CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0CVE-2024-35809 – PCI/PM: Drain runtime-idle callbacks before driver removal
https://notcve.org/view.php?id=CVE-2024-35809
In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks. • https://git.kernel.org/stable/c/9a87375bb586515c0af63d5dcdcd58ec4acf20a6 https://git.kernel.org/stable/c/47d8aafcfe313511a98f165a54d0adceb34e54b1 https://git.kernel.org/stable/c/bbe068b24409ef740657215605284fc7cdddd491 https://git.kernel.org/stable/c/7cc94dd36e48879e76ae7a8daea4ff322b7d9674 https://git.kernel.org/stable/c/900b81caf00c89417172afe0e7e49ac4eb110f4b https://git.kernel.org/stable/c/d86ad8c3e152349454b82f37007ff6ba45f26989 https://git.kernel.org/stable/c/d534198311c345e4b062c4b88bb609efb8bd91d5 https://git.kernel.org/stable/c/6347348c6aba52dda0b33296684cbb627 •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-35808 – md/dm-raid: don't call md_reap_sync_thread() directly
https://notcve.org/view.php?id=CVE-2024-35808
In the Linux kernel, the following vulnerability has been resolved: md/dm-raid: don't call md_reap_sync_thread() directly Currently md_reap_sync_thread() is called from raid_message() directly without holding 'reconfig_mutex', this is definitely unsafe because md_reap_sync_thread() can change many fields that is protected by 'reconfig_mutex'. However, hold 'reconfig_mutex' here is still problematic because this will cause deadlock, for example, commit 130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix deadlock"). Fix this problem by using stop_sync_thread() to unregister sync_thread, like md/raid did. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: md/dm-raid: no llame a md_reap_sync_thread() directamente Actualmente, se llama a md_reap_sync_thread() desde raid_message() directamente sin mantener presionado 'reconfig_mutex', esto definitivamente no es seguro porque md_reap_sync_thread( ) puede cambiar muchos campos protegidos por 'reconfig_mutex'. Sin embargo, mantener 'reconfig_mutex' aquí sigue siendo problemático porque esto causará un punto muerto, por ejemplo, confirme 130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix deadlock"). Solucione este problema usando stop_sync_thread() para cancelar el registro de sync_thread, como lo hizo md/raid. • https://git.kernel.org/stable/c/be83651f0050ca8621d58d35dad558e9c45cb18f https://git.kernel.org/stable/c/347dcdc15a1706f61aa545ae498ededdf31aeebc https://git.kernel.org/stable/c/9e59b8d76ff511505eb0dd1478329f09e0f04669 https://git.kernel.org/stable/c/cd32b27a66db8776d8b8e82ec7d7dde97a8693b0 •
CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0CVE-2024-35807 – ext4: fix corruption during on-line resize
https://notcve.org/view.php?id=CVE-2024-35807
In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize We observed a corruption during on-line resize of a file system that is larger than 16 TiB with 4k block size. With having more then 2^32 blocks resize_inode is turned off by default by mke2fs. The issue can be reproduced on a smaller file system for convenience by explicitly turning off resize_inode. An on-line resize across an 8 GiB boundary (the size of a meta block group in this setup) then leads to a corruption: dev=/dev/<some_dev> # should be >= 16 GiB mkdir -p /corruption /sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15)) mount -t ext4 $dev /corruption dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15)) sha1sum /corruption/test # 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test /sbin/resize2fs $dev $((2*2**21)) # drop page cache to force reload the block from disk echo 1 > /proc/sys/vm/drop_caches sha1sum /corruption/test # 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test 2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per block group and 2^6 are the number of block groups that make a meta block group. The last checksum might be different depending on how the file is laid out across the physical blocks. The actual corruption occurs at physical block 63*2^15 = 2064384 which would be the location of the backup of the meta block group's block descriptor. • https://git.kernel.org/stable/c/01f795f9e0d67adeccc61a8b20c28acb45fa5fd8 https://git.kernel.org/stable/c/75cc31c2e7193b69f5d25650bda5bb42ed92f8a1 https://git.kernel.org/stable/c/ee4e9c1976147a850f6085a13fca95bcaa00d84c https://git.kernel.org/stable/c/e8e8b197317228b5089ed9e7802dadf3ccaa027a https://git.kernel.org/stable/c/239c669edb2bffa1aa2612519b1d438ab35d6be6 https://git.kernel.org/stable/c/fb1088d51bbaa0faec5a55d4f5818a9ab79e24df https://git.kernel.org/stable/c/37b6a3ba793bbbae057f5b991970ebcc52cb3db5 https://git.kernel.org/stable/c/b461910af8ba3bed80f48c2bf852686d0 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-35805 – dm snapshot: fix lockup in dm_exception_table_exit
https://notcve.org/view.php?id=CVE-2024-35805
In the Linux kernel, the following vulnerability has been resolved: dm snapshot: fix lockup in dm_exception_table_exit There was reported lockup when we exit a snapshot with many exceptions. Fix this by adding "cond_resched" to the loop that frees the exceptions. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: dm snapshot: corregido el bloqueo en dm_exception_table_exit Se informó un bloqueo cuando salimos de un snapshot con muchas excepciones. Solucione este problema agregando "cond_resched" al bucle que libera las excepciones. • https://git.kernel.org/stable/c/e7d4cff57c3c43fdd72342c78d4138f509c7416e https://git.kernel.org/stable/c/9759ff196e7d248bcf8386a7451d6ff8537a7d9c https://git.kernel.org/stable/c/116562e804ffc9dc600adab6326dde31d72262c7 https://git.kernel.org/stable/c/3d47eb405781cc5127deca9a14e24b27696087a1 https://git.kernel.org/stable/c/e50f83061ac250f90710757a3e51b70a200835e2 https://git.kernel.org/stable/c/fa5c055800a7fd49a36bbb52593aca4ea986a366 https://git.kernel.org/stable/c/5f4ad4d0b0943296287313db60b3f84df4aad683 https://git.kernel.org/stable/c/6e7132ed3c07bd8a6ce3db4bb307ef285 •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-35803 – x86/efistub: Call mixed mode boot services on the firmware's stack
https://notcve.org/view.php?id=CVE-2024-35803
In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: x86/efistub: llame a los servicios de arranque en modo mixto en la pila del firmware. • https://git.kernel.org/stable/c/2149f8a56e2ed345c7a4d022a79f6b8fc53ae926 https://git.kernel.org/stable/c/930775060ca348b8665f60eef14b204172d14f31 https://git.kernel.org/stable/c/fba7ee7187581b5bc222003e73e2592b398bb06d https://git.kernel.org/stable/c/725351c036452b7db5771a7bed783564bc4b99cc https://git.kernel.org/stable/c/cefcd4fe2e3aaf792c14c9e56dab89e3d7a65d02 •