Page 15 of 537 results (0.005 seconds)

CVSS: 7.5EPSS: 0%CPEs: 91EXPL: 0

A Use of Uninitialized Resource vulnerability in the Border Gateway Protocol (BGP) software of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to send specific genuine BGP packets to a device configured with BGP to cause a Denial of Service (DoS) by crashing the Routing Protocol Daemon (rpd). This issue is triggered when the packets attempt to initiate a BGP connection before a BGP session is successfully established. Continued receipt of these specific BGP packets will cause a sustained Denial of Service condition. This issue is triggerable in both iBGP and eBGP deployments. This issue affects: Juniper Networks Junos OS 21.1 version 21.1R1 and later versions prior to 21.1R3-S5; 21.2 version 21.2R1 and later versions prior to 21.2R3-S2; 21.3 version 21.3R1 and later versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R3; 22.2 versions prior to 22.2R2. • https://supportportal.juniper.net/JSA70591 • CWE-908: Use of Uninitialized Resource •

CVSS: 5.3EPSS: 0%CPEs: 257EXPL: 0

An Improperly Controlled Sequential Memory Allocation vulnerability in the Juniper Networks Deep Packet Inspection-Decoder (JDPI-Decoder) Application Signature component of Junos OS's AppID service on SRX Series devices will stop the JDPI-Decoder from identifying dynamic application traffic, allowing an unauthenticated network-based attacker to send traffic to the target device using the JDPI-Decoder, designed to inspect dynamic application traffic and take action upon this traffic, to instead begin to not take action and to pass the traffic through. An example session can be seen by running the following command and evaluating the output. user@device# run show security flow session source-prefix <address/mask> extensive Session ID: <session ID>, Status: Normal, State: Active Policy name: <name of policy> Dynamic application: junos:UNKNOWN, <<<<< LOOK HERE Please note, the JDPI-Decoder and the AppID SigPack are both affected and both must be upgraded along with the operating system to address the matter. By default, none of this is auto-enabled for automatic updates. This issue affects: Juniper Networks any version of the JDPI-Decoder Engine prior to version 5.7.0-47 with the JDPI-Decoder enabled using any version of the AppID SigPack prior to version 1.550.2-31 (SigPack 3533) on Junos OS on SRX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; • https://supportportal.juniper.net/JSA70592 https://supportportal.juniper.net/s/article/SRX-How-to-update-IDP-signature-database-automatically-on-a-SRX https://www.juniper.net/documentation/us/en/software/jdpi/release-notes/jdpi-decoder-release-notes-october-2022/jdpi-decoder-release-notes-october-2022.pdf • CWE-770: Allocation of Resources Without Limits or Throttling CWE-1325: Improperly Controlled Sequential Memory Allocation •

CVSS: 6.5EPSS: 0%CPEs: 49EXPL: 0

An Improper Check or Handling of Exceptional Conditions vulnerability in packet processing on the network interfaces of Juniper Networks Junos OS on JRR200 route reflector appliances allows an adjacent, network-based attacker sending a specific packet to the device to cause a kernel crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue can only be triggered by an attacker on the local broadcast domain. Packets routed to the device are unable to trigger this crash. This issue affects Juniper Networks Junos OS on JRR200: All versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S2, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; 22.4 versions prior to 22.4R1-S1, 22.4R2. • https://supportportal.juniper.net/JSA70594 • CWE-703: Improper Check or Handling of Exceptional Conditions CWE-755: Improper Handling of Exceptional Conditions •

CVSS: 6.8EPSS: 0%CPEs: 152EXPL: 0

An Improper Link Resolution Before File Access vulnerability in console port access of Juniper Networks Junos OS on NFX Series allows an attacker to bypass console access controls. When "set system ports console insecure" is enabled, root login is disallowed for Junos OS as expected. However, the root password can be changed using "set system root-authentication plain-text-password" on NFX Series systems, leading to a possible administrative bypass with physical access to the console. Password recovery, changing the root password from a console, should not have been allowed from an insecure console. This is similar to the vulnerability described in CVE-2019-0035 but affects different platforms and in turn requires a different fix. • https://supportportal.juniper.net/JSA70596 • CWE-59: Improper Link Resolution Before File Access ('Link Following') •

CVSS: 7.4EPSS: 0%CPEs: 122EXPL: 0

An Improper Check for Unusual or Exceptional Conditions vulnerability in the bbe-smgd of Juniper Networks Junos OS allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). In a Broadband Edge / Subscriber Management scenario on MX Series when a specifically malformed ICMP packet addressed to the device is received from a subscriber the bbe-smgd will crash, affecting the subscriber sessions that are connecting, updating, or terminating. Continued receipt of such packets will lead to a sustained DoS condition. When this issue happens the below log can be seen if the traceoptions for the processes smg-service are enabled: BBE_TRACE(TRACE_LEVEL_INFO, "%s: Dropped unsupported ICMP PKT ... This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S7; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R1-S2, 22.3R2. • https://supportportal.juniper.net/JSA70599 • CWE-754: Improper Check for Unusual or Exceptional Conditions •