Page 132 of 2798 results (0.009 seconds)

CVSS: -EPSS: 0%CPEs: 9EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: ecryptfs: Fix buffer size for tag 66 packet The 'TAG 66 Packet Format' description is missing the cipher code and checksum fields that are packed into the message packet. As a result, the buffer allocated for the packet is 3 bytes too small and write_tag_66_packet() will write up to 3 bytes past the end of the buffer. Fix this by increasing the size of the allocation so the whole packet will always fit in the buffer. This fixes the below kasan slab-out-of-bounds bug: BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0 Write of size 1 at addr ffff88800afbb2a5 by task touch/181 CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4c/0x70 print_report+0xc5/0x610 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? kasan_complete_mode_report_info+0x44/0x210 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 kasan_report+0xc2/0x110 ? • https://git.kernel.org/stable/c/dddfa461fc8951f9b5f951c13565b6cac678635a https://git.kernel.org/stable/c/1c125b9287e58f364d82174efb167414b92b11f1 https://git.kernel.org/stable/c/235b85981051cd68fc215fd32a81c6f116bfc4df https://git.kernel.org/stable/c/edbfc42ab080e78c6907d40a42c9d10b69e445c1 https://git.kernel.org/stable/c/12db25a54ce6bb22b0af28010fff53ef9cb3fe93 https://git.kernel.org/stable/c/0d0f8ba042af16519f1ef7dd10463a33b21b677c https://git.kernel.org/stable/c/2ed750b7ae1b5dc72896d7dd114c419afd3d1910 https://git.kernel.org/stable/c/a20f09452e2f58f761d11ad7b96b5c894 •

CVSS: -EPSS: 0%CPEs: 9EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: add a proper sanity check for endpoints Syzkaller reports [1] hitting a warning which is caused by presence of a wrong endpoint type at the URB sumbitting stage. While there was a check for a specific 4th endpoint, since it can switch types between bulk and interrupt, other endpoints are trusted implicitly. Similar warning is triggered in a couple of other syzbot issues [2]. Fix the issue by doing a comprehensive check of all endpoints taking into account difference between high- and full-speed configuration. [1] Syzkaller report: ... WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline] carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline] carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> [2] Related syzkaller crashes: En el kernel de Linux, se resolvió la siguiente vulnerabilidad: wifi: carl9170: agregue una verificación de integridad adecuada para los endpoints Syzkaller informa [1] que aparece una advertencia causada por la presencia de un tipo de endpoint incorrecto en la etapa de envío de URB. Si bien hubo una verificación para un cuarto endpoint específico, dado que puede cambiar de tipo entre masivo e interrupción, se confía implícitamente en otros endpoints. Se activa una advertencia similar en un par de otros problemas de syzbot [2]. Solucione el problema realizando una verificación exhaustiva de todos los endpoints teniendo en cuenta la diferencia entre la configuración de alta y máxima velocidad. [1] Informe de Syzkaller: ... • https://git.kernel.org/stable/c/a84fab3cbfdc427e7d366f1cc844f27b2084c26c https://git.kernel.org/stable/c/eb0f2fc3ff5806cc572cd9055ce7c52a01e97645 https://git.kernel.org/stable/c/ac3ed46a8741d464bc70ebdf7433c1d786cf329d https://git.kernel.org/stable/c/8650725bb0a48b206d5a8ddad3a7488f9a5985b7 https://git.kernel.org/stable/c/6a9892bf24c906b4d6b587f8759ca38bff672582 https://git.kernel.org/stable/c/265c3cda471c26e0f25d0c755da94e1eb15d7a0c https://git.kernel.org/stable/c/62eb07923f3693d55b0c2d9a5a4f1ad72cb6b8fd https://git.kernel.org/stable/c/03ddc74bdfd71b84a55c9f2185d8787f2 •

CVSS: -EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net: fec: elimine .ndo_poll_controller para evitar interbloqueos. • https://git.kernel.org/stable/c/7f5c6addcdc039c1a7c435857e6284ecac5d97c8 https://git.kernel.org/stable/c/d38625f71950e79e254515c5fc585552dad4b33e https://git.kernel.org/stable/c/accdd6b912c4219b8e056d1f1ad2e85bc66ee243 https://git.kernel.org/stable/c/87bcbc9b7e0b43a69d44efa5f32f11e32d08fa6f https://git.kernel.org/stable/c/c2e0c58b25a0a0c37ec643255558c5af4450c9f5 •

CVSS: 7.1EPSS: 0%CPEs: 9EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: bridge: xmit: asegúrese de tener al menos el encabezado eth len bytes syzbot desencadenó un error de valor uninit[1] en la ruta xmit del dispositivo puente al enviar un mensaje corto (menos de ETH_HLEN bytes) skb. Para solucionarlo, compruebe si realmente podemos retirar esa cantidad en lugar de suponerla. Probado con dropwatch: soltar en: br_dev_xmit+0xb93/0x12d0 [puente] (0xffffffffc06739b3) origen: marca de tiempo del software: lunes 13 de mayo 11:31:53 2024 778214037 protocolo nsec: 0x88a8 longitud: 2 longitud original: 2 motivo de caída: PKT_TOO_SMALL [1 ] ERROR: KMSAN: valor uninit en br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [en línea] netdev_start_xmit include/linux/netdevice.h:4917 [en línea] xmit_one net/core/dev.c:3531 [en línea] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev .c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [en línea] __bpf_tx_skb net/core/filter.c:2136 [en línea] __bpf_redirect_common net/core/filter.c:2180 [en línea] __bpf_redirect+0x14a6/0x1620 net/ Core/Filter.C: 2187 ____BPF_CLONE_REDIRECT NET/CORE/FILTRO.C: 2460 [Inline] BPF_CLONE_REDIRECT+0x328/0x470 NET/Core/Filter.c: 2432 ___ BPF_PROG_RUN+0X13FE/0XE0F0 KERNEL/BPF/BPF/CORE. 0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [en línea] __bpf_prog_run include/linux/filter.h:657 [en línea] bpf_prog_run include/linux/filter.h:664 [en línea ] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 pf+0x6aa/0xd90 núcleo/ bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [en línea] __se_sys_bpf kernel/bpf/syscall.c:5765 [en línea] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 ys_call+0x96b /0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [en línea] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 Entry_SYSCALL_64_after_hwframe+ 0x77/0x7f • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 https://git.kernel.org/stable/c/3e01fc3c66e65d9afe98f1489047a1b2dd8741ca https://git.kernel.org/stable/c/b2b7c43cd32080221bb233741bd6011983fe7c11 https://git.kernel.org/stable/c/82090f94c723dab724b1c32db406091d40448a17 https://git.kernel.org/stable/c/c964429ef53f42098a6545a5dabeb1441c1e821d https://git.kernel.org/stable/c/28126b83f86ab9cc7936029c2dff845d3dcedba2 https://git.kernel.org/stable/c/1abb371147905ba250b4cc0230c4be7e90bea4d5 https://git.kernel.org/stable/c/f482fd4ce919836a49012b2d31b00fc36 • CWE-99: Improper Control of Resource Identifiers ('Resource Injection') •

CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix division by zero in setup_dsc_config When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? • https://git.kernel.org/stable/c/a32c8f951c8a456c1c251e1dcdf21787f8066445 https://git.kernel.org/stable/c/91402e0e5de9124a3108db7a14163fcf9a6d322f https://git.kernel.org/stable/c/7e4f50dfc98c49b3dc6875a35c3112522fb25639 https://git.kernel.org/stable/c/f187fcbbb8f8bf10c6687f0beae22509369f7563 https://git.kernel.org/stable/c/308de6be0c9c7ba36915c0d398e771725c0ea911 https://git.kernel.org/stable/c/130afc8a886183a94cf6eab7d24f300014ff87ba • CWE-369: Divide By Zero •