CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50202 – nilfs2: propagate directory read errors from nilfs_find_entry()
https://notcve.org/view.php?id=CVE-2024-50202
In the Linux kernel, the following vulnerability has been resolved: nilfs2: propagate directory read errors from nilfs_find_entry() Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together. • https://git.kernel.org/stable/c/2ba466d74ed74f073257f86e61519cb8f8f46184 https://git.kernel.org/stable/c/bb857ae1efd3138c653239ed1e7aef14e1242c81 https://git.kernel.org/stable/c/b4b3dc9e7e604be98a222e9f941f5e93798ca475 https://git.kernel.org/stable/c/c1d0476885d708a932980b0f28cd90d9bd71db39 https://git.kernel.org/stable/c/edf8146057264191d5bfe5b91773f13d936dadd3 https://git.kernel.org/stable/c/270a6f9df35fa2aea01ec23770dc9b3fc9a12989 https://git.kernel.org/stable/c/9698088ac7704e260f492d9c254e29ed7dd8729a https://git.kernel.org/stable/c/efa810b15a25531cbc2f527330947b9fe •
CVSS: -EPSS: 0%CPEs: 7EXPL: 0CVE-2024-50199 – mm/swapfile: skip HugeTLB pages for unuse_vma
https://notcve.org/view.php?id=CVE-2024-50199
In the Linux kernel, the following vulnerability has been resolved: mm/swapfile: skip HugeTLB pages for unuse_vma I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The problem can be reproduced by the following steps: 1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory. 2. Swapout the above anonymous memory. 3. run swapoff and we will get a bad pud error in kernel message: mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7) We can tell that pud_clear_bad is called by pud_none_or_clear_bad in unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never be freed because we lost it from page table. • https://git.kernel.org/stable/c/0fe6e20b9c4c53b3e97096ee73a0857f60aad43f https://git.kernel.org/stable/c/ba7f982cdb37ff5a7739dec85d7325ea66fc1496 https://git.kernel.org/stable/c/417d5838ca73c6331ae2fe692fab6c25c00d9a0b https://git.kernel.org/stable/c/e41710f5a61aca9d6baaa8f53908a927dd9e7aa7 https://git.kernel.org/stable/c/6ec0fe3756f941f42f8c57156b8bdf2877b2ebaf https://git.kernel.org/stable/c/bed2b9037806c62166a0ef9a559a1e7e3e1275b8 https://git.kernel.org/stable/c/eb66a833cdd2f7302ee05d05e0fa12a2ca32eb87 https://git.kernel.org/stable/c/7528c4fb1237512ee18049f852f014eba •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-50196 – pinctrl: ocelot: fix system hang on level based interrupts
https://notcve.org/view.php?id=CVE-2024-50196
In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, ®); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ``` • https://git.kernel.org/stable/c/655f5d4662b958122b260be05aa6dfdf8768efe6 https://git.kernel.org/stable/c/4a81800ef05bea5a9896f199677f7b7f5020776a https://git.kernel.org/stable/c/20728e86289ab463b99b7ab4425515bd26aba417 https://git.kernel.org/stable/c/dcbe9954634807ec54e22bde278b5b269f921381 https://git.kernel.org/stable/c/93b8ddc54507a227087c60a0013ed833b6ae7d3c •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50195 – posix-clock: Fix missing timespec64 check in pc_clock_settime()
https://notcve.org/view.php?id=CVE-2024-50195
In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. • https://git.kernel.org/stable/c/0606f422b453f76c31ab2b1bd52943ff06a2dcf2 https://git.kernel.org/stable/c/29f085345cde24566efb751f39e5d367c381c584 https://git.kernel.org/stable/c/e0c966bd3e31911b57ef76cec4c5796ebd88e512 https://git.kernel.org/stable/c/673a1c5a2998acbd429d6286e6cad10f17f4f073 https://git.kernel.org/stable/c/c8789fbe2bbf75845e45302cba6ffa44e1884d01 https://git.kernel.org/stable/c/27abbde44b6e71ee3891de13e1a228aa7ce95bfe https://git.kernel.org/stable/c/a3f169e398215e71361774d13bf91a0101283ac2 https://git.kernel.org/stable/c/1ff7247101af723731ea42ed565d54fb8 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50194 – arm64: probes: Fix uprobes for big-endian kernels
https://notcve.org/view.php?id=CVE-2024-50194
In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Fix uprobes for big-endian kernels The arm64 uprobes code is broken for big-endian kernels as it doesn't convert the in-memory instruction encoding (which is always little-endian) into the kernel's native endianness before analyzing and simulating instructions. This may result in a few distinct problems: * The kernel may may erroneously reject probing an instruction which can safely be probed. * The kernel may erroneously erroneously permit stepping an instruction out-of-line when that instruction cannot be stepped out-of-line safely. * The kernel may erroneously simulate instruction incorrectly dur to interpretting the byte-swapped encoding. The endianness mismatch isn't caught by the compiler or sparse because: * The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so the compiler and sparse have no idea these contain a little-endian 32-bit value. The core uprobes code populates these with a memcpy() which similarly does not handle endianness. * While the uprobe_opcode_t type is an alias for __le32, both arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[] to the similarly-named probe_opcode_t, which is an alias for u32. Hence there is no endianness conversion warning. Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and adding the appropriate __le32_to_cpu() conversions prior to consuming the instruction encoding. The core uprobes copies these fields as opaque ranges of bytes, and so is unaffected by this change. At the same time, remove MAX_UINSN_BYTES and consistently use AARCH64_INSN_SIZE for clarity. Tested with the following: | #include <stdio.h> | #include <stdbool.h> | | #define noinline __attribute__((noinline)) | | static noinline void *adrp_self(void) | { | void *addr; | | asm volatile( | " adrp %x0, adrp_self\n" | " add %x0, %x0, :lo12:adrp_self\n" | : "=r" (addr)); | } | | | int main(int argc, char *argv) | { | void *ptr = adrp_self(); | bool equal = (ptr == adrp_self); | | printf("adrp_self => %p\n" | "adrp_self() => %p\n" | "%s\n", | adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL"); | | return 0; | } .... where the adrp_self() function was compiled to: | 00000000004007e0 <adrp_self>: | 4007e0: 90000000 adrp x0, 400000 <__ehdr_start> | 4007e4: 911f8000 add x0, x0, #0x7e0 | 4007e8: d65f03c0 ret Before this patch, the ADRP is not recognized, and is assumed to be steppable, resulting in corruption of the result: | # . • https://git.kernel.org/stable/c/9842ceae9fa8deae141533d52a6ead7666962c09 https://git.kernel.org/stable/c/b6a638cb600e13f94b5464724eaa6ab7f3349ca2 https://git.kernel.org/stable/c/e6ab336213918575124d6db43dc5d3554526242e https://git.kernel.org/stable/c/cf9ddf9ed94c15564a05bbf6e9f18dffa0c7df80 https://git.kernel.org/stable/c/cf60d19d40184e43d9a624e55a0da73be09e938d https://git.kernel.org/stable/c/14841bb7a531b96e2dde37423a3b33e75147c60d https://git.kernel.org/stable/c/8165bf83b8a64be801d59cd2532b0d1ffed74d00 https://git.kernel.org/stable/c/3d2530c65be04e93720e30f191a7cf1a3 •