CVSS: 4.4EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26810 – vfio/pci: Lock external INTx masking ops
https://notcve.org/view.php?id=CVE-2024-26810
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Lock external INTx masking ops Mask operations through config space changes to DisINTx may race INTx configuration changes via ioctl. Create wrappers that add locking for paths outside of the core interrupt code. In particular, irq_type is updated holding igate, therefore testing is_intx() requires holding igate. For example clearing DisINTx from config space can otherwise race changes of the interrupt configuration. This aligns interfaces which may trigger the INTx eventfd into two camps, one side serialized by igate and the other only enabled while INTx is configured. A subsequent patch introduces synchronization for the latter flows. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: vfio/pci: bloquear operaciones de enmascaramiento INTx externas Las operaciones de enmascaramiento a través de cambios en el espacio de configuración a DisINTx pueden acelerar los cambios de configuración de INTx a través de ioctl. • https://git.kernel.org/stable/c/89e1f7d4c66d85f42c3d52ea3866eb10cadf6153 https://git.kernel.org/stable/c/1e71b6449d55179170efc8dee8664510bb813b42 https://git.kernel.org/stable/c/3dd9be6cb55e0f47544e7cdda486413f7134e3b3 https://git.kernel.org/stable/c/ec73e079729258a05452356cf6d098bf1504d5a6 https://git.kernel.org/stable/c/3fe0ac10bd117df847c93408a9d428a453cd60e5 https://git.kernel.org/stable/c/04a4a017b9ffd7b0f427b8c376688d14cb614651 https://git.kernel.org/stable/c/6fe478d855b20ac1eb5da724afe16af5a2aaaa40 https://git.kernel.org/stable/c/03505e3344b0576fd619416793a31eae9 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: -EPSS: 0%CPEs: 13EXPL: 0CVE-2024-26805 – netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter
https://notcve.org/view.php?id=CVE-2024-26805
In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter syzbot reported the following uninit-value access issue [1]: netlink_to_full_skb() creates a new `skb` and puts the `skb->data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data(). This `len` is based on `skb->end` that is not data offset but buffer offset. The `skb->end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb->end` to `skb->len`, which is the actual data offset. BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] sock_read_iter+0x467/0x580 net/socket.c:1136 call_read_iter include/linux/fs.h:2014 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x8f6/0xe00 fs/read_write.c:470 ksys_read+0x20f/0x4c0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x93/0xd0 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was stored to memory at: skb_put_data include/linux/skbuff.h:2622 [inline] netlink_to_full_skb net/netlink/af_netlink.c:181 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline] __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline] netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline] netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: free_pages_prepare mm/page_alloc.c:1087 [inline] free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533 release_pages+0x23d3/0x2410 mm/swap.c:1042 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316 tlb_batch_pages ---truncated--- En el kernel de Linux, se resolvió la siguiente vulnerabilidad: netlink: Fix kernel-infoleak-after-free en __skb_datagram_iter syzbot informó el siguiente problema de acceso al valor uninit [1]: netlink_to_full_skb() crea un nuevo `skb` y coloca el ` skb->data` pasó como primer argumento de netlink_to_full_skb() al nuevo `skb`. • https://git.kernel.org/stable/c/1853c949646005b5959c483becde86608f548f24 https://git.kernel.org/stable/c/92994a5f49d0a81c8643452d5c0a6e8b31d85a61 https://git.kernel.org/stable/c/85aec6328f3346b0718211faad564a3ffa64f60e https://git.kernel.org/stable/c/d38200098e3203ba30ba06ed3f345ec6ca75234c https://git.kernel.org/stable/c/65d48c630ff80a19c39751a4a6d3315f4c3c0280 https://git.kernel.org/stable/c/62f43b58d2b2c4f0200b9ca2b997f4c484f0272f https://git.kernel.org/stable/c/ec343a55b687a452f5e87f3b52bf9f155864df65 https://git.kernel.org/stable/c/9ae51361da43270f4ba0eb924427a07e8 •
CVSS: 5.5EPSS: 0%CPEs: 7EXPL: 0CVE-2024-26804 – net: ip_tunnel: prevent perpetual headroom growth
https://notcve.org/view.php?id=CVE-2024-26804
In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: prevent perpetual headroom growth syzkaller triggered following kasan splat: BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191 [..] kasan_report+0xda/0x110 mm/kasan/report.c:588 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline] ___skb_get_hash net/core/flow_dissector.c:1791 [inline] __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856 skb_get_hash include/linux/skbuff.h:1556 [inline] ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592 ... ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 .. iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 ... The splat occurs because skb->data points past skb->head allocated area. This is because neigh layer does: __skb_pull(skb, skb_network_offset(skb)); ... but skb_network_offset() returns a negative offset and __skb_pull() arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value. The negative value is returned because skb->head and skb->data distance is more than 64k and skb->network_header (u16) has wrapped around. The bug is in the ip_tunnel infrastructure, which can cause dev->needed_headroom to increment ad infinitum. The syzkaller reproducer consists of packets getting routed via a gre tunnel, and route of gre encapsulated packets pointing at another (ipip) tunnel. The ipip encapsulation finds gre0 as next output device. This results in the following pattern: 1). First packet is to be sent out via gre0. Route lookup found an output device, ipip0. 2). ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future output device, rt.dev->needed_headroom (ipip0). 3). ip output / start_xmit moves skb on to ipip0. which runs the same code path again (xmit recursion). 4). Routing step for the post-gre0-encap packet finds gre0 as output device to use for ipip0 encapsulated packet. tunl0->needed_headroom is then incremented based on the (already bumped) gre0 device headroom. This repeats for every future packet: gre0->needed_headroom gets inflated because previous packets' ipip0 step incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0 needed_headroom was increased. For each subsequent packet, gre/ipip0->needed_headroom grows until post-expand-head reallocations result in a skb->head/data distance of more than 64k. Once that happens, skb->network_header (u16) wraps around when pskb_expand_head tries to make sure that skb_network_offset() is unchanged after the headroom expansion/reallocation. After this skb_network_offset(skb) returns a different (and negative) result post headroom expansion. The next trip to neigh layer (or anything else that would __skb_pull the network header) makes skb->data point to a memory location outside skb->head area. v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to prevent perpetual increase instead of dropping the headroom increment completely. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net: ip_tunnel: evita el crecimiento perpetuo del espacio libre syzkaller activado después de kasan splat: ERROR: KASAN: use-after-free en __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 Lectura del tamaño 1 en la dirección ffff88812fb4000e mediante la tarea syz-executor183/5191 [..] kasan_report+0xda/0x110 mm/kasan/report.c:588 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 skb_flow_dissect_flow_key incluir/linux /skbuff.h:1514 [en línea] ___skb_get_hash net/core/flow_dissector.c:1791 [en línea] __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856 skb_get_hash include/linux/skbuff.h:1556 [en línea] ip_tunnel_xmit +0x1855/0x33c0 net/ipv4/ip_tunnel.c:748 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4940 [en línea] netdev_start_xmit include/linux/netdevice.h:4954 [en línea] xmit_one net/core/dev.c:3548 [en línea] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice .h:3134 [en línea] neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592 ... ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c :323 .. iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665 __netdev_start_xmit incluir /linux /netdevice.h:4940 [en línea] netdev_start_xmit include/linux/netdevice.h:4954 [en línea] xmit_one net/core/dev.c:3548 [en línea] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 . .. • https://git.kernel.org/stable/c/243aad830e8a4cdda261626fbaeddde16b08d04a https://git.kernel.org/stable/c/f81e94d2dcd2397137edcb8b85f4c5bed5d22383 https://git.kernel.org/stable/c/2e95350fe9db9d53c701075060ac8ac883b68aee https://git.kernel.org/stable/c/afec0c5cd2ed71ca95a8b36a5e6d03333bf34282 https://git.kernel.org/stable/c/ab63de24ebea36fe73ac7121738595d704b66d96 https://git.kernel.org/stable/c/a0a1db40b23e8ff86dea2786c5ea1470bb23ecb9 https://git.kernel.org/stable/c/049d7989c67e8dd50f07a2096dbafdb41331fb9b https://git.kernel.org/stable/c/5ae1e9922bbdbaeb9cfbe91085ab75927 •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26801 – Bluetooth: Avoid potential use-after-free in hci_error_reset
https://notcve.org/view.php?id=CVE-2024-26801
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Avoid potential use-after-free in hci_error_reset While handling the HCI_EV_HARDWARE_ERROR event, if the underlying BT controller is not responding, the GPIO reset mechanism would free the hci_dev and lead to a use-after-free in hci_error_reset. Here's the call trace observed on a ChromeOS device with Intel AX201: queue_work_on+0x3e/0x6c __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>] ? init_wait_entry+0x31/0x31 __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>] hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>] process_one_work+0x1d8/0x33f worker_thread+0x21b/0x373 kthread+0x13a/0x152 ? pr_cont_work+0x54/0x54 ? kthread_blkcg+0x31/0x31 ret_from_fork+0x1f/0x30 This patch holds the reference count on the hci_dev while processing a HCI_EV_HARDWARE_ERROR event to avoid potential crash. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: Bluetooth: evite el posible use-after-free en hci_error_reset Mientras se maneja el evento HCI_EV_HARDWARE_ERROR, si el controlador BT subyacente no responde, el mecanismo de reinicio de GPIO liberaría hci_dev y provocaría un error. use-after-free en hci_error_reset. • https://git.kernel.org/stable/c/c7741d16a57cbf97eebe53f27e8216b1ff20e20c https://git.kernel.org/stable/c/e0b278650f07acf2e0932149183458468a731c03 https://git.kernel.org/stable/c/98fb98fd37e42fd4ce13ff657ea64503e24b6090 https://git.kernel.org/stable/c/6dd0a9dfa99f8990a08eb8fdd8e79bee31c7d8e2 https://git.kernel.org/stable/c/da4569d450b193e39e87119fd316c0291b585d14 https://git.kernel.org/stable/c/45085686b9559bfbe3a4f41d3d695a520668f5e1 https://git.kernel.org/stable/c/2ab9a19d896f5a0dd386e1f001c5309bc35f433b https://git.kernel.org/stable/c/dd594cdc24f2e48dab441732e6dfcafd6 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26793 – gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
https://notcve.org/view.php?id=CVE-2024-26793
In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_newlink() The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? • https://git.kernel.org/stable/c/459aa660eb1d8ce67080da1983bb81d716aa5a69 https://git.kernel.org/stable/c/01129059d5141d62fae692f7a336ae3bc712d3eb https://git.kernel.org/stable/c/ec92aa2cab6f0048f10d6aa4f025c5885cb1a1b6 https://git.kernel.org/stable/c/e668b92a3a01429923fd5ca13e99642aab47de69 https://git.kernel.org/stable/c/9376d059a705c5dfaac566c2d09891242013ae16 https://git.kernel.org/stable/c/abd32d7f5c0294c1b2454c5a3b13b18446bac627 https://git.kernel.org/stable/c/93dd420bc41531c9a31498b9538ca83ba6ec191e https://git.kernel.org/stable/c/5366969a19a8a0d2ffb3d27ef6e8905e5 •