CVSS: 5.5EPSS: 0%CPEs: 14EXPL: 0CVE-2024-26993 – fs: sysfs: Fix reference leak in sysfs_break_active_protection()
https://notcve.org/view.php?id=CVE-2024-26993
In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: fs: sysfs: corrige la fuga de referencia en sysfs_break_active_protection() La rutina sysfs_break_active_protection() tiene una fuga de referencia obvia en su ruta de error. Si la llamada a kernfs_find_and_get() falla, entonces kn será NULL, por lo que no se llamará a la rutina complementaria sysfs_unbreak_active_protection() (y solo causaría una infracción de acceso al intentar eliminar la referencia a kn->parent si se llamara). • https://git.kernel.org/stable/c/2afc9166f79b8f6da5f347f48515215ceee4ae37 https://git.kernel.org/stable/c/e8a37b2fd5b5087bec6cbbf6946ee3caa712953b https://git.kernel.org/stable/c/a6abc93760dd07fcd29760b70e6e7520f22cb288 https://git.kernel.org/stable/c/461a6385e58e8247e6ba2005aa5d1b8d980ee4a2 https://git.kernel.org/stable/c/8a5e02a0f46ea33ed19e48e096a8e8d28e73d10a https://git.kernel.org/stable/c/c984f4d1d40a2f349503b3faf946502ccbf02f9f https://git.kernel.org/stable/c/807d1d299a04e9ad9a9dac55419c1137a105254b https://git.kernel.org/stable/c/f28bba37fe244889b81bb5c508d3f6e5c •
CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0CVE-2024-26982 – Squashfs: check the inode number is not the invalid value of zero
https://notcve.org/view.php?id=CVE-2024-26982
In the Linux kernel, the following vulnerability has been resolved: Squashfs: check the inode number is not the invalid value of zero Syskiller has produced an out of bounds access in fill_meta_index(). That out of bounds access is ultimately caused because the inode has an inode number with the invalid value of zero, which was not checked. The reason this causes the out of bounds access is due to following sequence of events: 1. Fill_meta_index() is called to allocate (via empty_meta_index()) and fill a metadata index. It however suffers a data read error and aborts, invalidating the newly returned empty metadata index. It does this by setting the inode number of the index to zero, which means unused (zero is not a valid inode number). 2. When fill_meta_index() is subsequently called again on another read operation, locate_meta_index() returns the previous index because it matches the inode number of 0. Because this index has been returned it is expected to have been filled, and because it hasn't been, an out of bounds access is performed. This patch adds a sanity check which checks that the inode number is not zero when the inode is created and returns -EINVAL if it is. [phillip@squashfs.org.uk: whitespace fix] Link: https://lkml.kernel.org/r/20240409204723.446925-1-phillip@squashfs.org.uk En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: Squashfs: comprobar que el número de inodo no sea el valor no válido de cero. • https://git.kernel.org/stable/c/be383effaee3d89034f0828038f95065b518772e https://git.kernel.org/stable/c/7def00ebc9f2d6a581ddf46ce4541f84a10680e5 https://git.kernel.org/stable/c/9253c54e01b6505d348afbc02abaa4d9f8a01395 https://access.redhat.com/security/cve/CVE-2024-26982 https://bugzilla.redhat.com/show_bug.cgi?id=2278337 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26981 – nilfs2: fix OOB in nilfs_set_de_type
https://notcve.org/view.php?id=CVE-2024-26981
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix OOB in nilfs_set_de_type The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t mode = inode->i_mode; de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob } However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: nilfs2: corrige OOB en nilfs_set_de_type El tamaño de la matriz nilfs_type_by_mode en el archivo fs/nilfs2/dir.c se define como "S_IFMT >> S_SHIFT", pero la función nilfs_set_de_type() , que utiliza esta matriz, especifica el índice a leer de la matriz de la misma manera que "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t modo = inodo->i_mode; de->tipo_archivo = nilfs_type_by_mode[(modo & S_IFMT)>>S_SHIFT]; // oob } Sin embargo, cuando el índice se determina de esta manera, se produce un error fuera de los límites (OOB) al hacer referencia a un índice que es 1 mayor que el tamaño de la matriz cuando la condición "modo & S_IFMT == S_IFMT" es satisfecho. Por lo tanto, se debe aplicar un parche para cambiar el tamaño de la matriz nilfs_type_by_mode para evitar errores OOB. • https://git.kernel.org/stable/c/2ba466d74ed74f073257f86e61519cb8f8f46184 https://git.kernel.org/stable/c/054f29e9ca05be3906544c5f2a2c7321c30a4243 https://git.kernel.org/stable/c/90f43980ea6be4ad903e389be9a27a2a0018f1c8 https://git.kernel.org/stable/c/7061c7efbb9e8f11ce92d6b4646405ea2b0b4de1 https://git.kernel.org/stable/c/bdbe483da21f852c93b22557b146bc4d989260f0 https://git.kernel.org/stable/c/897ac5306bbeb83e90c437326f7044c79a17c611 https://git.kernel.org/stable/c/2382eae66b196c31893984a538908c3eb7506ff9 https://git.kernel.org/stable/c/90823f8d9ecca3d5fa6b102c8e464c62f •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-26980 – ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
https://notcve.org/view.php?id=CVE-2024-26980
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf(). En el kernel de Linux, se resolvió la siguiente vulnerabilidad: ksmbd: corrige slab-out-of-bounds en smb2_allocate_rsp_buf Si ->ProtocolId es SMB2_TRANSFORM_PROTO_NUM, se podría omitir la validación del tamaño de la solicitud smb2. Si el tamaño de la solicitud es menor que sizeof (struct smb2_query_info_req), la lectura de losa fuera de los límites puede ocurrir en smb2_allocate_rsp_buf(). Este parche asigna un búfer de respuesta después de descifrar la solicitud de transformación. smb3_decrypt_req() validará el tamaño de la solicitud de transformación y evitará la losa fuera de los límites en smb2_allocate_rsp_buf(). • https://git.kernel.org/stable/c/da21401372607c49972ea87a6edaafb36a17c325 https://git.kernel.org/stable/c/b80ba648714e6d790d69610cf14656be222d0248 https://git.kernel.org/stable/c/3160d9734453a40db248487f8204830879c207f1 https://git.kernel.org/stable/c/0977f89722eceba165700ea384f075143f012085 https://git.kernel.org/stable/c/c119f4ede3fa90a9463f50831761c28f989bfb20 •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-26936 – ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
https://notcve.org/view.php?id=CVE-2024-26936
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ksmbd: validar el tamaño del búfer de solicitud en smb2_allocate_rsp_buf() El búfer de respuesta debe asignarse en smb2_allocate_rsp_buf antes de validar la solicitud. Pero los campos en el payload y el encabezado smb2 se usan en smb2_allocate_rsp_buf(). • https://git.kernel.org/stable/c/8f3d0bf1d0c62b539d54c5b9108a845cff619b99 https://git.kernel.org/stable/c/21ff9d7d223c5c19cb4334009e4c0c83a2f4d674 https://git.kernel.org/stable/c/5c20b242d4fed73a93591e48bfd9772e2322fb11 https://git.kernel.org/stable/c/2c27a64a2bc47d9bfc7c3cf8be14be53b1ee7cb6 https://git.kernel.org/stable/c/17cf0c2794bdb6f39671265aa18aea5c22ee8c4a •