CVSS: 5.9EPSS: 0%CPEs: 215EXPL: 0CVE-2022-22169 – Junos OS and Junos OS Evolved: OSPFv3 session might go into INIT state upon receipt of multiple crafted packets from a trusted neighbor device.
https://notcve.org/view.php?id=CVE-2022-22169
An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker who sends specific packets in certain orders and at specific timings to force OSPFv3 to unexpectedly enter graceful-restart (GR helper mode) even though there is not any Grace-LSA received in OSPFv3 causing a Denial of Service (DoS). Unexpectedly entering GR helper mode might cause the OSPFv3 neighbor adjacency formed on this interface to be stuck in the "INIT" state which can be observed by issuing the following command: user@device> show ospf3 neighbor ID Interface State xx.xx.xx.xx ae100.0 Init <<<<<<<<<< An indicator of compromise can be seen in log files when traceoptions for OSPFv3 are enabled before the issue occurs. These logfile messages are as follows: OSPF restart signaling: Received hello with LR bit set from nbr ip=xx::xx id=xx.xx.xx.xx. Set oob-resync capabilty 1. OSPF Restart Signaling: Start helper mode for nbr ip xx::xx id xx.xx.xx.xx OSPF restart signaling: abort helper mode for nbr ip=xx::xx id=xx.xx.xx.xx OSPF neighbor xx::xx (realm ipv6-unicast <interface.unit> area xx.xx.xx.xx) state changed from Full to Init due to 1WayRcvd (event reason: neighbor is in one-way mode) (nbr helped: 0) This issue affects: Juniper Networks Junos OS. 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S4; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. • https://kb.juniper.net/JSA11276 • CWE-665: Improper Initialization •
CVSS: 6.5EPSS: 0%CPEs: 84EXPL: 0CVE-2022-22168 – Junos OS: vMX and MX150: Specific packets might cause a memory leak and eventually an FPC reboot
https://notcve.org/view.php?id=CVE-2022-22168
An Improper Validation of Specified Type of Input vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated adjacent attacker to trigger a Missing Release of Memory after Effective Lifetime vulnerability. Continued exploitation of this vulnerability will eventually lead to an FPC reboot and thereby a Denial of Service (DoS). This issue affects: Juniper Networks Junos OS on vMX and MX150: All versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2; 21.3 versions prior to 21.3R1-S1, 21.3R2. Una vulnerabilidad de Comprobación Inapropiada del Tipo de Entrada especificado en el kernel del Sistema Operativo Junos de Juniper Networks permite a un atacante adyacente no autenticado desencadenar una vulnerabilidad de Falta de Liberación de Memoria Después del Tiempo de Vida Efectivo. Una explotación continuada de esta vulnerabilidad conllevará finalmente a un reinicio del FPC y, por tanto, una denegación de servicio (DoS). • https://kb.juniper.net/JSA11275 • CWE-401: Missing Release of Memory after Effective Lifetime CWE-1287: Improper Validation of Specified Type of Input •
CVSS: 7.4EPSS: 0%CPEs: 173EXPL: 0CVE-2022-22163 – Junos OS: jdhcpd crashes upon receipt of a specific DHCPv6 packet
https://notcve.org/view.php?id=CVE-2022-22163
An Improper Input Validation vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent unauthenticated attacker to cause a crash of jdhcpd and thereby a Denial of Service (DoS). If a device is configured as DHCPv6 local server and persistent storage is enabled, jdhcpd will crash when receiving a specific DHCPv6 message. This issue affects: Juniper Networks Junos OS All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R2. Una vulnerabilidad de comprobación de entrada inapropiada en el demonio DHCP de Juniper (jdhcpd) del Sistema Operativo Junos de Juniper Networks permite a un atacante adyacente no autenticado causar un bloqueo de jdhcpd y, por tanto, una denegación de servicio (DoS). Si un dispositivo está configurado como servidor local DHCPv6 y el almacenamiento persistente está habilitado, jdhcpd será bloqueado cuando reciba un mensaje DHCPv6 específico. • https://kb.juniper.net/JSA11271 • CWE-20: Improper Input Validation •
CVSS: 7.8EPSS: 0%CPEs: 204EXPL: 0CVE-2022-22162 – Junos OS: A low privileged user can elevate their privileges to the ones of the highest privileged j-web user logged in
https://notcve.org/view.php?id=CVE-2022-22162
A Generation of Error Message Containing Sensitive Information vulnerability in the CLI of Juniper Networks Junos OS allows a locally authenticated attacker with low privileges to elevate these to the level of any other user logged in via J-Web at this time, potential leading to a full compromise of the device. This issue affects Juniper Networks Junos OS: All versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. Una vulnerabilidad de generación de mensajes de error que contienen información confidencial en la CLI de Juniper Networks Junos OS permite a un atacante autenticado localmente con bajos privilegios elevarlos al nivel de cualquier otro usuario conectado por medio de J-Web en ese momento, lo que podría conllevar a un compromiso total del dispositivo. Este problema afecta a Juniper Networks Junos OS: Todas las versiones anteriores a 15.1R7-S11; las versiones 18.3 anteriores a 18.3R3-S6; las versiones 18.4 anteriores a 18.4R2-S9, 18.4R3-S10; las versiones 19.1 anteriores a 19.1R2-S3, 19.1R3-S7; las versiones 19.2 anteriores a 19.2R1-S8, 19.2R3-S4; las versiones 19.3 anteriores a 19.3R3-S4; las versiones 19. 4 versiones anteriores a 19.4R3-S6; 20.1 versiones anteriores a 20.1R3-S2; versiones 20.2 anteriores a 20.2R3-S3; versiones 20.3 anteriores a 20.3R3-S1; versiones 20.4 anteriores a 20.4R3-S1; versiones 21.1 anteriores a 21.1R2-S1, 21.1R3; versiones 21.2 anteriores a 21.2R1-S1, 21.2R2 • https://kb.juniper.net/JSA11270 • CWE-209: Generation of Error Message Containing Sensitive Information •
CVSS: 7.5EPSS: 0%CPEs: 144EXPL: 0CVE-2022-22161 – Junos OS: MX104 might become unresponsive if the out-of-band management port receives a flood of traffic
https://notcve.org/view.php?id=CVE-2022-22161
An Uncontrolled Resource Consumption vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause 100% CPU load and the device to become unresponsive by sending a flood of traffic to the out-of-band management ethernet port. Continued receipted of a flood will create a sustained Denial of Service (DoS) condition. Once the flood subsides the system will recover by itself. An indication that the system is affected by this issue would be that an irq handled by the fman process is shown to be using a high percentage of CPU cycles like in the following example output: user@host> show system processes extensive ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 31 root -84 -187 0K 16K WAIT 22.2H 56939.26% irq96: fman0 This issue affects Juniper Networks Junos OS: All versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2. • https://kb.juniper.net/JSA11269 • CWE-400: Uncontrolled Resource Consumption •