Page 155 of 3417 results (0.013 seconds)

CVSS: 6.1EPSS: 0%CPEs: 5EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: xhci: Handle TD clearing for multiple streams case When multiple streams are in use, multiple TDs might be in flight when an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for each, to ensure everything is reset properly and the caches cleared. Change the logic so that any N>1 TDs found active for different streams are deferred until after the first one is processed, calling xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to queue another command until we are done with all of them. Also change the error/"should never happen" paths to ensure we at least clear any affected TDs, even if we can't issue a command to clear the hardware cache, and complain loudly with an xhci_warn() if this ever happens. This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") early on in the XHCI driver's life, when stream support was first added. It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"), which added a FIXME comment for the problem case (without materially changing the behavior as far as I can tell, though the new logic made the problem more obvious). Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs."), it was acknowledged again. [Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") was a targeted regression fix to the previously mentioned patch. Users reported issues with usb stuck after unmounting/disconnecting UAS devices. This rolled back the TD clearing of multiple streams to its original state.] Apparently the commit author was aware of the problem (yet still chose to submit it): It was still mentioned as a FIXME, an xhci_dbg() was added to log the problem condition, and the remaining issue was mentioned in the commit description. • https://git.kernel.org/stable/c/e9df17eb1408cfafa3d1844bfc7f22c7237b31b8 https://git.kernel.org/stable/c/26460c1afa311524f588e288a4941432f0de6228 https://git.kernel.org/stable/c/633f72cb6124ecda97b641fbc119340bd88d51a9 https://git.kernel.org/stable/c/949be4ec5835e0ccb3e2a8ab0e46179cb5512518 https://git.kernel.org/stable/c/61593dc413c3655e4328a351555235bc3089486a https://git.kernel.org/stable/c/5ceac4402f5d975e5a01c806438eb4e554771577 https://access.redhat.com/security/cve/CVE-2024-40927 https://bugzilla.redhat.com/show_bug.cgi?id=2297511 • CWE-820: Missing Synchronization •

CVSS: -EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: parisc: Try to fix random segmentation faults in package builds PA-RISC systems with PA8800 and PA8900 processors have had problems with random segmentation faults for many years. Systems with earlier processors are much more stable. Systems with PA8800 and PA8900 processors have a large L2 cache which needs per page flushing for decent performance when a large range is flushed. The combined cache in these systems is also more sensitive to non-equivalent aliases than the caches in earlier systems. The majority of random segmentation faults that I have looked at appear to be memory corruption in memory allocated using mmap and malloc. My first attempt at fixing the random faults didn't work. On reviewing the cache code, I realized that there were two issues which the existing code didn't handle correctly. Both relate to cache move-in. • https://git.kernel.org/stable/c/5bf196f1936bf93df31112fbdfb78c03537c07b0 https://git.kernel.org/stable/c/d66f2607d89f760cdffed88b22f309c895a2af20 https://git.kernel.org/stable/c/72d95924ee35c8cd16ef52f912483ee938a34d49 •

CVSS: 4.7EPSS: 0%CPEs: 13EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup() The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. • https://git.kernel.org/stable/c/1d147bfa64293b2723c4fec50922168658e613ba https://git.kernel.org/stable/c/ad64b463d919a18be70b281efb135231169caf4a https://git.kernel.org/stable/c/46a5a5493360f995b834eb3b828eb59da4604509 https://git.kernel.org/stable/c/a7ee1a84a81555b19ec3d02f104bfd70cf0b668a https://git.kernel.org/stable/c/58d4310586466840dab77e56e53f4508853a5268 https://git.kernel.org/stable/c/fcb6d3c79824d350893edfa7b50d6ba1f670c4ec https://git.kernel.org/stable/c/e51637e0c66a6f72d134d9f95daa47ea62b43c7e https://git.kernel.org/stable/c/28ba44d680a30c51cf485a2f5a3b680e6 • CWE-833: Deadlock •

CVSS: 4.4EPSS: 0%CPEs: 5EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. • https://git.kernel.org/stable/c/7406353d43c8e2faf478721e87aeb6f2f9685de0 https://git.kernel.org/stable/c/dfd84ce41663be9ca3f69bd657c45f49b69344d9 https://git.kernel.org/stable/c/6d540b0317901535275020bd4ac44fac6439ca76 https://git.kernel.org/stable/c/0ccc63958d8373e15a69f4f8069f3e78f7f3898a https://git.kernel.org/stable/c/43e1eefb0b2094e2281150d87d09e8bc872b9fba https://git.kernel.org/stable/c/642f89daa34567d02f312d03e41523a894906dae https://access.redhat.com/security/cve/CVE-2024-40911 https://bugzilla.redhat.com/show_bug.cgi?id=2297495 • CWE-476: NULL Pointer Dereference •

CVSS: -EPSS: 0%CPEs: 10EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount imbalance on inbound connections When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <TASK> ? show_regs+0x64/0x70 ? __warn+0x83/0x120 ? • https://git.kernel.org/stable/c/9fd75b66b8f68498454d685dc4ba13192ae069b0 https://git.kernel.org/stable/c/c44a453ffe16eb08acdc6129ac4fa0192dbc0456 https://git.kernel.org/stable/c/de55a1338e6a48ff1e41ea8db1432496fbe2a62b https://git.kernel.org/stable/c/9e1e088a57c23251f1cfe9601bbd90ade2ea73b9 https://git.kernel.org/stable/c/b20a5ab0f5fb175750c6bafd4cf12daccf00c738 https://git.kernel.org/stable/c/452ae92b99062d2f6a34324eaf705a3b7eac9f8b https://git.kernel.org/stable/c/534156dd4ed768e30a43de0036f45dca7c54818f https://git.kernel.org/stable/c/f4df9d6c8d4e4c818252b0419c2165d66 •