Page 239 of 2810 results (0.012 seconds)

CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: perf/x86/lbr: Filtrar direcciones vsyscall Descubrimos que puede ocurrir un pánico cuando se realiza una vsyscall mientras el muestreo LBR está activo. • https://git.kernel.org/stable/c/403d201d1fd144cb249836dafb222f6375871c6c https://git.kernel.org/stable/c/3863989497652488a50f00e96de4331e5efabc6c https://git.kernel.org/stable/c/f71edacbd4f99c0e12fe4a4007ab4d687d0688db https://git.kernel.org/stable/c/e53899771a02f798d436655efbd9d4b46c0f9265 https://access.redhat.com/security/cve/CVE-2023-52476 https://bugzilla.redhat.com/show_bug.cgi?id=2267041 • CWE-404: Improper Resource Shutdown or Release •

CVSS: 6.1EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e En el kernel de Linux, se resolvió la siguiente vulnerabilidad: Entrada: powermate - corrige el use-after-free en powermate_config_complete syzbot ha encontrado un error de use-after-free [1] en el controlador powermate. Esto sucede cuando el dispositivo está desconectado, lo que genera una memoria libre de la estructura powermate_device. • https://git.kernel.org/stable/c/8677575c4f39d65bf0d719b5d20e8042e550ccb9 https://git.kernel.org/stable/c/67cace72606baf1758fd60feb358f4c6be92e1cc https://git.kernel.org/stable/c/5aa514100aaf59868d745196258269a16737c7bd https://git.kernel.org/stable/c/cd2fbfd8b922b7fdd50732e47d797754ab59cb06 https://git.kernel.org/stable/c/6a4a396386404e62fb59bc3bde48871a64a82b4f https://git.kernel.org/stable/c/2efe67c581a2a6122b328d4bb6f21b3f36f40d46 https://git.kernel.org/stable/c/e528b1b9d60743e0b26224e3fe7aa74c24b8b2f8 https://git.kernel.org/stable/c/5c15c60e7be615f05a45cd905093a54b1 • CWE-416: Use After Free •

CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: tracing: Restructure trace_clock_global() to never block It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? • https://git.kernel.org/stable/c/14131f2f98ac350ee9e73faed916d2238a8b6a0d https://git.kernel.org/stable/c/91ca6f6a91f679c8645d7f3307e03ce86ad518c4 https://git.kernel.org/stable/c/859b47a43f5a0e5b9a92b621dc6ceaad39fb5c8b https://git.kernel.org/stable/c/1fca00920327be96f3318224f502e4d5460f9545 https://git.kernel.org/stable/c/d43d56dbf452ccecc1ec735cd4b6840118005d7c https://git.kernel.org/stable/c/c64da3294a7d59a4bf6874c664c13be892f15f44 https://git.kernel.org/stable/c/a33614d52e97fc8077eb0b292189ca7d964cc534 https://git.kernel.org/stable/c/6e2418576228eeb12e7ba82edb8f95006 • CWE-662: Improper Synchronization CWE-833: Deadlock •

CVSS: 7.8EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1 En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: corrige use-after-free en tw_timer_handler Se encontró un problema de pánico en el mundo real como se muestra a continuación en Linux 5.4. ERROR: no se puede manejar el error de página para la dirección: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Seguimiento de llamadas: call_timer_fn+0x2b/ 0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/ 0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 Este problema también se informó desde 2017 en el hilo [1], desafortunadamente, el problema aún se puede reproducir después de corregir DCCP. ipv4_mib_exit_net se llama antes de tcp_sk_exit_batch cuando se destruye un espacio de nombres de red, ya que tcp_sk_ops está registrado antes de ipv4_mib_ops, lo que significa que tcp_sk_ops está al frente de ipv4_mib_ops en la lista de pernet_list. • https://git.kernel.org/stable/c/61a7e26028b94805fd686a6dc9dbd9941f8f19b0 https://git.kernel.org/stable/c/15579e1301f856ad9385d720c9267c11032a5022 https://git.kernel.org/stable/c/e73164e89d1be561228a4534e1091369ee4ba41a https://git.kernel.org/stable/c/5c2fe20ad37ff56070ae0acb34152333976929b4 https://git.kernel.org/stable/c/a8e1944b44f94f5c5f530e434c5eaee787254566 https://git.kernel.org/stable/c/fe5838c22b986c1190f1dce9aa09bf6a491c1a69 https://git.kernel.org/stable/c/2386e81a1d277f540e1285565c9d41d531bb69d4 https://git.kernel.org/stable/c/08eacbd141e2495d2fcdde84358a06c4f • CWE-416: Use After Free •

CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: Input: appletouch - initialize work before device registration Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device En el kernel de Linux, se resolvió la siguiente vulnerabilidad: Entrada: appletouch: inicializa el trabajo antes del registro del dispositivo Syzbot ha informado una advertencia en __flush_work(). Esta advertencia es causada por work-&gt;func == NULL, lo que significa que falta la inicialización del trabajo. Esto puede suceder, ya que input_dev-&gt;close() llama a cancel_work_sync(&amp;dev-&gt;work), pero la inicialización dev-&gt;work ocurre _después_ de la llamada input_register_device(). Entonces este parche mueve la inicialización dev-&gt;work antes de registrar el dispositivo de entrada • https://git.kernel.org/stable/c/5a6eb676d3bc4d7a6feab200a92437b62ad298da https://git.kernel.org/stable/c/d2cb2bf39a6d17ef4bdc0e59c1a35cf5751ad8f4 https://git.kernel.org/stable/c/d1962f263a176f493400b8f91bfbf2bfedce951e https://git.kernel.org/stable/c/292d2ac61fb0d9276a0f7b7ce4f50426f2a1c99f https://git.kernel.org/stable/c/a02e1404e27855089d2b0a0acc4652c2ce65fe46 https://git.kernel.org/stable/c/975774ea7528b489930b76a77ffc4d5379b95ff2 https://git.kernel.org/stable/c/9f329d0d6c91142cf0ad08d23c72dd195db2633c https://git.kernel.org/stable/c/e79ff8c68acb1eddf709d3ac84716868f • CWE-665: Improper Initialization •