CVSS: 7.1EPSS: 0%CPEs: 2EXPL: 0CVE-2024-58094 – jfs: add check read-only before truncation in jfs_truncate_nolock()
https://notcve.org/view.php?id=CVE-2024-58094
16 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before truncation in jfs_truncate_nolock() Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the functio... • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 •
CVSS: 4.9EPSS: 0%CPEs: 4EXPL: 0CVE-2025-22022 – usb: xhci: Apply the link chain quirk on NEC isoc endpoints
https://notcve.org/view.php?id=CVE-2025-22022
16 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Apply the link chain quirk on NEC isoc endpoints Two clearly different specimens of NEC uPD720200 (one with start/stop bug, one without) were seen to cause IOMMU faults after some Missed Service Errors. Faulting address is immediately after a transfer ring segment and patched dynamic debug messages revealed that the MSE was received when waiting for a TD near the end of that segment: [ 1.041954] xhci_hcd: Miss service interval er... • https://git.kernel.org/stable/c/a4931d9fb99eb5462f3eaa231999d279c40afb21 •
CVSS: 5.5EPSS: 0%CPEs: 9EXPL: 0CVE-2025-22018 – atm: Fix NULL pointer dereference
https://notcve.org/view.php?id=CVE-2025-22018
16 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: atm: Fix NULL pointer dereference When MPOA_cache_impos_rcvd() receives the msg, it can trigger Null Pointer Dereference Vulnerability if both entry and holding_time are NULL. Because there is only for the situation where entry is NULL and holding_time exists, it can be passed when both entry and holding_time are NULL. If these are NULL, the entry will be passd to eg_cache_put() as parameter and it is referenced by entry->use code in it. ka... • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 •
CVSS: 9.8EPSS: 0%CPEs: 7EXPL: 0CVE-2025-22008 – regulator: check that dummy regulator has been probed before using it
https://notcve.org/view.php?id=CVE-2025-22008
08 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: regulator: check that dummy regulator has been probed before using it Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: regulador: comprobar que el regulador ficticio haya sido probado antes de usarlo Debido al sondeo asincrónico del controlador existe la posibilidad de que el regulador ficticio ... • https://git.kernel.org/stable/c/3a9c46af5654783f99015727ac65bc2a23e2735a •
CVSS: 7.8EPSS: 0%CPEs: 8EXPL: 0CVE-2025-22004 – net: atm: fix use after free in lec_send()
https://notcve.org/view.php?id=CVE-2025-22004
03 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free. In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free. Michael Randrianantenaina discovered that the Bluetooth driver in the Linux Kernel c... • https://git.kernel.org/stable/c/1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 • CWE-416: Use After Free •
CVSS: 9.8EPSS: 0%CPEs: 8EXPL: 0CVE-2025-21993 – iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
https://notcve.org/view.php?id=CVE-2025-21993
02 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message. In the Linux kernel, the f... • https://git.kernel.org/stable/c/a858cd58dea06cf85b142673deea8c5d87f11e70 • CWE-125: Out-of-bounds Read •
CVSS: 9.8EPSS: 0%CPEs: 8EXPL: 0CVE-2025-21992 – HID: ignore non-functional sensor in HP 5MP Camera
https://notcve.org/view.php?id=CVE-2025-21992
02 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: HID: ignore non-functional sensor in HP 5MP Camera The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. [453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff [453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:... • https://git.kernel.org/stable/c/9af297aea8f76a0ad21f2de5f2cd6401a748b9c3 •
CVSS: 9.8EPSS: 0%CPEs: 8EXPL: 0CVE-2025-21971 – net_sched: Prevent creation of classes with TC_H_ROOT
https://notcve.org/view.php?id=CVE-2025-21971
01 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: net_sched: Prevent creation of classes with TC_H_ROOT The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination condition when traversing up the qdisc tree to update parent backlog counters. However, if a class is created with classid TC_H_ROOT, the traversal terminates prematurely at this class instead of reaching the actual root qdisc, causing parent statistics to be incorrectly maintained. In case of DRR, this could lead t... • https://git.kernel.org/stable/c/066a3b5b2346febf9a655b444567b7138e3bb939 •
CVSS: 7.8EPSS: 0%CPEs: 4EXPL: 0CVE-2025-21969 – Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
https://notcve.org/view.php?id=CVE-2025-21969
01 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9... • https://git.kernel.org/stable/c/c96cce853542b3b13da3738f35ef1be8cfcc9d1d • CWE-416: Use After Free •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2025-21957 – scsi: qla1280: Fix kernel oops when debug level > 2
https://notcve.org/view.php?id=CVE-2025-21957
01 Apr 2025 — In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 A null dereference or oops exception will eventually occur when qla1280.c driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I think its clear from the code that the intention here is sg_dma_len(s) not length of sg_next(s) when printing the debug info. In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 ... • https://git.kernel.org/stable/c/afa27b7c17a48e01546ccaad0ab017ad0496a522 •