CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-45017 – net/mlx5: Fix IPsec RoCE MPV trace call
https://notcve.org/view.php?id=CVE-2024-45017
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec RoCE MPV trace call Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? • https://git.kernel.org/stable/c/dfbd229abeee76a0bcf015e93c85dca8d18568d4 https://git.kernel.org/stable/c/2ae52a65a850ded75a94e8d7ec1e09737f4c6509 https://git.kernel.org/stable/c/607e1df7bd47fe91cab85a97f57870a26d066137 •
CVSS: -EPSS: 0%CPEs: 12EXPL: 0CVE-2024-45016 – netem: fix return value if duplicate enqueue fails
https://notcve.org/view.php?id=CVE-2024-45016
In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS. • https://git.kernel.org/stable/c/5845f706388a4cde0f6b80f9e5d33527e942b7d9 https://git.kernel.org/stable/c/a550a01b8af856f2684b0f79d552f5119eb5006c https://git.kernel.org/stable/c/009510a90e230bb495f3fe25c7db956679263b07 https://git.kernel.org/stable/c/4de7d30668cb8b06330992e1cd336f91700a2ce7 https://git.kernel.org/stable/c/d1dd2e15c85e890a1cc9bde5ba07ae63331e5c73 https://git.kernel.org/stable/c/0148fe458b5705e2fea7cb88294fed7e36066ca2 https://git.kernel.org/stable/c/759e3e8c4a6a6b4e52ebc4547123a457f0ce90d4 https://git.kernel.org/stable/c/c414000da1c2ea1ba9a5e5bb1a4ba774e •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-45015 – drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable()
https://notcve.org/view.php?id=CVE-2024-45015
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/ • https://git.kernel.org/stable/c/25fdd5933e4c0f5fe2ea5cd59994f8ac5fbe90ef https://git.kernel.org/stable/c/3fb61718bcbe309279205d1cc275a6435611dc77 https://git.kernel.org/stable/c/3bacf814b6a61cc683c68465f175ebd938f09c52 https://git.kernel.org/stable/c/aedf02e46eb549dac8db4821a6b9f0c6bf6e3990 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-45014 – s390/boot: Avoid possible physmem_info segment corruption
https://notcve.org/view.php?id=CVE-2024-45014
In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid possible physmem_info segment corruption When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range. • https://git.kernel.org/stable/c/693d41f7c938f92d881e6a51525e6c132a186afd https://git.kernel.org/stable/c/a944cba5d57687b747023c3bc074fcf9c790f7df https://git.kernel.org/stable/c/d7fd2941ae9a67423d1c7bee985f240e4686634f •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-45013 – nvme: move stopping keep-alive into nvme_uninit_ctrl()
https://notcve.org/view.php?id=CVE-2024-45013
In the Linux kernel, the following vulnerability has been resolved: nvme: move stopping keep-alive into nvme_uninit_ctrl() Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup") moves starting keep-alive from nvme_start_ctrl() into nvme_init_ctrl_finish(), but don't move stopping keep-alive into nvme_uninit_ctrl(), so keep-alive work can be started and keep pending after failing to start controller, finally use-after-free is triggered if nvme host driver is unloaded. This patch fixes kernel panic when running nvme/004 in case that connection failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl(). This way is reasonable because keep-alive is now started in nvme_init_ctrl_finish(). • https://git.kernel.org/stable/c/3af755a46881c32fecaecfdeaf3a8f0a869deca5 https://git.kernel.org/stable/c/4101af98ab573554c4225e328d506fec2a74bc54 https://git.kernel.org/stable/c/a54a93d0e3599b05856971734e15418ac551a14c •