CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47559 – net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk()
https://notcve.org/view.php?id=CVE-2021-47559
In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Coverity reports a possible NULL dereferencing problem: in smc_vlan_by_tcpsk(): 6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times). 7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS) 8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Remove the manual implementation and use netdev_walk_all_lower_dev() to iterate over the lower devices. While on it remove an obsolete function parameter comment. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net/smc: corrige la desreferenciación del puntero NULL en smc_vlan_by_tcpsk() Coverity informa un posible problema de desreferenciación de NULL: en smc_vlan_by_tcpsk(): 6. return_null: netdev_lower_get_next devuelve NULL (comprobado 29 de 30 veces). 7. var_assigned: Asignación: ndev = valor de retorno NULL de netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 de 1): Desreferenciar valor de retorno nulo (NULL_RETURNS) 8. desreferencia: Desreferenciar un puntero que podría ser NULL ndev al llamar a is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Elimine la implementación manual y use netdev_walk_all_lower_dev() para iterar sobre los dispositivos inferiores. Mientras esté en él, elimine un comentario de parámetro de función obsoleto. A vulnerability was found in the Linux kernel's SMC implementation in the smc_vlan_by_tcpsk() function. • https://git.kernel.org/stable/c/cb9d43f6775457cac75544bc4197f26ac2b6f294 https://git.kernel.org/stable/c/c94cbd262b6aa3b54d73a1ed1f9c0d19df57f4ff https://git.kernel.org/stable/c/bb851d0fb02547d03cd40106b5f2391c4fed6ed1 https://git.kernel.org/stable/c/587acad41f1bc48e16f42bb2aca63bf323380be8 https://access.redhat.com/security/cve/CVE-2021-47559 https://bugzilla.redhat.com/show_bug.cgi?id=2283390 • CWE-476: NULL Pointer Dereference •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47552 – blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
https://notcve.org/view.php?id=CVE-2021-47552
In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? • https://git.kernel.org/stable/c/e03513f58919d9e2bc6df765ca2c9da863d03d90 https://git.kernel.org/stable/c/2a19b28f7929866e1cec92a3619f4de9f2d20005 •
CVSS: 6.5EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47551 – drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
https://notcve.org/view.php?id=CVE-2021-47551
In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: drm/amd/amdkfd: corrige el pánico del kernel cuando el reinicio falla y se activa nuevamente. En la configuración SRIOV, el reinicio puede no lograr que asic vuelva a la normalidad, pero ya se ha llamado a detener cpsch, el No se llamará a start_cpsch ya que en este caso no hay ningún currículum. Cuando el reinicio se activa nuevamente, el controlador debe evitar realizar la desinicialización nuevamente. • https://git.kernel.org/stable/c/74aafe99efb68f15e50be9f7032c2168512f98a8 https://git.kernel.org/stable/c/06c6f8f86ec243b89e52f0c3dc7062bcb9de74df https://git.kernel.org/stable/c/2cf49e00d40d5132e3d067b5aa6d84791929ab15 • CWE-770: Allocation of Resources Without Limits or Throttling •
CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47550 – drm/amd/amdgpu: fix potential memleak
https://notcve.org/view.php?id=CVE-2021-47550
In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix potential memleak In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: drm/amd/amdgpu: corrige una posible fuga de mem en la función amdgpu_get_xgmi_hive, cuando falla kobject_init_and_add Hay una posible fuga de mem si no se llama a kobject_put. • https://git.kernel.org/stable/c/c746945fb6bcbe3863c9ea6369c7ef376e38e5eb https://git.kernel.org/stable/c/75752ada77e0726327adf68018b9f50ae091baeb https://git.kernel.org/stable/c/27dfaedc0d321b4ea4e10c53e4679d6911ab17aa • CWE-401: Missing Release of Memory after Effective Lifetime •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2021-47549 – sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
https://notcve.org/view.php?id=CVE-2021-47549
In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: sata_fsl: corrige UAF en sata_fsl_port_stop cuando rmmod sata_fsl Cuando se ejecuta el comando `rmmod sata_fsl.ko` en el PPC64 GNU/Linux se reporta un error: ====== ==================================================== ========== ERROR: No se puede manejar el acceso a los datos del kernel al leer en 0x80000800805b502c Ups: Acceso al kernel del área defectuosa, firma: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034 ] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Seguimiento de llamadas: .free_irq+0x1c/0x4e0 (no confiable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0. driver_detach+0x64/0xd0 . bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] . • https://git.kernel.org/stable/c/faf0b2e5afe7dae072d2715763c7f992b612b628 https://git.kernel.org/stable/c/cdcd80292106df5cda325426e96495503e41f947 https://git.kernel.org/stable/c/91ba94d3f7afca195b224f77a72044fbde1389ce https://git.kernel.org/stable/c/325ea49fc43cbc03a5e1e37de8f0ca6357ced4b1 https://git.kernel.org/stable/c/0769449b0a5eabc3545337217ae690e46673e73a https://git.kernel.org/stable/c/77393806c76b6b44f1c44bd957788c8bd9152c45 https://git.kernel.org/stable/c/4a46b2f5dce02539e88a300800812bd24a45e097 https://git.kernel.org/stable/c/adf098e2a8a1e1fc075d6a5ba2edd13cf •