CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2021-47587 – net: systemport: Add global locking for descriptor lifecycle
https://notcve.org/view.php?id=CVE-2021-47587
In the Linux kernel, the following vulnerability has been resolved: net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: systemport: agregue bloqueo global para el ciclo de vida del descriptor. La lista de descriptores es un recurso compartido entre todas las colas de transmisión y el mecanismo de bloqueo que se usa hoy solo protege la concurrencia en una cola de transmisión determinada. entre la transmisión y la recuperación. • https://git.kernel.org/stable/c/80105befdb4b8cea924711b40b2462b87df65b62 https://git.kernel.org/stable/c/8ed2f5d08d6e59f8c78b2869bfb95d0be32c094c https://git.kernel.org/stable/c/de57f62f76450b934de8203711bdc4f7953c3421 https://git.kernel.org/stable/c/f3fde37d3f0d429f0fcce214cb52588a9e21260e https://git.kernel.org/stable/c/595a684fa6f23b21958379a18cfa83862c73c2e1 https://git.kernel.org/stable/c/c675256a7f131f5ba3f331efb715e8f31ea0e392 https://git.kernel.org/stable/c/6e1011cd183faae8daff275c72444edcdfe0d473 https://git.kernel.org/stable/c/eb4687c7442942e115420a30185f8d83f •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47585 – btrfs: fix memory leak in __add_inode_ref()
https://notcve.org/view.php?id=CVE-2021-47585
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak in __add_inode_ref() Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } En el kernel de Linux, se resolvió la siguiente vulnerabilidad: btrfs: corrige la pérdida de memoria en __add_inode_ref() La línea 1169 (#3) asigna un fragmento de memoria para victim_name mediante kmalloc(), pero cuando la función regresa en la línea 1184 (#4) victim_name asignado por la línea 1169 (#3) no se libera, lo que provocará una pérdida de memoria. • https://git.kernel.org/stable/c/d3316c8233bb05e0dd855d30aac347bb8ad76ee4 https://git.kernel.org/stable/c/005d9292b5b2e71a009f911bd85d755009b37242 https://git.kernel.org/stable/c/493ff661d434d6bdf02e3a21adae04d7a0b4265d https://git.kernel.org/stable/c/f35838a6930296fc1988764cfa54cb3f705c0665 •
CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47584 – iocost: Fix divide-by-zero on donation from low hweight cgroup
https://notcve.org/view.php?id=CVE-2021-47584
In the Linux kernel, the following vulnerability has been resolved: iocost: Fix divide-by-zero on donation from low hweight cgroup The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: iocost: corrige la división por cero en la donación de un grupo c de bajo peso. La lógica de cálculo de la donación supone que el donante tiene un peso posterior a la donación distinto de cero, por lo que el peso activo más bajo es una donación. cgroup puede tener 2 para poder donar 1 y conservar el otro para sí mismo. • https://git.kernel.org/stable/c/f1de2439ec43b74764f2a26e3a310b24407e3bde https://git.kernel.org/stable/c/a7c80674538f15f85d68138240aae440b8039519 https://git.kernel.org/stable/c/3a1a4eb574178c21241a6200f4785572e661c472 https://git.kernel.org/stable/c/edaa26334c117a584add6053f48d63a988d25a6e •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2021-47583 – media: mxl111sf: change mutex_init() location
https://notcve.org/view.php?id=CVE-2021-47583
In the Linux kernel, the following vulnerability has been resolved: media: mxl111sf: change mutex_init() location Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: medio: mxl111sf: cambiar la ubicación de mutex_init() Syzbot informó que mxl111sf_ctrl_msg() usa un mutex no inicializado. El problema estaba en la ubicación mutex_init() incorrecta. • https://git.kernel.org/stable/c/8572211842afc53c8450fb470f2b8d02ba7592e0 https://git.kernel.org/stable/c/4b2d9600b31f9ba7adbc9f3c54a068615d27b390 https://git.kernel.org/stable/c/96f182c9f48b984447741f054ec301fdc8517035 https://git.kernel.org/stable/c/b99bdf127af91d53919e96292c05f737c45ea59a https://git.kernel.org/stable/c/8c6fdf62bfe1bc72bfceeaf832ef7499c7ed09ba https://git.kernel.org/stable/c/44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f •
CVSS: 3.3EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47582 – USB: core: Make do_proc_control() and do_proc_bulk() killable
https://notcve.org/view.php?id=CVE-2021-47582
In the Linux kernel, the following vulnerability has been resolved: USB: core: Make do_proc_control() and do_proc_bulk() killable The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke usb_start_wait_urb(), which contains an uninterruptible wait with a user-specified timeout value. If timeout value is very large and the device being accessed does not respond in a reasonable amount of time, the kernel will complain about "Task X blocked for more than N seconds", as found in testing by syzbot: INFO: task syz-executor.0:8700 blocked for more than 143 seconds. Not tainted 5.14.0-rc7-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4681 [inline] __schedule+0xc07/0x11f0 kernel/sched/core.c:5938 schedule+0x14b/0x210 kernel/sched/core.c:6017 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85 __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236 proc_bulk drivers/usb/core/devio.c:1273 [inline] usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline] usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713 ... To fix this problem, this patch replaces usbfs's calls to usb_control_msg() and usb_bulk_msg() with special-purpose code that does essentially the same thing (as recommended in the comment for usb_start_wait_urb()), except that it always uses a killable wait and it uses GFP_KERNEL rather than GFP_NOIO. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: USB: core: Hacer que do_proc_control() y do_proc_bulk() se puedan eliminar. Los ioctls USBDEVFS_CONTROL y USBDEVFS_BULK invocan usb_start_wait_urb(), que contiene una espera ininterrumpida con un valor de tiempo de espera especificado por el usuario. Si el valor del tiempo de espera es muy grande y el dispositivo al que se accede no responde en un período de tiempo razonable, el kernel se quejará de "Tarea X bloqueada durante más de N segundos", como se encontró en las pruebas realizadas por syzbot: INFORMACIÓN: tarea syz-executor .0:8700 bloqueado durante más de 143 segundos. • https://git.kernel.org/stable/c/403716741c6c2c510dce44e88f085a740f535de6 https://git.kernel.org/stable/c/ae8709b296d80c7f45aa1f35c0e7659ad69edce1 https://access.redhat.com/security/cve/CVE-2021-47582 https://bugzilla.redhat.com/show_bug.cgi?id=2293247 • CWE-667: Improper Locking •