CVSS: 6.5EPSS: 0%CPEs: 359EXPL: 0CVE-2021-0289 – Junos OS: User-defined ARP Policer isn't applied on Aggregated Ethernet (AE) interface until firewall process is restarted
https://notcve.org/view.php?id=CVE-2021-0289
When user-defined ARP Policer is configured and applied on one or more Aggregated Ethernet (AE) interface units, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability between the Device Control Daemon (DCD) and firewall process (dfwd) daemons of Juniper Networks Junos OS allows an attacker to bypass the user-defined ARP Policer. In this particular case the User ARP policer is replaced with default ARP policer. To review the desired ARP Policers and actual state one can run the command "show interfaces <> extensive" and review the output. See further details below. An example output is: show interfaces extensive | match policer Policer: Input: __default_arp_policer__ <<< incorrect if user ARP Policer was applied on an AE interface and the default ARP Policer is displayed Policer: Input: jtac-arp-ae5.317-inet-arp <<< correct if user ARP Policer was applied on an AE interface For all platforms, except SRX Series: This issue affects Juniper Networks Junos OS: All versions 5.6R1 and all later versions prior to 18.4 versions prior to 18.4R2-S9, 18.4R3-S9 with the exception of 15.1 versions 15.1R7-S10 and later versions; 19.4 versions prior to 19.4R3-S3; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2; This issue does not affect Juniper Networks Junos OS versions prior to 5.6R1. • https://kb.juniper.net/JSA11191 • CWE-367: Time-of-check Time-of-use (TOCTOU) Race Condition •
CVSS: 7.5EPSS: 0%CPEs: 177EXPL: 0CVE-2021-0280 – Junos OS: PTX Series, QFX10K Series: Upon receipt of specific packets BFD sessions might flap due to DDoS policer implementation in Packet Forwarding Engine
https://notcve.org/view.php?id=CVE-2021-0280
Due to an Improper Initialization vulnerability in Juniper Networks Junos OS on PTX platforms and QFX10K Series with Paradise (PE) chipset-based line cards, ddos-protection configuration changes made from the CLI will not take effect as expected beyond the default DDoS (Distributed Denial of Service) settings in the Packet Forwarding Engine (PFE). This may cause BFD sessions to flap when a high rate of specific packets are received. Flapping of BFD sessions in turn may impact routing protocols and network stability, leading to a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms with Paradise (PE) chipset-based line cards: PTX1000, PTX3000 (NextGen), PTX5000, PTX10008, PTX10016 Series and QFX10002 Series. • https://kb.juniper.net/JSA11184 • CWE-665: Improper Initialization •
CVSS: 7.5EPSS: 0%CPEs: 26EXPL: 0CVE-2021-0270 – Junos OS: PTX Series, QFX10K Series: A PTX/QFX FPC may restart unexpectedly with the "inline-Jflow" feature enabled on a large-scale deployment
https://notcve.org/view.php?id=CVE-2021-0270
On PTX Series and QFX10k Series devices with the "inline-jflow" feature enabled, a use after free weakness in the Packet Forwarding Engine (PFE) microkernel architecture of Juniper Networks Junos OS may allow an attacker to cause a Denial of Service (DoS) condition whereby one or more Flexible PIC Concentrators (FPCs) may restart. As this is a race condition situation this issue become more likely to be hit when network instability occurs, such as but not limited to BGP/IGP reconvergences, and/or further likely to occur when more active "traffic flows" are occurring through the device. When this issue occurs, it will cause one or more FPCs to restart unexpectedly. During FPC restarts core files will be generated. While the core file is generated traffic will be disrupted. • https://kb.juniper.net/JSA11161 https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/inline-flow-monitoring-ptx.html • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') CWE-416: Use After Free •
CVSS: 5.9EPSS: 0%CPEs: 124EXPL: 0CVE-2021-0263 – Junos OS: PTX Series: Denial of Service in packet processing due to heavy route churn when J-Flow sampling is enabled
https://notcve.org/view.php?id=CVE-2021-0263
A Data Processing vulnerability in the Multi-Service process (multi-svcs) on the FPC of Juniper Networks Junos OS on the PTX Series routers may lead to the process becoming unresponsive, ultimately affecting traffic forwarding, allowing an attacker to cause a Denial of Service (DoS) condition . The Multi-Service Process running on the FPC is responsible for handling sampling-related operations when a J-Flow configuration is activated. This can occur during periods of heavy route churn, causing the Multi-Service Process to stop processing updates, without consuming any further updates from kernel. This back pressure towards the kernel affects further dynamic updates from other processes in the system, including RPD, causing a KRT-STUCK condition and traffic forwarding issues. An administrator can monitor the following command to check if there is the KRT queue is stuck: user@device > show krt state ... • https://kb.juniper.net/JSA11154 https://www.juniper.net/documentation/en_US/junos/topics/example/flowmonitoring-active-sampling-instance-example.html • CWE-19: Data Processing Errors •
CVSS: 6.8EPSS: 0%CPEs: 344EXPL: 0CVE-2021-0247 – Junos OS: PTX Series, QFX Series: Due to a race condition input loopback firewall filters applied to interfaces may not operate even when listed in the running configuration.
https://notcve.org/view.php?id=CVE-2021-0247
A Race Condition (Concurrent Execution using Shared Resource with Improper Synchronization) vulnerability in the firewall process (dfwd) of Juniper Networks Junos OS allows an attacker to bypass the firewall rule sets applied to the input loopback filter on any interfaces of a device. This issue is detectable by reviewing the PFE firewall rules, as well as the firewall counters and seeing if they are incrementing or not. For example: show firewall Filter: __default_bpdu_filter__ Filter: FILTER-INET-01 Counters: Name Bytes Packets output-match-inet 0 0 <<<<<< missing firewall packet count This issue affects: Juniper Networks Junos OS 14.1X53 versions prior to 14.1X53-D53 on QFX Series; 14.1 versions 14.1R1 and later versions prior to 15.1 versions prior to 15.1R7-S6 on QFX Series, PTX Series; 15.1X53 versions prior to 15.1X53-D593 on QFX Series; 16.1 versions prior to 16.1R7-S7 on QFX Series, PTX Series; 16.2 versions prior to 16.2R2-S11, 16.2R3 on QFX Series, PTX Series; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2 on QFX Series, PTX Series; 17.2 versions prior to 17.2R1-S9, 17.2R3-S3 on QFX Series, PTX Series; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on QFX Series, PTX Series; 17.4 versions prior to 17.4R2-S9, 17.4R3 on QFX Series, PTX Series; 18.1 versions prior to 18.1R3-S9 on QFX Series, PTX Series; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3 on QFX Series, PTX Series; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1 on QFX Series, PTX Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R2-S7, 18.4R3 on QFX Series, PTX Series; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3 on QFX Series, PTX Series; 19.2 versions prior to 19.2R1-S3, 19.2R2 on QFX Series, PTX Series. Una vulnerabilidad de Condición de Carrera (Ejecución Concurrente usando Recursos Compartidos con Sincronización Inapropiada) en el proceso de firewall (dfwd) de Juniper Networks Junos OS, permite a un atacante omitir los conjuntos de reglas de firewall aplicados al filtro de bucle de entrada en cualquier interfaz de un dispositivo. Este problema es detectable al revisar las reglas de firewall de PFE, así como los contadores de firewall y visualizar si aumentan o no. • https://kb.juniper.net/JSA11140 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •