Page 2 of 53 results (0.004 seconds)

CVSS: 8.2EPSS: 0%CPEs: 7EXPL: 0

An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows an unauthenticated, network based attacker to cause increased consumption of resources, ultimately resulting in a Denial of Service (DoS). When specific transit MPLS packets are received by the PFE, these packets are internally forwarded to the Routing Engine (RE), rather than being handled appropriately. Continuous receipt of these MPLS packets causes resources to be exhausted. MPLS config is not required to be affected by this issue.  This issue affects Junos OS Evolved ACX 7000 Series:  * All versions before 21.4R3-S9-EVO, * 22.2-EVO before 22.2R3-S4-EVO,  * 22.3-EVO before 22.3R3-S3-EVO,  * 22.4-EVO before 22.4R3-S2-EVO,  * 23.2-EVO before 23.2R2-EVO,  * 23.4-EVO before 23.4R1-S1-EVO, 23.4R2-EVO. • https://supportportal.juniper.net/JSA83009 • CWE-923: Improper Restriction of Communication Channel to Intended Endpoints •

CVSS: 6.9EPSS: 0%CPEs: 8EXPL: 0

An Improper Handling of Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of the Juniper Networks Junos OS Evolved on ACX Series devices allows an unauthenticated, network based attacker sending specific transit protocol traffic to cause a partial Denial of Service (DoS) to downstream devices. Receipt of specific transit protocol packets is incorrectly processed by the Routing Engine (RE), filling up the DDoS protection queue which is shared between routing protocols. This influx of transit protocol packets causes DDoS protection violations, resulting in protocol flaps which can affect connectivity to networking devices. This issue affects both IPv4 and IPv6. This issue does not require any specific routing protocol to be configured or enabled. The following commands can be used to monitor the DDoS protection queue:        labuser@re0> show evo-pfemand host pkt-stats     labuser@re0> show host-path ddos all-policers This issue affects Junos OS Evolved:  * All versions before 21.4R3-S8-EVO,  * from 22.2 before 22.2R3-S4-EVO,  * from 22.3 before 22.3R3-S4-EVO,  * from 22.4 before 22.4R3-S3-EVO,  * from 23.2 before 23.2R2-EVO,  * from 23.4 before 23.4R1-S1-EVO, 23.4R2-EVO,  * from 24.2 before 24.2R2-EVO. • https://supportportal.juniper.net • CWE-755: Improper Handling of Exceptional Conditions •

CVSS: 8.7EPSS: 0%CPEs: 13EXPL: 0

An Improper Handling of Exceptional Conditions vulnerability in the rpd-server of Juniper Networks Junos OS and Junos OS Evolved within cRPD allows an unauthenticated network-based attacker sending crafted TCP traffic to the routing engine (RE) to cause a CPU-based Denial of Service (DoS). If specially crafted TCP traffic is received by the control plane, or a TCP session terminates unexpectedly, it will cause increased control plane CPU utilization by the rpd-server process. While not explicitly required, the impact is more severe when RIB sharding is enabled. Task accounting shows unexpected reads by the RPD Server jobs for shards: user@junos> show task accounting detail ... read:RPD Server.0.0.0.0+780.192.168.0.78+48886 TOT:00000003.00379787 MAX:00000000.00080516 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+49144 TOT:00000004.00007565 MAX:00000000.00080360 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+49694 TOT:00000003.00600584 MAX:00000000.00080463 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+50246 TOT:00000004.00346998 MAX:00000000.00080338 RUNS: 233888\ This issue affects: Junos OS with cRPD:  * All versions before 21.2R3-S8,  * 21.4 before 21.4R3-S7,  * 22.1 before 22.1R3-S6,  * 22.2 before 22.2R3-S4,  * 22.3 before 22.3R3-S3,  * 22.4 before 22.4R3-S2,  * 23.2 before 23.2R2-S2,  * 24.2 before 24.2R2;  Junos OS Evolved with cRPD:  * All versions before 21.4R3-S7-EVO,  * 22.2 before 22.2R3-S4-EVO,  * 22.3 before 22.3R3-S3-EVO,  * 22.4 before 22.4R3-S2-EVO,  * 23.2 before 23.2R2-EVO. • https://supportportal.juniper.net/JSA88108 • CWE-755: Improper Handling of Exceptional Conditions •

CVSS: 5.1EPSS: 0%CPEs: 9EXPL: 0

An Incorrect Default Permissions vulnerability in the command line interface (CLI) of Juniper Networks Junos OS Evolved allows a low privileged local attacker to view NETCONF traceoptions files, representing an exposure of sensitive information. On all Junos OS Evolved platforms, when NETCONF traceoptions are configured, NETCONF traceoptions files get created with an incorrect group permission, which allows a low-privileged user can access sensitive information compromising the confidentiality of the system. Junos OS Evolved:  * All versions before 20.4R3-S9-EVO,  * 21.2-EVO before 21.2R3-S7-EVO,  * 21.4-EVO before 21.4R3-S5-EVO,  * 22.1-EVO before 22.1R3-S5-EVO,  * 22.2-EVO before 22.2R3-S3-EVO,  * 22.3-EVO before 22.3R3-EVO, 22.3R3-S2-EVO,  * 22.4-EVO before 22.4R3-EVO,  * 23.2-EVO before 23.2R1-S2-EVO, 23.2R2-EVO. • https://supportportal.juniper.net/JSA88106 • CWE-276: Incorrect Default Permissions •

CVSS: 5.4EPSS: 0%CPEs: 7EXPL: 0

An Incorrect Comparison vulnerability in the local address verification API of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker to create sessions or send traffic to the device using the network and broadcast address of the subnet assigned to an interface. This is unintended and unexpected behavior and can allow an attacker to bypass certain compensating controls, such as stateless firewall filters. This issue affects Junos OS Evolved:  * All versions before 21.4R3-S8-EVO,  * 22.2-EVO before 22.2R3-S4-EVO,  * 22.3-EVO before 22.3R3-S4-EVO,  * 22.4-EVO before 22.4R3-S3-EVO,  * 23.2-EVO before 23.2R2-S1-EVO,  * 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO. • https://supportportal.juniper.net/JSA88105 • CWE-697: Incorrect Comparison •