CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-39301 – net/9p: fix uninit-value in p9_client_rpc()
https://notcve.org/view.php?id=CVE-2024-39301
25 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: net/9p: fix uninit-value in p9_client_rpc() Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+... • https://git.kernel.org/stable/c/348b59012e5c6402741d067cf6eeeb6271999d06 •
CVSS: 3.3EPSS: 0%CPEs: 8EXPL: 0CVE-2024-37078 – nilfs2: fix potential kernel bug due to lack of writeback flag waiting
https://notcve.org/view.php?id=CVE-2024-37078
25 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential kernel bug due to lack of writeback flag waiting Destructive writes to a block device on which nilfs2 is mounted can cause a kernel bug in the folio/page writeback start routine or writeback end routine (__folio_start_writeback in the log below): kernel BUG at mm/page-writeback.c:3070! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI ... RIP: 0010:__folio_start_writeback+0xbaa/0x10e0 Code: 25 ff 0f 00 00 0f 84 18 ... • https://git.kernel.org/stable/c/9ff05123e3bfbb1d2b68ba1d9bf1f7d1dffc1453 •
CVSS: 7.8EPSS: 0%CPEs: 4EXPL: 0CVE-2024-37021 – fpga: manager: add owner module and take its refcount
https://notcve.org/view.php?id=CVE-2024-37021
24 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer ... • https://git.kernel.org/stable/c/654ba4cc0f3ed7c0f08bfb39f66059d8c42943ee •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-39292 – um: Add winch to winch_handlers before registering winch IRQ
https://notcve.org/view.php?id=CVE-2024-39292
24 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_r... • https://git.kernel.org/stable/c/42a359e31a0e438b5b978a8f0fecdbd3c86bb033 • CWE-415: Double Free •
CVSS: 6.3EPSS: 0%CPEs: 8EXPL: 0CVE-2024-38659 – enic: Validate length of nl attributes in enic_set_vf_port
https://notcve.org/view.php?id=CVE-2024-38659
21 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: enic: Validate length of nl attributes in enic_set_vf_port enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE is of length PORT_PROFILE_MAX and that the nl attributes IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX. These attributes are validated (in the function do_setlink in rtnetlink.c) using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE as NLA_STRING, IFLA_PORT_INSTANCE_UUID... • https://git.kernel.org/stable/c/f8bd909183acffad68780b10c1cdf36161cfd5d1 •
CVSS: 7.0EPSS: 0%CPEs: 8EXPL: 0CVE-2024-38637 – greybus: lights: check return of get_channel_from_mode
https://notcve.org/view.php?id=CVE-2024-38637
21 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: greybus: lights: check return of get_channel_from_mode If channel for the given node is not found we return null from get_channel_from_mode. Make sure we validate the return pointer before using it in two of the missing places. This was originally reported in [0]: Found by Linux Verification Center (linuxtesting.org) with SVACE. [0] https://lore.kernel.org/all/20240301190425.120605-1-m.lobanov@rosalinux.ru En el kernel de Linux, se resolvió... • https://git.kernel.org/stable/c/2870b52bae4c81823ffcb3ed2b0626fb39d64f48 •
CVSS: 5.5EPSS: 0%CPEs: 7EXPL: 0CVE-2024-38635 – soundwire: cadence: fix invalid PDI offset
https://notcve.org/view.php?id=CVE-2024-38635
21 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: soundwire: cadence: fix invalid PDI offset For some reason, we add an offset to the PDI, presumably to skip the PDI0 and PDI1 which are reserved for BPT. This code is however completely wrong and leads to an out-of-bounds access. We were just lucky so far since we used only a couple of PDIs and remained within the PDI array bounds. A Fixes: tag is not provided since there are no known platforms where the out-of-bounds would be accessed, and... • https://git.kernel.org/stable/c/002364b2d594a9afc0385c09e00994c510b1d089 • CWE-125: Out-of-bounds Read •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-38634 – serial: max3100: Lock port->lock when calling uart_handle_cts_change()
https://notcve.org/view.php?id=CVE-2024-38634
21 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Lock port->lock when calling uart_handle_cts_change() uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100... • https://git.kernel.org/stable/c/7831d56b0a3544cbb6f82f76c34ca95e24d5b676 •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-38633 – serial: max3100: Update uart_driver_registered on driver removal
https://notcve.org/view.php?id=CVE-2024-38633
21 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Update uart_driver_registered on driver removal The removal of the last MAX3100 device triggers the removal of the driver. However, code doesn't update the respective global variable and after insmod — rmmod — insmod cycle the kernel oopses: max3100 spi-PRP0001:01: max3100_probe: adding port 0 BUG: kernel NULL pointer dereference, address: 0000000000000408 ... RIP: 0010:serial_core_register_port+0xa0/0x840 ... max3100_probe... • https://git.kernel.org/stable/c/7831d56b0a3544cbb6f82f76c34ca95e24d5b676 •
CVSS: 7.8EPSS: 0%CPEs: 3EXPL: 0CVE-2024-38630 – watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
https://notcve.org/view.php?id=CVE-2024-38630
21 Jun 2024 — In the Linux kernel, the following vulnerability has been resolved: watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger When the cpu5wdt module is removing, the origin code uses del_timer() to de-activate the timer. If the timer handler is running, del_timer() could not stop it and will return directly. If the port region is released by release_region() and then the timer handler cpu5wdt_trigger() calls outb() to write into the region that is released, the use-after-free bug will happen. C... • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 •