CVSS: 4.4EPSS: 0%CPEs: 4EXPL: 0CVE-2024-38540 – bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
https://notcve.org/view.php?id=CVE-2024-38540
In the Linux kernel, the following vulnerability has been resolved: bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0. In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called. roundup_pow_of_two is documented as undefined for 0. Fix it in the one caller that had this combination. The undefined behavior was detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4 Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.7 10/25/2023 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x30 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xec __roundup_pow_of_two+0x25/0x35 [bnxt_re] bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re] bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re] bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? • https://git.kernel.org/stable/c/0c4dcd602817502bb3dced7a834a13ef717d65a4 https://git.kernel.org/stable/c/a658f011d89dd20cf2c7cb4760ffd79201700b98 https://git.kernel.org/stable/c/627493443f3a8458cb55cdae1da254a7001123bc https://git.kernel.org/stable/c/8b799c00cea6fcfe5b501bbaeb228c8821acb753 https://git.kernel.org/stable/c/78cfd17142ef70599d6409cbd709d94b3da58659 https://access.redhat.com/security/cve/CVE-2024-38540 https://bugzilla.redhat.com/show_bug.cgi?id=2293459 • CWE-125: Out-of-bounds Read •
CVSS: 7.1EPSS: 0%CPEs: 5EXPL: 0CVE-2024-38538 – net: bridge: xmit: make sure we have at least eth header len bytes
https://notcve.org/view.php?id=CVE-2024-38538
In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f En el kernel de Linux, se resolvió la siguiente vulnerabilidad: net: bridge: xmit: asegúrese de tener al menos el encabezado eth len bytes syzbot desencadenó un error de valor uninit[1] en la ruta xmit del dispositivo puente al enviar un mensaje corto (menos de ETH_HLEN bytes) skb. Para solucionarlo, compruebe si realmente podemos retirar esa cantidad en lugar de suponerla. Probado con dropwatch: soltar en: br_dev_xmit+0xb93/0x12d0 [puente] (0xffffffffc06739b3) origen: marca de tiempo del software: lunes 13 de mayo 11:31:53 2024 778214037 protocolo nsec: 0x88a8 longitud: 2 longitud original: 2 motivo de caída: PKT_TOO_SMALL [1 ] ERROR: KMSAN: valor uninit en br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [en línea] netdev_start_xmit include/linux/netdevice.h:4917 [en línea] xmit_one net/core/dev.c:3531 [en línea] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev .c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [en línea] __bpf_tx_skb net/core/filter.c:2136 [en línea] __bpf_redirect_common net/core/filter.c:2180 [en línea] __bpf_redirect+0x14a6/0x1620 net/ Core/Filter.C: 2187 ____BPF_CLONE_REDIRECT NET/CORE/FILTRO.C: 2460 [Inline] BPF_CLONE_REDIRECT+0x328/0x470 NET/Core/Filter.c: 2432 ___ BPF_PROG_RUN+0X13FE/0XE0F0 KERNEL/BPF/BPF/CORE. 0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [en línea] __bpf_prog_run include/linux/filter.h:657 [en línea] bpf_prog_run include/linux/filter.h:664 [en línea ] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 pf+0x6aa/0xd90 núcleo/ bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [en línea] __se_sys_bpf kernel/bpf/syscall.c:5765 [en línea] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 ys_call+0x96b /0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [en línea] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 Entry_SYSCALL_64_after_hwframe+ 0x77/0x7f • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 https://git.kernel.org/stable/c/28126b83f86ab9cc7936029c2dff845d3dcedba2 https://git.kernel.org/stable/c/1abb371147905ba250b4cc0230c4be7e90bea4d5 https://git.kernel.org/stable/c/f482fd4ce919836a49012b2d31b00fc36e2488f2 https://git.kernel.org/stable/c/5b5d669f569807c7ab07546e73c0741845a2547a https://git.kernel.org/stable/c/8bd67ebb50c0145fd2ca8681ab65eb7e8cde1afc https://access.redhat.com/security/cve/CVE-2024-38538 https://bugzilla.redhat.com/show_bug.cgi?id=2293461 • CWE-99: Improper Control of Resource Identifiers ('Resource Injection') •
CVSS: 5.5EPSS: 0%CPEs: 7EXPL: 0CVE-2024-36978 – net: sched: sch_multiq: fix possible OOB write in multiq_tune()
https://notcve.org/view.php?id=CVE-2024-36978
In the Linux kernel, the following vulnerability has been resolved: net: sched: sch_multiq: fix possible OOB write in multiq_tune() q->bands will be assigned to qopt->bands to execute subsequent code logic after kmalloc. So the old q->bands should not be used in kmalloc. Otherwise, an out-of-bounds write will occur. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net: sched: sch_multiq: corrige posible escritura OOB en multiq_tune() q->bands se asignarán a qopt->bands para ejecutar la lógica de código posterior después de kmalloc. Por lo tanto, las antiguas q->bands no deberían usarse en kmalloc. De lo contrario, se producirá una escritura fuera de los límites. • https://git.kernel.org/stable/c/c2999f7fb05b87da4060e38150c70fa46794d82b https://git.kernel.org/stable/c/d5d9d241786f49ae7cbc08e7fc95a115e9d80f3d https://git.kernel.org/stable/c/52b1aa07cda6a199cd6754d3798c7759023bc70f https://git.kernel.org/stable/c/598572c64287aee0b75bbba4e2881496878860f3 https://git.kernel.org/stable/c/0f208fad86631e005754606c3ec80c0d44a11882 https://git.kernel.org/stable/c/54c2c171c11a798fe887b3ff72922aa9d1411c1e https://git.kernel.org/stable/c/d6fb5110e8722bc00748f22caeb650fe4672f129 https://git.kernel.org/stable/c/affc18fdc694190ca7575b9a86632a73b •
CVSS: -EPSS: 0%CPEs: 6EXPL: 0CVE-2024-36975 – KEYS: trusted: Do not use WARN when encode fails
https://notcve.org/view.php?id=CVE-2024-36975
In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Do not use WARN when encode fails When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: LLAVES: confiable: no usar WARN cuando falla la codificación Cuando falla asn1_encode_sequence(), WARN no es la solución correcta. 1. asn1_encode_sequence() no es una función interna (ubicada en lib/asn1_encode.c). 2. Se conoce la ubicación, lo que hace que el seguimiento de la pila sea inútil. 3. • https://git.kernel.org/stable/c/f2219745250f388edacabe6cca73654131c67d0a https://git.kernel.org/stable/c/96f650995c70237b061b497c66755e32908f8972 https://git.kernel.org/stable/c/681935009fec3fc22af97ee312d4a24ccf3cf087 https://git.kernel.org/stable/c/1c652e1e10676f942149052d9329b8bf2703529a https://git.kernel.org/stable/c/d32c6e09f7c4bec3ebc4941323f0aa6366bc1487 https://git.kernel.org/stable/c/ff91cc12faf798f573dab2abc976c1d5b1862fea https://git.kernel.org/stable/c/050bf3c793a07f96bd1e2fd62e1447f731ed733b •
CVSS: -EPSS: 0%CPEs: 7EXPL: 0CVE-2024-36974 – net/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP
https://notcve.org/view.php?id=CVE-2024-36974
In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided, taprio_parse_mqprio_opt() must validate it, or userspace can inject arbitrary data to the kernel, the second time taprio_change() is called. First call (with valid attributes) sets dev->num_tc to a non zero value. Second call (with arbitrary mqprio attributes) returns early from taprio_parse_mqprio_opt() and bad things can happen. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net/sched: taprio: validar siempre TCA_TAPRIO_ATTR_PRIOMAP Si se ha proporcionado un atributo TCA_TAPRIO_ATTR_PRIOMAP, taprio_parse_mqprio_opt() debe validarlo, o el espacio de usuario puede inyectar datos arbitrarios al kernel, la segunda vez taprio_change () se llama. La primera llamada (con atributos válidos) establece dev->num_tc en un valor distinto de cero. La segunda llamada (con atributos mqprio arbitrarios) regresa temprano desde taprio_parse_mqprio_opt() y pueden suceder cosas malas. • https://git.kernel.org/stable/c/a3d43c0d56f1b94e74963a2fbadfb70126d92213 https://git.kernel.org/stable/c/c6041e7124464ce7e896ee3f912897ce88a0c4ec https://git.kernel.org/stable/c/6db4af09987cc5d5f0136bd46148b0e0460dae5b https://git.kernel.org/stable/c/d3dde4c217f0c31ab0621912e682b57e677dd923 https://git.kernel.org/stable/c/0bf6cc96612bd396048f57d63f1ad454a846e39c https://git.kernel.org/stable/c/724050ae4b76e4fae05a923cb54101d792cf4404 https://git.kernel.org/stable/c/c37a27a35eadb59286c9092c49c241270c802ae2 https://git.kernel.org/stable/c/f921a58ae20852d188f70842431ce6519 •