CVSS: 6.3EPSS: 0%CPEs: 7EXPL: 0CVE-2021-47267 – usb: fix various gadget panics on 10gbps cabling
https://notcve.org/view.php?id=CVE-2021-47267
In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way). En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: usb: corrige varios fallos de dispositivos en cableado de 10 gbps usb_assign_descriptors() se llama con 5 parámetros, los últimos 4 de los cuales son usb_descriptor_header para: velocidad completa (USB1.1 - 12Mbps [ incluyendo USB1.0 de baja velocidad a 1,5 Mbps), alta velocidad (USB2.0 - 480 Mbps), súper velocidad (USB3.0 - 5 Gbps), súper velocidad plus (USB3.1 - 10 Gbps). Las diferencias entre los descriptores de velocidad completa/alta/supervelocidad suelen ser sustanciales (debido a cambios en el tamaño máximo del bloque USB de 64 a 512 a 1024 bytes y otras diferencias en las especificaciones), mientras que la diferencia entre los descriptores de 5 y 10 Gbps puede ser tan casi nada (en muchos casos, la misma afinación es simplemente suficiente). Sin embargo, si un controlador de dispositivo llama a usb_assign_descriptors() con un descriptor NULL para super-speed-plus y luego se usa en una configuración máxima de 10 gbps, el kernel fallará con una desreferencia de puntero null, cuando un puerto de dispositivo con capacidad de 10 gbps + cable + puerto de host Aparece la combinación. (Esto no sucedería si la velocidad máxima del dispositivo estuviera configurada en 5 gbps, pero, por supuesto, está predeterminada al máximo y no hay ninguna razón real para limitarla artificialmente). • https://git.kernel.org/stable/c/fd24be23abf3e94260be0f00bb42c7e91d495f87 https://git.kernel.org/stable/c/70cd19cb5bd94bbb5bacfc9c1e4ee0071699a604 https://git.kernel.org/stable/c/45f9a2fe737dc0a5df270787f2231aee8985cd59 https://git.kernel.org/stable/c/5ef23506695b01d5d56a13a092a97f2478069d75 https://git.kernel.org/stable/c/b972eff874637402ddc4a7dd11fb22538a0b6d28 https://git.kernel.org/stable/c/ca6bc277430d90375452b60b047763a090b7673e https://git.kernel.org/stable/c/032e288097a553db5653af552dd8035cd2a0ba96 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47265 – RDMA: Verify port when creating flow rule
https://notcve.org/view.php?id=CVE-2021-47265
In the Linux kernel, the following vulnerability has been resolved: RDMA: Verify port when creating flow rule Validate port value provided by the user and with that remove no longer needed validation by the driver. The missing check in the mlx5_ib driver could cause to the below oops. Call trace: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 el0_svc+0x10/0x26c Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a) En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: RDMA: Verificar puerto al crear regla de flujo. Validar valor de puerto proporcionado por el usuario y con ello eliminar la validación que ya no necesita el controlador. La verificación que falta en el controlador mlx5_ib podría provocar los siguientes errores. Seguimiento de llamadas: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x1 50 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158 /0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 0x10/0x26c Código: b9401260 f9615681 51000400 8b001c20 (f9403c1a) • https://git.kernel.org/stable/c/436f2ad05a0b65b1467ddf51bc68171c381bf844 https://git.kernel.org/stable/c/8dc1b0e0ca204596c50bcd159ee069ae0f998176 https://git.kernel.org/stable/c/2adcb4c5a52a2623cd2b43efa7041e74d19f3a5e •
CVSS: -EPSS: 0%CPEs: 7EXPL: 0CVE-2021-47258 – scsi: core: Fix error handling of scsi_host_alloc()
https://notcve.org/view.php?id=CVE-2021-47258
In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix error handling of scsi_host_alloc() After device is initialized via device_initialize(), or its name is set via dev_set_name(), the device has to be freed via put_device(). Otherwise device name will be leaked because it is allocated dynamically in dev_set_name(). Fix the leak by replacing kfree() with put_device(). Since scsi_host_dev_release() properly handles IDA and kthread removal, remove special-casing these from the error handling as well. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: scsi: core: corrige el manejo de errores de scsi_host_alloc(). Después de que el dispositivo se inicializa mediante device_initialize(), o su nombre se establece mediante dev_set_name(), el dispositivo debe liberarse mediante put_device (). • https://git.kernel.org/stable/c/8958181c1663e24a13434448e7d6b96b5d04900a https://git.kernel.org/stable/c/db08ce595dd64ea9859f7d088b51cbfc8e685c66 https://git.kernel.org/stable/c/2dc85045ae65b9302a1d2e2ddd7ce4c030153a6a https://git.kernel.org/stable/c/79296e292d67fa7b5fb8d8c27343683e823872c8 https://git.kernel.org/stable/c/7a696ce1d5d16a33a6cd6400bbcc0339b2460e11 https://git.kernel.org/stable/c/45d83db4728127944b237c0c8248987df9d478e7 https://git.kernel.org/stable/c/66a834d092930cf41d809c0e989b13cd6f9ca006 •
CVSS: 5.5EPSS: 0%CPEs: 7EXPL: 0CVE-2021-47257 – net: ieee802154: fix null deref in parse dev addr
https://notcve.org/view.php?id=CVE-2021-47257
In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: ieee802154: corrige el deref null en analizar dev addr. Se corrige un error lógico que podría resultar en un deref null si el usuario configura el modo incorrectamente para el tipo de dirección dado. • https://git.kernel.org/stable/c/1f95741981c899c4724647291fec5faa3c777185 https://git.kernel.org/stable/c/c6998ccfefa652bac3f9b236821e392af43efa1e https://git.kernel.org/stable/c/5f728ec65485625e30f46e5b4917ff023ad29ea0 https://git.kernel.org/stable/c/d0f47648b87b6d5f204cb7f3cbce6d36dab85a67 https://git.kernel.org/stable/c/c7836de2cadd88bc2f20f2c5a3d4ef4c73aef627 https://git.kernel.org/stable/c/fdd51e34f45311ab6e48d2147cbc2904731b9993 https://git.kernel.org/stable/c/9fdd04918a452980631ecc499317881c1d120b70 https://access.redhat.com/security/cve/CVE-2021-47257 • CWE-476: NULL Pointer Dereference •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2021-47254 – gfs2: Fix use-after-free in gfs2_glock_shrink_scan
https://notcve.org/view.php?id=CVE-2021-47254
In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in gfs2_glock_shrink_scan The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: gfs2: corrige use-after-free en gfs2_glock_shrink_scan. El indicador GLF_LRU se marca en lru_lock en gfs2_glock_remove_from_lru() para eliminar el glock de la lista lru en __gfs2_glock_put(). En la ruta de escaneo de reducción, la misma bandera se borra en lru_lock pero debido a cond_resched_lock(&lru_lock) en gfs2_dispose_glock_lru(), se puede avanzar en el lado de venta sin eliminar la glock de la lista de lru. Mantenga GLF_LRU en la ventana de ejecución abierta por cond_resched_lock(&lru_lock) para garantizar un comportamiento correcto en ambos lados; borre GLF_LRU después de list_del en lru_lock. • https://git.kernel.org/stable/c/38ce329534500bf4ae71f81df6a37a406cf187b4 https://git.kernel.org/stable/c/92869945cc5b78ee8a1ef90336fe070893e3458a https://git.kernel.org/stable/c/0364742decb0f02bc183404868b82896f7992595 https://git.kernel.org/stable/c/094bf5670e762afa243d2c41a5c4ab71c7447bf4 https://git.kernel.org/stable/c/86fd5b27db743a0ce0cc245e3a34813b2aa6ec1d https://git.kernel.org/stable/c/a61156314b66456ab6a291ed5deba1ebd002ab3c https://git.kernel.org/stable/c/e87ef30fe73e7e10d2c85bdcc778dcec24dca553 https://git.kernel.org/stable/c/1ab19c5de4c537ec0d9b21020395a5b5a •