CVSS: 7.5EPSS: 0%CPEs: 151EXPL: 0CVE-2020-1684 – Junos OS: SRX Series: High CPU load due to processing for HTTP traffic when Application Identification is enabled.
https://notcve.org/view.php?id=CVE-2020-1684
On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2. En Juniper Networks SRX Series configurada con la inspección de identificación de aplicaciones habilitada, la recepción de tráfico HTTP específico puede conllevar una alta utilización de la carga de la CPU, lo que podría conllevar a una interrupción del tráfico. • https://kb.juniper.net/JSA11081 • CWE-400: Uncontrolled Resource Consumption •
CVSS: 5.3EPSS: 0%CPEs: 237EXPL: 0CVE-2020-1661 – Junos OS: jdhcpd process crash when forwarding a malformed DHCP packet.
https://notcve.org/view.php?id=CVE-2020-1661
On Juniper Networks Junos OS devices configured as a DHCP forwarder, the Juniper Networks Dynamic Host Configuration Protocol Daemon (jdhcp) process might crash when receiving a malformed DHCP packet. This issue only affects devices configured as DHCP forwarder with forward-only option, that forward specified DHCP client packets, without creating a new subscriber session. The jdhcpd daemon automatically restarts without intervention, but continuous receipt of the malformed DHCP packet will repeatedly crash jdhcpd, leading to an extended Denial of Service (DoS) condition. This issue can be triggered only by DHCPv4, it cannot be triggered by DHCPv6. This issue affects Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S16; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 14.1X53 versions prior to 14.1X53-D60 on EX and QFX Series; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230 on SRX Series; 15.1X53 versions prior to 15.1X53-D593 on EX2300/EX3400; 16.1 versions prior to 16.1R7-S5. • https://kb.juniper.net/JSA11056 •
CVSS: 7.5EPSS: 0%CPEs: 97EXPL: 0CVE-2020-1657 – Junos OS: SRX Series: An attacker sending spoofed packets to IPSec peers may cause a Denial of Service.
https://notcve.org/view.php?id=CVE-2020-1657
On SRX Series devices, a vulnerability in the key-management-daemon (kmd) daemon of Juniper Networks Junos OS allows an attacker to spoof packets targeted to IPSec peers before a security association (SA) is established thereby causing a failure to set up the IPSec channel. Sustained receipt of these spoofed packets can cause a sustained Denial of Service (DoS) condition. This issue affects IPv4 and IPv6 implementations. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D90; 15.1X49 versions prior to 15.1X49-D190; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S6, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2. This issue does not affect 12.3 or 15.1 releases which are non-SRX Series releases. • https://kb.juniper.net/JSA11050 • CWE-408: Incorrect Behavior Order: Early Amplification •
CVSS: 8.8EPSS: 1%CPEs: 326EXPL: 0CVE-2020-1656 – Junos OS: When a DHCPv6 Relay-Agent is configured upon receipt of a specific DHCPv6 client message, Remote Code Execution may occur.
https://notcve.org/view.php?id=CVE-2020-1656
The DHCPv6 Relay-Agent service, part of the Juniper Enhanced jdhcpd daemon shipped with Juniper Networks Junos OS has an Improper Input Validation vulnerability which will result in a Denial of Service (DoS) condition when a DHCPv6 client sends a specific DHPCv6 message allowing an attacker to potentially perform a Remote Code Execution (RCE) attack on the target device. Continuous receipt of the specific DHCPv6 client message will result in an extended Denial of Service (DoS) condition. If adjacent devices are also configured to relay DHCP packets, and are not affected by this issue and simply transparently forward unprocessed client DHCPv6 messages, then the attack vector can be a Network-based attack, instead of an Adjacent-device attack. No other DHCP services are affected. Receipt of the packet without configuration of the DHCPv6 Relay-Agent service, will not result in exploitability of this issue. • https://kb.juniper.net/JSA11049 https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show-dhcpv6-relay-statistics.html https://www.juniper.net/documentation/en_US/junos/topics/topic-map/dhcp-relay-agent-security-devices.html https://www.juniper.net/documentation/en_US/junos/topics/topic-map/dhcpv6-relay-agent-overview.html • CWE-20: Improper Input Validation CWE-476: NULL Pointer Dereference •
CVSS: 5.5EPSS: 0%CPEs: 250EXPL: 0CVE-2020-1643 – Junos OS: EX Series: RPD crash when executing specific "show ospf interface" commands from the CLI with OSPF authentication configured
https://notcve.org/view.php?id=CVE-2020-1643
Execution of the "show ospf interface extensive" or "show ospf interface detail" CLI commands on a Juniper Networks device running Junos OS may cause the routing protocols process (RPD) to crash and restart if OSPF interface authentication is configured, leading to a Denial of Service (DoS). By continuously executing the same CLI commands, a local attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Note: Only systems utilizing ARM processors, found on the EX2300 and EX3400, are vulnerable to this issue. Systems shipped with other processor architectures are not vulnerable to this issue. The processor architecture can be displayed via the 'uname -a' command. • https://kb.juniper.net/JSA11030 • CWE-755: Improper Handling of Exceptional Conditions •