Page 199 of 3129 results (0.009 seconds)

CVSS: 7.8EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: drm/i915/hwmon: Get rid of devm When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: drm/i915/hwmon: deshacerse de devm Cuando tanto hwmon como hwmon drvdata (del cual depende hwmon) son recursos administrados por el dispositivo, la expectativa, al desvincular el dispositivo, es que hwmon publicarse antes que drvdata. Sin embargo, en i915 hay dos rutas de código independientes, que liberan drvdata o hwmon y cualquiera de ellas puede publicarse antes que la otra. • https://git.kernel.org/stable/c/cfa73607eb21a4ce1d6294a2c5733628897b48a2 https://git.kernel.org/stable/c/ce5a22d22db691d14516c3b8fdbf69139eb2ea8f https://git.kernel.org/stable/c/5bc9de065b8bb9b8dd8799ecb4592d0403b54281 https://access.redhat.com/security/cve/CVE-2024-39479 https://bugzilla.redhat.com/show_bug.cgi?id=2296059 • CWE-400: Uncontrolled Resource Consumption CWE-416: Use After Free •

CVSS: 5.5EPSS: 0%CPEs: 2EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Do not free stack buffer RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: crypto: starfive: no liberar el búfer de pila Los datos de texto RSA utilizan un búfer de longitud variable asignado en la pila de software. Llamar a kfree provoca un comportamiento indefinido en operaciones posteriores. • https://git.kernel.org/stable/c/5944de192663f272033501dcd322b008fca72006 https://git.kernel.org/stable/c/d7f01649f4eaf1878472d3d3f480ae1e50d98f6c • CWE-770: Allocation of Resources Without Limits or Throttling •

CVSS: 5.5EPSS: 0%CPEs: 16EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with small possibility, the root cause is exactly the same as commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"") However, Dan reported another hang after that, and junxiao investigated the problem and found out that this is caused by plugged bio can't issue from raid5d(). Current implementation in raid5d() has a weird dependence: 1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear MD_SB_CHANGE_PENDING; 2) raid5d() handles IO in a deadloop, until all IO are issued; 3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared; This behaviour is introduce before v2.6, and for consequence, if other context hold 'reconfig_mutex', and md_check_recovery() can't update super_block, then raid5d() will waste one cpu 100% by the deadloop, until 'reconfig_mutex' is released. Refer to the implementation from raid1 and raid10, fix this problem by skipping issue IO if MD_SB_CHANGE_PENDING is still set after md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex' is released. Meanwhile, the hang problem will be fixed as well. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: md/raid5: corrige el punto muerto que raid5d() espera a que se borre MD_SB_CHANGE_PENDING Xiao informó que la prueba lvm2 lvconvert-raid-takeover.sh puede bloquearse con una pequeña posibilidad, la causa principal es exactamente lo mismo que el commit bed9e27baf52 ("Revertir "md/raid5: Espere MD_SB_CHANGE_PENDING en raid5d") Sin embargo, Dan informó otro bloqueo después de eso, y Junxiao investigó el problema y descubrió que esto se debe a que la biografía conectada no puede emitir de raid5d(). La implementación actual en raid5d() tiene una dependencia extraña: 1) md_check_recovery() de raid5d() debe mantener 'reconfig_mutex' para borrar MD_SB_CHANGE_PENDING; 2) raid5d() maneja IO en un bucle muerto, hasta que se emiten todas las IO; 3) IO de raid5d() debe esperar a que se borre MD_SB_CHANGE_PENDING; Este comportamiento se introdujo antes de v2.6 y, como consecuencia, si otro contexto contiene 'reconfig_mutex' y md_check_recovery() no puede actualizar super_block, entonces raid5d() desperdiciará una CPU al 100% mediante el bucle muerto, hasta que 'reconfig_mutex' sea liberado. Consulte la implementación de raid1 y raid10, solucione este problema omitiendo el problema IO si MD_SB_CHANGE_PENDING todavía está configurado después de md_check_recovery(), el hilo del daemon se activará cuando se publique 'reconfig_mutex'. • https://git.kernel.org/stable/c/f3d55bd5b7b928ad82f8075d89c908702f3593ab https://git.kernel.org/stable/c/1c00bb624cd084e2006520ad0edacaff0fb941c4 https://git.kernel.org/stable/c/782b3e71c957991ac8ae53318bc369049d49bb53 https://git.kernel.org/stable/c/9e86dffd0b02594d2e7c60c6db9e889c0395414b https://git.kernel.org/stable/c/5e2cf333b7bd5d3e62595a44d598a254c697cd74 https://git.kernel.org/stable/c/7d808fe6af8409cf9f46ed2b10840e5788985e9b https://git.kernel.org/stable/c/1e8c1c2a92692881ac7ec92dcf1c8a846584251b https://git.kernel.org/stable/c/7f71d9817cea3582daa2e903596461f5f • CWE-667: Improper Locking CWE-833: Deadlock •

CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Handle err return when savagefb_check_var failed The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: fbdev: savage: Maneja el retorno de error cuando falla savagefb_check_var. El commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock es igual a cero") verifica el valor de pixclock para evitar división por error cero. • https://git.kernel.org/stable/c/224453de8505aede1890f007be973925a3edf6a1 https://git.kernel.org/stable/c/84dce0f6a4cc5b7bfd7242ef9290db8ac1dd77ff https://git.kernel.org/stable/c/512ee6d6041e007ef5bf200c6e388e172a2c5b24 https://git.kernel.org/stable/c/8c54acf33e5adaad6374bf3ec1e3aff0591cc8e1 https://git.kernel.org/stable/c/070398d32c5f3ab0e890374904ad94551c76aec4 https://git.kernel.org/stable/c/bc3c2e58d73b28b9a8789fca84778ee165a72d13 https://git.kernel.org/stable/c/04e5eac8f3ab2ff52fa191c187a46d4fdbc1e288 https://git.kernel.org/stable/c/a9ca4e80d23474f90841251f4ac0d941f • CWE-369: Divide By Zero •

CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: xfs: fix log recovery buffer allocation for the legacy h_size fixup Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by mkfs") added a fixup for incorrect h_size values used for the initial umount record in old xfsprogs versions. Later commit 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks") cleaned up the log reover buffer calculation, but stoped using the fixed up h_size value to size the log recovery buffer, which can lead to an out of bounds access when the incorrect h_size does not come from the old mkfs tool, but a fuzzer. Fix this by open coding xlog_logrec_hblks and taking the fixed h_size into account for this calculation. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: xfs: corrige la asignación del búfer de recuperación de registros para la corrección heredada de h_size. El commit a70f9fe52daa ("xfs: detecta y maneja el tamaño de iclog no válido establecido por mkfs") agregó una corrección para los valores incorrectos de h_size usados para el registro desmontaje inicial en versiones antiguas de xfsprogs. Posteriormente, el commit 0c771b99d6c9 ("xfs: cálculo de limpieza de bloques de encabezado LR") limpió el cálculo del búfer de recuperación de registros, pero dejó de usar el valor h_size fijo para dimensionar el búfer de recuperación de registros, lo que puede provocar un acceso fuera de los límites cuando el h_size incorrecto no proviene de la antigua herramienta mkfs, sino de un fuzzer. • https://git.kernel.org/stable/c/0c771b99d6c9a0552fea5cc43669b726dad8f659 https://git.kernel.org/stable/c/f754591b17d0ee91c2b45fe9509d0cdc420527cb https://git.kernel.org/stable/c/57835c0e7152e36b03875dd6c56dfeed685c1b1f https://git.kernel.org/stable/c/c2389c074973aa94e34992e7f66dac0de37595b5 https://git.kernel.org/stable/c/45cf976008ddef4a9c9a30310c9b4fb2a9a6602a https://access.redhat.com/security/cve/CVE-2024-39472 https://bugzilla.redhat.com/show_bug.cgi?id=2296067 • CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CWE-770: Allocation of Resources Without Limits or Throttling •