sync() < 0 occurs. According to the call tracei below: cmdq_mbox_shutdown mbox_free_channel mbox_controller_unregister __devm_mbox_controller_unregister ... The root cause can be deduced to be calling pm_runtime_get_sync() after calling pm_runtime_disable() as observed below: 1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe() to bind the cmdq device to the mbox_controller, so devm_mbox_controller_unregister() will automatically unregister the device bound to the mailbox controller when the device-managed resource is removed. That means devm_mbox_controller_unregister() and cmdq_mbox_shoutdown() will be called after cmdq_remove(). 2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after devm_mbox_controller_register(), so that devm_pm_runtime_disable() will be called after cmdq_remove(), but before devm_mbox_controller_unregister(). To fix this problem, cmdq_probe() needs to move devm_mbox_controller_register() after devm_pm_runtime_enable() to make devm_pm_runtime_disable() be called after devm_mbox_controller_unregister(). • https://git.kernel.org/stable/c/623a6143a845bd485b00ba684f0ccef11835edab https://git.kernel.org/stable/c/11fa625b45faf0649118b9deaf2d31c86ac41911 https://git.kernel.org/stable/c/a8bd68e4329f9a0ad1b878733e0f80be6a971649 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-42313 – media: venus: fix use after free in vdec_close
https://notcve.org/view.php?id=CVE-2024-42313
In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free in vdec_close There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close. • https://git.kernel.org/stable/c/af2c3834c8ca7cc65d15592ac671933df8848115 https://git.kernel.org/stable/c/ad8cf035baf29467158e0550c7a42b7bb43d1db6 https://git.kernel.org/stable/c/72aff311194c8ceda934f24fd6f250b8827d7567 https://git.kernel.org/stable/c/4c9d235630d35db762b85a4149bbb0be9d504c36 https://git.kernel.org/stable/c/f8e9a63b982a8345470c225679af4ba86e4a7282 https://git.kernel.org/stable/c/da55685247f409bf7f976cc66ba2104df75d8dad https://git.kernel.org/stable/c/66fa52edd32cdbb675f0803b3c4da10ea19b6635 https://git.kernel.org/stable/c/6a96041659e834dc0b172dda4b2df512d •
CVSS: -EPSS: 0%CPEs: 11EXPL: 0CVE-2024-42312 – sysctl: always initialize i_uid/i_gid
https://notcve.org/view.php?id=CVE-2024-42312
In the Linux kernel, the following vulnerability has been resolved: sysctl: always initialize i_uid/i_gid Always initialize i_uid/i_gid inside the sysfs core so set_ownership() can safely skip setting them. Commit 5ec27ec735ba ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when set_ownership() was not implemented. It also missed adjusting net_ctl_set_ownership() to use the same default values in case the computation of a better value failed. • https://git.kernel.org/stable/c/5ec27ec735ba0477d48c80561cc5e856f0c5dfaf https://git.kernel.org/stable/c/e83234d7ef237931148b4b17834dadf57eb46c12 https://git.kernel.org/stable/c/2cbf2af144f0cd08a3361c6299b2e6086b7d21d9 https://git.kernel.org/stable/c/2c7b50c7b1d036f71acd9a917a8cb0f9b6e43dab https://git.kernel.org/stable/c/7eb45a94c279dd5af4cafaa738ae93737517eef4 https://git.kernel.org/stable/c/14cc90952cef94bfa89a6b4a2f55fd9a70f50a16 https://git.kernel.org/stable/c/b2591c89a6e2858796111138c38fcb6851aa1955 https://git.kernel.org/stable/c/34a86adea1f2b3c3f9d864c8cce09dca6 •