CVSS: 7.5EPSS: 0%CPEs: 69EXPL: 0CVE-2021-31383 – Junos OS and Junos OS Evolved: In Point to MultiPoint (P2MP) scenarios receipt of various crafted packets causes RPD to core.
https://notcve.org/view.php?id=CVE-2021-31383
In Point to MultiPoint (P2MP) scenarios within established sessions between network or adjacent neighbors the improper use of a source to destination copy write operation combined with a Stack-based Buffer Overflow on certain specific packets processed by the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved sent by a remote unauthenticated network attacker causes the RPD to crash causing a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1. Juniper Networks Junos OS Evolved 20.1 versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO. • https://kb.juniper.net/JSA11251 • CWE-121: Stack-based Buffer Overflow CWE-787: Out-of-bounds Write •
CVSS: 9.0EPSS: 0%CPEs: 412EXPL: 0CVE-2021-31382 – Junos OS: PTX1000 System, PTX10002-60C System: After upgrading, configured firewall filters may be applied on incorrect interfaces
https://notcve.org/view.php?id=CVE-2021-31382
On PTX1000 System, PTX10002-60C System, after upgrading to an affected release, a Race Condition vulnerability between the chassis daemon (chassisd) and firewall process (dfwd) of Juniper Networks Junos OS, may update the device's interfaces with incorrect firewall filters. This issue only occurs when upgrading the device to an affected version of Junos OS. Interfaces intended to have protections may have no protections assigned to them. Interfaces with one type of protection pattern may have alternate protections assigned to them. Interfaces intended to have no protections may have protections assigned to them. • https://kb.juniper.net/JSA11250 https://kb.juniper.net/KB10956 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: 7.5EPSS: 0%CPEs: 176EXPL: 1CVE-2021-31379 – Junos OS: MX Series: MPC 7/8/9/10/11 cards with MAP-E: PFE halts when an attacker sends malformed IPv4 or IPv6 traffic inside the MAP-E tunnel.
https://notcve.org/view.php?id=CVE-2021-31379
An Incorrect Behavior Order vulnerability in the MAP-E automatic tunneling mechanism of Juniper Networks Junos OS allows an attacker to send certain malformed IPv4 or IPv6 packets to cause a Denial of Service (DoS) to the PFE on the device which is disabled as a result of the processing of these packets. Continued receipt and processing of these malformed IPv4 or IPv6 packets will create a sustained Denial of Service (DoS) condition. This issue only affects MPC 7/8/9/10/11 cards, when MAP-E IP reassembly is enabled on these cards. An indicator of compromise is the output: FPC ["FPC ID" # e.g. "0"] PFE #{PFE ID # e.g. "1"] : Fabric Disabled Example: FPC 0 PFE #1 : Fabric Disabled when using the command: show chassis fabric fpcs An example of a healthy result of the command use would be: user@device-re1> show chassis fabric fpcs Fabric management FPC state: FPC 0 PFE #0 Plane 0: Plane enabled Plane 1: Plane enabled Plane 2: Plane enabled Plane 3: Plane enabled Plane 4: Plane enabled Plane 5: Plane enabled Plane 6: Plane enabled Plane 7: Plane enabled This issue affects: Juniper Networks Junos OS on MX Series with MPC 7/8/9/10/11 cards, when MAP-E IP reassembly is enabled on these cards. 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S8, 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1. • https://kb.juniper.net/JSA11247 https://www.juniper.net/documentation/en_US/junos/topics/topic-map/map-e-configuring.html • CWE-696: Incorrect Behavior Order •
CVSS: 7.5EPSS: 0%CPEs: 210EXPL: 0CVE-2021-31378 – Junos OS: An attacker sending spoofed RADIUS messages to a Junos OS device configured for broadband services may cause broadband subscribers to remain stuck in a "Terminating" state.
https://notcve.org/view.php?id=CVE-2021-31378
In broadband environments, including but not limited to Enhanced Subscriber Management, (CHAP, PPP, DHCP, etc.), on Juniper Networks Junos OS devices where RADIUS servers are configured for managing subscriber access and a subscriber is logged in and then requests to logout, the subscriber may be forced into a "Terminating" state by an attacker who is able to send spoofed messages appearing to originate from trusted RADIUS server(s) destined to the device in response to the subscriber's request. These spoofed messages cause the Junos OS General Authentication Service (authd) daemon to force the broadband subscriber into this "Terminating" state which the subscriber will not recover from thereby causing a Denial of Service (DoS) to the endpoint device. Once in the "Terminating" state, the endpoint subscriber will no longer be able to access the network. Restarting the authd daemon on the Junos OS device will temporarily clear the subscribers out of the "Terminating" state. As long as the attacker continues to send these spoofed packets and subscribers request to be logged out, the subscribers will be returned to the "Terminating" state thereby creating a persistent Denial of Service to the subscriber. • https://kb.juniper.net/JSA11246 https://www.juniper.net/documentation/us/en/software/junos/subscriber-mgmt-sessions/topics/topic-map/general-authentication-service-events-tracing.html • CWE-772: Missing Release of Resource after Effective Lifetime •
CVSS: 5.5EPSS: 0%CPEs: 256EXPL: 0CVE-2021-31377 – Junos OS: A local authenticated attacker can cause RPD to core
https://notcve.org/view.php?id=CVE-2021-31377
An Incorrect Permission Assignment for Critical Resource vulnerability of a certain file in the filesystem of Junos OS allows a local authenticated attacker to cause routing process daemon (RPD) to crash and restart, causing a Denial of Service (DoS). Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S7; 19.1 versions prior to 19.1R2-S3, 19.1R3-S5; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R1-S1, 20.4R2. Una vulnerabilidad de Asignación Incorrecta de Permisos para Recursos Críticos de un determinado archivo del sistema de archivos de Junos OS permite a un atacante local autenticado causar el bloqueo y el reinicio del demonio de proceso de enrutamiento (RPD), causando una Denegación de Servicio (DoS). Las acciones repetidas del atacante crearán una condición de Denegación de Servicio (DoS) sostenida. • https://kb.juniper.net/JSA11242 • CWE-732: Incorrect Permission Assignment for Critical Resource •