Page 272 of 5243 results (0.008 seconds)

CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c En el kernel de Linux, se resolvió la siguiente vulnerabilidad: can: mcba_usb: repara la pérdida de memoria en mcba_usb. Syzbot informó una pérdida de memoria en el controlador SocketCAN para la herramienta Microchip CAN BUS Analyzer. El problema estaba en usb_coherent no liberado. En mcba_usb_start() se asignan 20 buffers coherentes y no hay nada que los libere: 1) En la función de devolución de llamada, la urb se vuelve a enviar y eso es todo 2) En la función de desconexión, las urbs simplemente se eliminan, pero URB_FREE_BUFFER no está configurado (ver mcba_usb_start) y Esta bandera no se puede utilizar con buffers coherentes. • https://git.kernel.org/stable/c/51f3baad7de943780ce0c17bd7975df567dd6e14 https://git.kernel.org/stable/c/89df95ce32be204eef2e7d4b2f6fb552fb191a68 https://git.kernel.org/stable/c/a115198caaab6d663bef75823a3c5f0802306d60 https://git.kernel.org/stable/c/6f87c0e21ad20dd3d22108e33db1c552dfa352a0 https://git.kernel.org/stable/c/6bd3d80d1f019cefa7011056c54b323f1d8b8e83 https://git.kernel.org/stable/c/d0760a4ef85697bc756d06eae17ae27f3f055401 https://git.kernel.org/stable/c/91c02557174be7f72e46ed7311e3bea1939840b0 •

CVSS: 6.6EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: KVM: x86: restablece inmediatamente el contexto de MMU cuando se borra el indicador SMM Restablece inmediatamente el contexto de MMU cuando se borra el indicador SMM de la vCPU para que el indicador SMM en la función MMU esté siempre sincronizado con el indicador de la vCPU. Si RSM falla (que no se emula correctamente), KVM se retirará sin llamar a post_leave_smm() y dejará la MMU en mal estado. • https://git.kernel.org/stable/c/9ec19493fb86d6d5fbf9286b94ff21e56ef66376 https://git.kernel.org/stable/c/cbb425f62df9df7abee4b3f068f7ed6ffc3561e2 https://git.kernel.org/stable/c/669a8866e468fd020d34eb00e08cb41d3774b71b https://git.kernel.org/stable/c/df9a40cfb3be2cbeb1c17bb67c59251ba16630f3 https://git.kernel.org/stable/c/78fcb2c91adfec8ce3a2ba6b4d0dda89f2f4a7c6 • CWE-476: NULL Pointer Dereference •

CVSS: -EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: PCI: aardvark: Fix kernel panic during PIO transfer Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: PCI: aardvark: solucionó el pánico del kernel durante la transferencia de PIO. Intentar iniciar una nueva transferencia de PIO escribiendo el valor 0 en el registro PIO_START cuando la transferencia anterior aún no se ha completado (que se indica con el valor 1). en PIO_START) provoca un aborto externo en la CPU, lo que resulta en pánico del kernel: Interrupción de SError en CPU0, código 0xbf000002 - Pánico del kernel de SError - no se sincroniza: Interrupción de SError asincrónica Para evitar el pánico del kernel, es necesario rechazar una nueva transferencia de PIO cuando el anterior aún no ha terminado. • https://git.kernel.org/stable/c/400e6b1860c8be61388d0b77814c53260f96e17a https://git.kernel.org/stable/c/b00a9aaa4be20ad6e3311fb78a485eae0899e89a https://git.kernel.org/stable/c/4c90f90a91d75c3c73dd633827c90e8746d9f54d https://git.kernel.org/stable/c/1a1dbc4473974867fe8c5f195c17b341c8e82867 https://git.kernel.org/stable/c/3d213a4ddf49a860be6e795482c17f87e0c82b2a https://git.kernel.org/stable/c/f18139966d072dab8e4398c95ce955a9742e04f7 •

CVSS: 6.2EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: Make sure to free skb when it is completely used With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: net:ll_temac: Asegúrate de liberar skb cuando esté completamente utilizado. Con el puntero skb acoplado en la BD TX, tenemos una forma sencilla y eficaz de liberar el buffer skb. cuando la trama ha sido transmitida. Pero para evitar liberar el skb mientras todavía hay fragmentos del skb en uso, debemos aprovechar el BD TX del skb, no el primero. Sin esto, estamos haciendo use after free en el lado DMA, cuando el primer BD de un paquete BD de transmisión múltiple se considera completado en xmit_done y los BD restantes todavía se están procesando. • https://git.kernel.org/stable/c/6d120ab4dc39a543c6b63361e1d0541c382900a3 https://git.kernel.org/stable/c/019ab7d044d0ebf97e1236bb8935b7809be92358 https://git.kernel.org/stable/c/e8afe05bd359ebe12a61dbdc94c06c00ea3e8d4b https://git.kernel.org/stable/c/6aa32217a9a446275440ee8724b1ecaf1838df47 •

CVSS: -EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net: bridge: corrige la desreferencia del puntero null del túnel vlan dst Este parche corrige una desreferencia del puntero null de Tunnel_dst debido al acceso sin bloqueo en la ruta de salida del túnel. • https://git.kernel.org/stable/c/11538d039ac6efcf4f1a6c536e1b87cd3668a9fd https://git.kernel.org/stable/c/ad7feefe7164892db424c45687472db803d87f79 https://git.kernel.org/stable/c/24a6e55f17aa123bc1fc54b7d3c410b41bc16530 https://git.kernel.org/stable/c/a2241e62f6b4a774d8a92048fdf59c45f6c2fe5c https://git.kernel.org/stable/c/fe0448a3fad365a747283a00a1d1ad5e8d6675b7 https://git.kernel.org/stable/c/abb02e05cb1c0a30dd873a29f33bc092067dc35d https://git.kernel.org/stable/c/58e2071742e38f29f051b709a5cca014ba51166f •