CVSS: 7.5EPSS: 0%CPEs: 19EXPL: 0CVE-2022-22159 – Junos OS: An attacker sending crafted packets can cause a traffic and CPU Denial of Service (DoS).
https://notcve.org/view.php?id=CVE-2022-22159
A vulnerability in the NETISR network queue functionality of Juniper Networks Junos OS kernel allows an attacker to cause a Denial of Service (DoS) by sending crafted genuine packets to a device. During an attack, the routing protocol daemon (rpd) CPU may reach 100% utilization, yet FPC CPUs forwarding traffic will operate normally. This attack occurs when the attackers' packets are sent over an IPv4 unicast routing equal-cost multi-path (ECMP) unilist selection. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. An indicator of compromise may be to monitor NETISR drops in the network with the assistance of JTAC. • https://kb.juniper.net/JSA11267 •
CVSS: 9.3EPSS: 0%CPEs: 114EXPL: 0CVE-2022-22157 – Junos OS: SRX Series: Traffic classification vulnerability when 'no-syn-check' is enabled
https://notcve.org/view.php?id=CVE-2022-22157
A traffic classification vulnerability in Juniper Networks Junos OS on the SRX Series Services Gateways may allow an attacker to bypass Juniper Deep Packet Inspection (JDPI) rules and access unauthorized networks or resources, when 'no-syn-check' is enabled on the device. JDPI incorrectly classifies out-of-state asymmetric TCP flows as the dynamic-application INCONCLUSIVE instead of UNKNOWN, which is more permissive, causing the firewall to allow traffic to be forwarded that should have been denied. This issue only occurs when 'set security flow tcp-session no-syn-check' is configured on the device. This issue affects Juniper Networks Junos OS on SRX Series: 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R2-S5, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1. • https://kb.juniper.net/JSA11265 • CWE-863: Incorrect Authorization •
CVSS: 7.4EPSS: 0%CPEs: 112EXPL: 1CVE-2022-22156 – Junos OS: Certificate validation is skipped when fetching system scripts from a HTTPS URL
https://notcve.org/view.php?id=CVE-2022-22156
An Improper Certificate Validation weakness in the Juniper Networks Junos OS allows an attacker to perform Person-in-the-Middle (PitM) attacks when a system script is fetched from a remote source at a specified HTTPS URL, which may compromise the integrity and confidentiality of the device. The following command can be executed by an administrator via the CLI to refresh a script from a remote location, which is affected from this vulnerability: >request system scripts refresh-from (commit | event | extension-service | op | snmp) file filename url <https-url> This issue affects: Juniper Networks Junos OS All versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2; 21.1 versions prior to 21.1R1-S1, 21.1R2. Una debilidad de comprobación de certificados inapropiada en el Sistema Operativo Junos de Juniper Networks permite a un atacante llevar a cabo ataques de tipo Person-in-the-Middle (PitM) cuando es obtenida una secuencia de comandos del sistema desde una fuente remota en una URL HTTPS especificada, que puede comprometer la integridad y la confidencialidad del dispositivo. El siguiente comando puede ser ejecutado por un administrador por medio de la CLI para refrescar un script desde una ubicación remota, lo cual está afectado por esta vulnerabilidad: )request system scripts refresh-from (commit | event | extension-service | op | snmp) file filename url (https-url) Este problema afecta a: Juniper Networks Junos OS Todas las versiones anteriores a 18.4R2-S9, 18.4R3-S9; 19.1 versiones anteriores a 19.1R2-S3, 19.1R3-S7; 19.2 versiones anteriores a 19.2R1-S7, 19.2R3-S3; 19.3 versiones anteriores a 19.3R3-S4; 19. 4 versiones anteriores a 19.4R3-S7; 20.1 versiones anteriores a 20.1R2-S2, 20.1R3; 20.2 versiones anteriores a 20.2R3; versiones 20.3 anteriores a 20.3R2-S1, 20.3R3; 20.4 versiones anteriores a 20.4R2; 21.1 versiones anteriores a 21.1R1-S1, 21.1R2 • https://kb.juniper.net/JSA11264 • CWE-295: Improper Certificate Validation CWE-300: Channel Accessible by Non-Endpoint CWE-358: Improperly Implemented Security Check for Standard •
CVSS: 6.5EPSS: 0%CPEs: 81EXPL: 0CVE-2022-22155 – Junos OS: ACX5448: FPC memory leak due to IPv6 neighbor flaps
https://notcve.org/view.php?id=CVE-2022-22155
An Uncontrolled Resource Consumption vulnerability in the handling of IPv6 neighbor state change events in Juniper Networks Junos OS allows an adjacent attacker to cause a memory leak in the Flexible PIC Concentrator (FPC) of an ACX5448 router. The continuous flapping of an IPv6 neighbor with specific timing will cause the FPC to run out of resources, leading to a Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition, requiring a manual PFE restart to restore service. The following error messages will be seen after the FPC resources have been exhausted: fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 This issue only affects the ACX5448 router. No other products or platforms are affected by this vulnerability. • https://kb.juniper.net/JSA11263 • CWE-400: Uncontrolled Resource Consumption CWE-401: Missing Release of Memory after Effective Lifetime CWE-772: Missing Release of Resource after Effective Lifetime •
CVSS: 6.8EPSS: 0%CPEs: 279EXPL: 0CVE-2022-22154 – Junos Fusion: A Satellite Device can be controlled by rewiring it to a foreign AD causing a DoS
https://notcve.org/view.php?id=CVE-2022-22154
In a Junos Fusion scenario an External Control of Critical State Data vulnerability in the Satellite Device (SD) control state machine of Juniper Networks Junos OS allows an attacker who is able to make physical changes to the cabling of the device to cause a denial of service (DoS). An SD can get rebooted and subsequently controlled by an Aggregation Device (AD) which does not belong to the original Fusion setup and is just connected to an extended port of the SD. To carry out this attack the attacker needs to have physical access to the cabling between the SD and the original AD. This issue affects: Juniper Networks Junos OS 16.1R1 and later versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R3-S4. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1. • https://kb.juniper.net/JSA11262 • CWE-642: External Control of Critical State Data CWE-668: Exposure of Resource to Wrong Sphere •