CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0CVE-2024-35809 – PCI/PM: Drain runtime-idle callbacks before driver removal
https://notcve.org/view.php?id=CVE-2024-35809
In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks. • https://git.kernel.org/stable/c/9a87375bb586515c0af63d5dcdcd58ec4acf20a6 https://git.kernel.org/stable/c/47d8aafcfe313511a98f165a54d0adceb34e54b1 https://git.kernel.org/stable/c/bbe068b24409ef740657215605284fc7cdddd491 https://git.kernel.org/stable/c/7cc94dd36e48879e76ae7a8daea4ff322b7d9674 https://git.kernel.org/stable/c/900b81caf00c89417172afe0e7e49ac4eb110f4b https://git.kernel.org/stable/c/d86ad8c3e152349454b82f37007ff6ba45f26989 https://git.kernel.org/stable/c/d534198311c345e4b062c4b88bb609efb8bd91d5 https://git.kernel.org/stable/c/6347348c6aba52dda0b33296684cbb627 •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-35805 – dm snapshot: fix lockup in dm_exception_table_exit
https://notcve.org/view.php?id=CVE-2024-35805
In the Linux kernel, the following vulnerability has been resolved: dm snapshot: fix lockup in dm_exception_table_exit There was reported lockup when we exit a snapshot with many exceptions. Fix this by adding "cond_resched" to the loop that frees the exceptions. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: dm snapshot: corregido el bloqueo en dm_exception_table_exit Se informó un bloqueo cuando salimos de un snapshot con muchas excepciones. Solucione este problema agregando "cond_resched" al bucle que libera las excepciones. • https://git.kernel.org/stable/c/e7d4cff57c3c43fdd72342c78d4138f509c7416e https://git.kernel.org/stable/c/9759ff196e7d248bcf8386a7451d6ff8537a7d9c https://git.kernel.org/stable/c/116562e804ffc9dc600adab6326dde31d72262c7 https://git.kernel.org/stable/c/3d47eb405781cc5127deca9a14e24b27696087a1 https://git.kernel.org/stable/c/e50f83061ac250f90710757a3e51b70a200835e2 https://git.kernel.org/stable/c/fa5c055800a7fd49a36bbb52593aca4ea986a366 https://git.kernel.org/stable/c/5f4ad4d0b0943296287313db60b3f84df4aad683 https://git.kernel.org/stable/c/6e7132ed3c07bd8a6ce3db4bb307ef285 •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-35803 – x86/efistub: Call mixed mode boot services on the firmware's stack
https://notcve.org/view.php?id=CVE-2024-35803
In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: x86/efistub: llame a los servicios de arranque en modo mixto en la pila del firmware. • https://git.kernel.org/stable/c/2149f8a56e2ed345c7a4d022a79f6b8fc53ae926 https://git.kernel.org/stable/c/930775060ca348b8665f60eef14b204172d14f31 https://git.kernel.org/stable/c/fba7ee7187581b5bc222003e73e2592b398bb06d https://git.kernel.org/stable/c/725351c036452b7db5771a7bed783564bc4b99cc https://git.kernel.org/stable/c/cefcd4fe2e3aaf792c14c9e56dab89e3d7a65d02 •
CVSS: 6.2EPSS: 0%CPEs: 4EXPL: 0CVE-2024-35799 – drm/amd/display: Prevent crash when disable stream
https://notcve.org/view.php?id=CVE-2024-35799
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent crash when disable stream [Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: drm/amd/display: evita fallos al deshabilitar la transmisión [Por qué] Al deshabilitar el codificador de transmisión se invoca una función que ya no existe. [Cómo] Compruebe si la declaración de función es NULL al desactivar el codificador de flujo. • https://git.kernel.org/stable/c/4356a2c3f296503c8b420ae8adece053960a9f06 https://git.kernel.org/stable/c/59772327d439874095516673b4b30c48bd83ca38 https://git.kernel.org/stable/c/2b17133a0a2e0e111803124dad09e803718d4a48 https://git.kernel.org/stable/c/72d72e8fddbcd6c98e1b02d32cf6f2b04e10bd1c • CWE-400: Uncontrolled Resource Consumption •
CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0CVE-2024-35789 – wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
https://notcve.org/view.php?id=CVE-2024-35789
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: wifi: mac80211: comprobar/borrar fast rx para cambios de VLAN que no sean 4addr sta Al mover una estación fuera de una VLAN y eliminar la VLAN después, la entrada fast_rx todavía contiene un puntero a netdev de la VLAN, lo que puede causar errores de uso después de la liberación. Solucione este problema llamando inmediatamente a ieee80211_check_fast_rx después del cambio de VLAN. • https://git.kernel.org/stable/c/ea9a0cfc07a7d3601cc680718d9cff0d6927a921 https://git.kernel.org/stable/c/be1dd9254fc115321d6fbee042026d42afc8d931 https://git.kernel.org/stable/c/e8b067c4058c0121ac8ca71559df8e2e08ff1a7e https://git.kernel.org/stable/c/c8bddbd91bc8e42c961a5e2cec20ab879f21100f https://git.kernel.org/stable/c/7eeabcea79b67cc29563e6a9a5c81f9e2c664d5b https://git.kernel.org/stable/c/6b948b54c8bd620725e0c906e44b10c0b13087a7 https://git.kernel.org/stable/c/2884a50f52313a7a911de3afcad065ddbb3d78fc https://git.kernel.org/stable/c/e8678551c0243f799b4859448781cbec1 •