CVSS: 7.5EPSS: 0%CPEs: 66EXPL: 0CVE-2023-28982 – Junos OS and Junos OS Evolved: In a BGP rib sharding scenario when a route is frequently updated an rpd memory leak will occur
https://notcve.org/view.php?id=CVE-2023-28982
A Missing Release of Memory after Effective Lifetime vulnerability in the routing protocol daemon of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). In a BGP rib sharding scenario, when an attribute of an active BGP route is updated memory will leak. As rpd memory usage increases over time the rpd process will eventually run out of memory, crash, and restart. The memory utilization can be monitored with the following CLI commands: show task memory show system processes extensive | match rpd This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2. Juniper Networks Junos OS Evolved 20.3-EVO version 20.3R1-EVO and later versions; 20.4-EVO versions prior to 20.4R3-S6-EVO; 21.2-EVO versions prior to 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO. • https://supportportal.juniper.net/JSA70608 • CWE-401: Missing Release of Memory after Effective Lifetime •
CVSS: 7.1EPSS: 0%CPEs: 35EXPL: 0CVE-2023-28973 – Junos OS Evolved: The 'sysmanctl' shell command allows a local user to gain access to some administrative actions
https://notcve.org/view.php?id=CVE-2023-28973
An Improper Authorization vulnerability in the 'sysmanctl' shell command of Juniper Networks Junos OS Evolved allows a local, authenticated attacker to execute administrative commands that could impact the integrity of the system or system availability. Administrative functions such as daemon restarting, routing engine (RE) switchover, and node shutdown can all be performed through exploitation of the 'sysmanctl' command. Access to the 'sysmanctl' command is only available from the Junos shell. Neither direct nor indirect access to 'sysmanctl' is available from the Junos CLI. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO; 21.4 versions prior to 21.4R1-S2-EVO, 21.4R2-EVO. • https://supportportal.juniper.net/JSA70597 • CWE-285: Improper Authorization CWE-287: Improper Authentication •
CVSS: 6.5EPSS: 0%CPEs: 104EXPL: 0CVE-2023-22407 – Junos OS and Junos OS Evolved: An RPD crash can happen due to an MPLS TE tunnel configuration change on a directly connected router
https://notcve.org/view.php?id=CVE-2023-22407
An Incomplete Cleanup vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). An rpd crash can occur when an MPLS TE tunnel configuration change occurs on a directly connected router. This issue affects: Juniper Networks Junos OS All versions prior to 18.4R2-S7; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2. Juniper Networks Junos OS Evolved All versions prior to 19.2R3-EVO; 19.3 versions prior to 19.3R3-EVO; 19.4 versions prior to 19.4R3-EVO; 20.1 versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R2-EVO. Una vulnerabilidad de limpieza incompleta en el Routing Protocol Daemon (rpd) de Juniper Networks Junos OS y Junos OS Evolved permite que un atacante adyacente no autenticado provoque una denegación de servicio (DoS). • https://kb.juniper.net/JSA70203 • CWE-459: Incomplete Cleanup •
CVSS: 6.1EPSS: 0%CPEs: 31EXPL: 0CVE-2023-22397 – Junos OS Evolved: PTX10003: An attacker sending specific genuine packets will cause a memory leak in the PFE leading to a Denial of Service
https://notcve.org/view.php?id=CVE-2023-22397
An Allocation of Resources Without Limits or Throttling weakness in the memory management of the Packet Forwarding Engine (PFE) on Juniper Networks Junos OS Evolved PTX10003 Series devices allows an adjacently located attacker who has established certain preconditions and knowledge of the environment to send certain specific genuine packets to begin a Time-of-check Time-of-use (TOCTOU) Race Condition attack which will cause a memory leak to begin. Once this condition begins, and as long as the attacker is able to sustain the offending traffic, a Distributed Denial of Service (DDoS) event occurs. As a DDoS event, the offending packets sent by the attacker will continue to flow from one device to another as long as they are received and processed by any devices, ultimately causing a cascading outage to any vulnerable devices. Devices not vulnerable to the memory leak will process and forward the offending packet(s) to neighboring devices. Due to internal anti-flood security controls and mechanisms reaching their maximum limit of response in the worst-case scenario, all affected Junos OS Evolved devices will reboot in as little as 1.5 days. • https://kb.juniper.net/JSA70193 • CWE-367: Time-of-check Time-of-use (TOCTOU) Race Condition CWE-770: Allocation of Resources Without Limits or Throttling •
CVSS: 6.5EPSS: 0%CPEs: 130EXPL: 0CVE-2023-22406 – Junos OS and Junos OS Evolved: A memory leak which will ultimately lead to an rpd crash will be observed when a peer interface flaps continuously in a Segment Routing scenario using OSPF
https://notcve.org/view.php?id=CVE-2023-22406
A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). In a segment-routing scenario with OSPF as IGP, when a peer interface continuously flaps, next-hop churn will happen and a continuous increase in Routing Protocol Daemon (rpd) memory consumption will be observed. This will eventually lead to an rpd crash and restart when the memory is full. The memory consumption can be monitored using the CLI command "show task memory detail" as shown in the following example: user@host> show task memory detail | match "RT_NEXTHOPS_TEMPLATE|RT_TEMPLATE_BOOK_KEE" RT_NEXTHOPS_TEMPLATE 1008 1024 T 50 51200 50 51200 RT_NEXTHOPS_TEMPLATE 688 768 T 50 38400 50 38400 RT_NEXTHOPS_TEMPLATE 368 384 T 412330 158334720 412330 158334720 RT_TEMPLATE_BOOK_KEE 2064 2560 T 33315 85286400 33315 85286400 user@host> show task memory detail | match "RT_NEXTHOPS_TEMPLATE|RT_TEMPLATE_BOOK_KEE" RT_NEXTHOPS_TEMPLATE 1008 1024 T 50 51200 50 51200 RT_NEXTHOPS_TEMPLATE 688 768 T 50 38400 50 38400 RT_NEXTHOPS_TEMPLATE 368 384 T 419005 160897920 419005 160897920 <=== RT_TEMPLATE_BOOK_KEE 2064 2560 T 39975 102336000 39975 10233600 <=== This issue affects: Juniper Networks Junos OS All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S8, 19.4R3-S9; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3-S1; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S4-EVO; 21.4 versions prior to 21.4R2-S1-EVO, 21.4R3-EVO; 22.1 versions prior to 22.1R2-EVO. • https://kb.juniper.net/JSA70202 • CWE-401: Missing Release of Memory after Effective Lifetime •