CVSS: 3.3EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47582 – USB: core: Make do_proc_control() and do_proc_bulk() killable
https://notcve.org/view.php?id=CVE-2021-47582
In the Linux kernel, the following vulnerability has been resolved: USB: core: Make do_proc_control() and do_proc_bulk() killable The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke usb_start_wait_urb(), which contains an uninterruptible wait with a user-specified timeout value. If timeout value is very large and the device being accessed does not respond in a reasonable amount of time, the kernel will complain about "Task X blocked for more than N seconds", as found in testing by syzbot: INFO: task syz-executor.0:8700 blocked for more than 143 seconds. Not tainted 5.14.0-rc7-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4681 [inline] __schedule+0xc07/0x11f0 kernel/sched/core.c:5938 schedule+0x14b/0x210 kernel/sched/core.c:6017 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85 __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236 proc_bulk drivers/usb/core/devio.c:1273 [inline] usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline] usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713 ... To fix this problem, this patch replaces usbfs's calls to usb_control_msg() and usb_bulk_msg() with special-purpose code that does essentially the same thing (as recommended in the comment for usb_start_wait_urb()), except that it always uses a killable wait and it uses GFP_KERNEL rather than GFP_NOIO. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: USB: core: Hacer que do_proc_control() y do_proc_bulk() se puedan eliminar. Los ioctls USBDEVFS_CONTROL y USBDEVFS_BULK invocan usb_start_wait_urb(), que contiene una espera ininterrumpida con un valor de tiempo de espera especificado por el usuario. Si el valor del tiempo de espera es muy grande y el dispositivo al que se accede no responde en un período de tiempo razonable, el kernel se quejará de "Tarea X bloqueada durante más de N segundos", como se encontró en las pruebas realizadas por syzbot: INFORMACIÓN: tarea syz-executor .0:8700 bloqueado durante más de 143 segundos. • https://git.kernel.org/stable/c/403716741c6c2c510dce44e88f085a740f535de6 https://git.kernel.org/stable/c/ae8709b296d80c7f45aa1f35c0e7659ad69edce1 https://access.redhat.com/security/cve/CVE-2021-47582 https://bugzilla.redhat.com/show_bug.cgi?id=2293247 • CWE-667: Improper Locking •
CVSS: 6.6EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47580 – scsi: scsi_debug: Fix type in min_t to avoid stack OOB
https://notcve.org/view.php?id=CVE-2021-47580
In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix type in min_t to avoid stack OOB Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae En el kernel de Linux, se resolvió la siguiente vulnerabilidad: scsi: scsi_debug: corrige el tipo min_t para evitar la pila OOB. Cambie min_t() para usar el tipo "u32" en lugar de "int" para evitar la pila fuera de los límites. Con min_t() escriba "int", los valores se extienden y el valor mayor se usa provocando que la pila esté fuera de los límites. ERROR: KASAN: pila fuera de los límites en memcpy include/linux/fortify-string.h:191 [en línea] ERROR: KASAN: pila fuera de los límites en sg_copy_buffer+0x1de/0x240 lib/scatterlist.c: 976 Lectura del tamaño 127 en la dirección ffff888072607128 mediante la tarea syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 No contaminado 5.15.0-syzk #1 Nombre del hardware: Red Hat KVM, BIOS 1.13.0 -2 Seguimiento de llamadas: __dump_stack lib/dump_stack.c:88 [en línea] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan /report.c:442 [en línea] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [en línea] kasan_check_range+0x1a3/0x210 mm/kasan/generic .c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [en línea] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 controladores/scsi/scsi_debug.c:1162 fill_from_dev_buffer controladores/scsi/scsi_debug.c:1888 [en línea] resp_readcap16+0x365/0x3b0 controladores/scsi/scsi_debug.c :1887 Schedule_resp+0x4d8/0x1a70 controladores/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 controladores/scsi/scsi_debug.c:7533 controladores scsi_dispatch_cmd/scsi/scsi_lib.c:1520 [en línea] Controladores 0x16b0/0x2d40/ scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x10 5/0x190 cuadra/blk-mq-programado. c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 :1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570 /0x8c0 controladores/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 controladores/scsi/sg.c:939 sg_ioctl+0xa2/0x180 controladores/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [en línea] __do_sys_ioctl fs/ioctl.c:874 [en línea] __se_sys_ioctl fs/ioctl.c:860 [en línea] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [en línea] llamada al sistema_64 +0x3a/0x80 arch/x86/entry/common.c:80 Entry_SYSCALL_64_after_hwframe+0x44/0xae • https://git.kernel.org/stable/c/bdb854f134b964528fa543e0351022eb45bd7346 https://git.kernel.org/stable/c/3085147645938eb41f0bc0e25ef9791e71f5ee4b https://git.kernel.org/stable/c/36e07d7ede88a1f1ef8f0f209af5b7612324ac2c https://access.redhat.com/security/cve/CVE-2021-47580 https://bugzilla.redhat.com/show_bug.cgi?id=2293249 • CWE-125: Out-of-bounds Read •
CVSS: 4.1EPSS: 0%CPEs: 5EXPL: 0CVE-2021-47579 – ovl: fix warning in ovl_create_real()
https://notcve.org/view.php?id=CVE-2021-47579
In the Linux kernel, the following vulnerability has been resolved: ovl: fix warning in ovl_create_real() Syzbot triggered the following warning in ovl_workdir_create() -> ovl_create_real(): if (!err && WARN_ON(!newdentry->d_inode)) { The reason is that the cgroup2 filesystem returns from mkdir without instantiating the new dentry. Weird filesystems such as this will be rejected by overlayfs at a later stage during setup, but to prevent such a warning, call ovl_mkdir_real() directly from ovl_workdir_create() and reject this case early. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ovl: corregir advertencia en ovl_create_real() Syzbot activó la siguiente advertencia en ovl_workdir_create() -> ovl_create_real(): if (!err && WARN_ON(! • https://git.kernel.org/stable/c/445d2dc63e5871d218f21b8f62ab29ac72f2e6b8 https://git.kernel.org/stable/c/f9f300a92297be8250547347fd52216ef0177ae0 https://git.kernel.org/stable/c/6859985a2fbda5d1586bf44538853e1be69e85f7 https://git.kernel.org/stable/c/d2ccdd4e4efab06178608a34d7bfb20a54104c02 https://git.kernel.org/stable/c/1f5573cfe7a7056e80a92c7a037a3e69f3a13d1c https://access.redhat.com/security/cve/CVE-2021-47579 https://bugzilla.redhat.com/show_bug.cgi?id=2293250 • CWE-457: Use of Uninitialized Variable •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47578 – scsi: scsi_debug: Don't call kcalloc() if size arg is zero
https://notcve.org/view.php?id=CVE-2021-47578
In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Don't call kcalloc() if size arg is zero If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of that, for a following NULL pointer check to work on the returned pointer, kcalloc() must not be called with the size arg equal to zero. Return early without error before the kcalloc() call if size arg is zero. BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789 CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x3b/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline] do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline] resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline] scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: scsi: scsi_debug: no llamar a kcalloc() si el tamaño arg es cero. Si el tamaño arg de kcalloc() es cero, devuelve ZERO_SIZE_PTR. Por eso, para que una siguiente verificación de puntero NULL funcione en el puntero devuelto, no se debe llamar a kcalloc() con el tamaño arg igual a cero. • https://git.kernel.org/stable/c/aa1f912712a109b6306746133de7e5343f016b26 https://git.kernel.org/stable/c/47d11d35203b0aa13533634e270fe2c3610e531b https://git.kernel.org/stable/c/3344b58b53a76199dae48faa396e9fc37bf86992 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47577 – io-wq: check for wq exit after adding new worker task_work
https://notcve.org/view.php?id=CVE-2021-47577
In the Linux kernel, the following vulnerability has been resolved: io-wq: check for wq exit after adding new worker task_work We check IO_WQ_BIT_EXIT before attempting to create a new worker, and wq exit cancels pending work if we have any. But it's possible to have a race between the two, where creation checks exit finding it not set, but we're in the process of exiting. The exit side will cancel pending creation task_work, but there's a gap where we add task_work after we've canceled existing creations at exit time. Fix this by checking the EXIT bit post adding the creation task_work. If it's set, run the same cancelation that exit does. En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: io-wq: comprueba la salida de wq después de agregar un nuevo trabajador task_work Comprobamos IO_WQ_BIT_EXIT antes de intentar crear un nuevo trabajador, y wq exit cancela el trabajo pendiente si tenemos alguno. Pero es posible tener una carrera entre los dos, donde las comprobaciones de creación salen y descubren que no está configurado, pero estamos en el proceso de salir. • https://git.kernel.org/stable/c/4b4e5bbf9386d4ec21d91c0cb0fd60b9bba778ec https://git.kernel.org/stable/c/71a85387546e50b1a37b0fa45dadcae3bfb35cf6 •