Page 166 of 2711 results (0.008 seconds)

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: scsi: mpt3sas: solucionó el pánico del kernel durante la prueba de ciclo de energía de la unidad. Mientras se recorre la lista sdev de shost, es posible que una de las unidades se esté eliminando y su objeto sas_target se libere pero su objeto sdev permanece intacta. En consecuencia, puede ocurrir un pánico en el kernel mientras el controlador intenta acceder al campo sas_address del objeto sas_target sin verificar también si el objeto sas_target es NULL. • https://git.kernel.org/stable/c/f92363d12359498f9a9960511de1a550f0ec41c2 https://git.kernel.org/stable/c/5d4d50b1f159a5ebab7617f47121b4370aa58afe https://git.kernel.org/stable/c/58ef2c7a6de13721865d84b80eecf56d6cba0937 https://git.kernel.org/stable/c/dd035ca0e7a142870a970d46b1d19276cfe2bc8c https://git.kernel.org/stable/c/0d4b29eaadc1f59cec0c7e85eae77d08fcca9824 https://git.kernel.org/stable/c/7e324f734a914957b8cc3ff4b4c9f0409558adb5 https://git.kernel.org/stable/c/2bf9c5a5039c8f4b037236aed505e6a25c1d5f7b https://git.kernel.org/stable/c/8485649a7655e791a6e4e9f15b4d30fda •

CVSS: -EPSS: 0%CPEs: 2EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? • https://git.kernel.org/stable/c/e03513f58919d9e2bc6df765ca2c9da863d03d90 https://git.kernel.org/stable/c/2a19b28f7929866e1cec92a3619f4de9f2d20005 •

CVSS: 6.5EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: drm/amd/amdkfd: corrige el pánico del kernel cuando el reinicio falla y se activa nuevamente. En la configuración SRIOV, el reinicio puede no lograr que asic vuelva a la normalidad, pero ya se ha llamado a detener cpsch, el No se llamará a start_cpsch ya que en este caso no hay ningún currículum. Cuando el reinicio se activa nuevamente, el controlador debe evitar realizar la desinicialización nuevamente. • https://git.kernel.org/stable/c/74aafe99efb68f15e50be9f7032c2168512f98a8 https://git.kernel.org/stable/c/06c6f8f86ec243b89e52f0c3dc7062bcb9de74df https://git.kernel.org/stable/c/2cf49e00d40d5132e3d067b5aa6d84791929ab15 •

CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix potential memleak In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: drm/amd/amdgpu: corrige una posible fuga de mem en la función amdgpu_get_xgmi_hive, cuando falla kobject_init_and_add Hay una posible fuga de mem si no se llama a kobject_put. • https://git.kernel.org/stable/c/c746945fb6bcbe3863c9ea6369c7ef376e38e5eb https://git.kernel.org/stable/c/75752ada77e0726327adf68018b9f50ae091baeb https://git.kernel.org/stable/c/27dfaedc0d321b4ea4e10c53e4679d6911ab17aa • CWE-401: Missing Release of Memory after Effective Lifetime •

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: sata_fsl: corrige UAF en sata_fsl_port_stop cuando rmmod sata_fsl Cuando se ejecuta el comando `rmmod sata_fsl.ko` en el PPC64 GNU/Linux se reporta un error: ====== ==================================================== ========== ERROR: No se puede manejar el acceso a los datos del kernel al leer en 0x80000800805b502c Ups: Acceso al kernel del área defectuosa, firma: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034 ] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Seguimiento de llamadas: .free_irq+0x1c/0x4e0 (no confiable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0. driver_detach+0x64/0xd0 . bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] . • https://git.kernel.org/stable/c/faf0b2e5afe7dae072d2715763c7f992b612b628 https://git.kernel.org/stable/c/cdcd80292106df5cda325426e96495503e41f947 https://git.kernel.org/stable/c/91ba94d3f7afca195b224f77a72044fbde1389ce https://git.kernel.org/stable/c/325ea49fc43cbc03a5e1e37de8f0ca6357ced4b1 https://git.kernel.org/stable/c/0769449b0a5eabc3545337217ae690e46673e73a https://git.kernel.org/stable/c/77393806c76b6b44f1c44bd957788c8bd9152c45 https://git.kernel.org/stable/c/4a46b2f5dce02539e88a300800812bd24a45e097 https://git.kernel.org/stable/c/adf098e2a8a1e1fc075d6a5ba2edd13cf •