Page 28 of 268 results (0.007 seconds)

CVSS: 7.4EPSS: 0%CPEs: 268EXPL: 0

A signal handler race condition exists in the Layer 2 Address Learning Daemon (L2ALD) of Juniper Networks Junos OS due to the absence of a specific protection mechanism to avoid a race condition which may allow an attacker to bypass the storm-control feature on devices. This issue is a corner case and only occurs during specific actions taken by an administrator of a device under certain specifics actions which triggers the event. The event occurs less frequently on devices which are not configured with Virtual Chassis configurations, and more frequently on devices configured in Virtual Chassis configurations. This issue is not specific to any particular Junos OS platform. An Indicator of Compromise (IoC) may be seen by reviewing log files for the following error message seen by executing the following show statement: show log messages | grep storm Result to look for: /kernel: GENCFG: op 58 (Storm Control Blob) failed; err 1 (Unknown) This issue affects: Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D49 on EX Series; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D191, 15.1X49-D200 on SRX Series; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11, 16.2R3; 17.1 versions prior to 17.1R2-S11, 17.1R3; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R2-S6, 18.2R3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2; 19.1 versions prior to 19.1R1-S4, 19.1R2. • https://kb.juniper.net/JSA11137 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •

CVSS: 6.5EPSS: 0%CPEs: 226EXPL: 0

On Juniper Networks EX4300-MP Series, EX4600 Series, EX4650 Series, QFX5K Series deployed as a Virtual Chassis with a specific Layer 2 circuit configuration, Packet Forwarding Engine manager (FXPC) process may crash and restart upon receipt of specific layer 2 frames. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series, EX4650 Series, QFX5K Series 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4, 17.4R3-S5; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2; En Juniper Networks Serie EX4300-MP, Serie EX4600, Serie EX4650, Serie QFX5K implementadas como un Virtual Chassis con una configuración de circuito de capa 2 específica, el proceso del Packet Forwarding Engine manager (FXPC) puede bloquearse y reiniciarse al recibir tramas de capa 2 específicas. La recepción y el procesamiento continuo de este paquete crearán una condición sostenida de Denegación de Servicio (DoS). Este problema afecta a: Juniper Networks Junos OS en las versiones Serie EX4300-MP, Serie EX4600, Serie EX4650, Serie QFX5K versiones 15.1 anteriores a 15.1R7-S9; versiones 17.3 anteriores a 17.3R3-S11; versiones 17.4 anteriores a 17.4R2-S13, 17.4R3-S4, 17.4R3-S5; versiones 18.2 anteriores a 18.2R3-S8; versiones 18.3 anteriores a 18.3R3-S4; versiones 18.4 anteriores a 18.4R2-S7, 18.4R3-S6; versiones 19.1 anteriores a 19.1R3-S4; versiones 19.2 anteriores a 19.2R1-S6, 19.2R3-S1; versiones 19.3 anteriores a 19.3R3-S1; versiones 19.4 anteriores a 19.4R2-S4, 19.4R3-S1; versiones 20.1 anteriores a 20.1R2; versiones 20.2 anteriores a 20.2R2, 20.2R3; versiones 20.3 anteriores a 20.3R1-S2, 20.3R2; • https://kb.juniper.net/JSA11132 •

CVSS: 5.3EPSS: 0%CPEs: 260EXPL: 0

An uncontrolled resource consumption vulnerability in Message Queue Telemetry Transport (MQTT) server of Juniper Networks Junos OS allows an attacker to cause MQTT server to crash and restart leading to a Denial of Service (DoS) by sending a stream of specific packets. A Juniper Extension Toolkit (JET) application designed with a listening port uses the Message Queue Telemetry Transport (MQTT) protocol to connect to a mosquitto broker that is running on Junos OS to subscribe for events. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: 16.1R1 and later versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S1, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1. • https://kb.juniper.net/JSA11124 • CWE-400: Uncontrolled Resource Consumption •

CVSS: 6.5EPSS: 0%CPEs: 241EXPL: 0

An improper check for unusual or exceptional conditions vulnerability in Juniper Networks MX Series platforms with Trio-based MPC (Modular Port Concentrator) deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, may allow an attacker sending specific Layer 2 traffic to cause Distributed Denial of Service (DDoS) protection to trigger unexpectedly, resulting in traffic impact. Continued receipt and processing of this specific Layer 2 frames will sustain the Denial of Service (DoS) condition. An indication of compromise is to check DDOS LACP violations: user@device> show ddos-protection protocols statistics brief | match lacp This issue only affects the MX Series platforms with Trio-based MPC. No other products or platforms are affected. This issue affects: Juniper Networks Junos OS on MX Series: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2; Una vulnerabilidad comprobación inapropiada para condiciones inusuales o excepcionales en las plataformas Juniper Networks MX Series con MPC (Modular Port Concentrator) basado en Trio implementado en (Ethernet VPN) EVPN- (Virtual Extensible LAN) configuración VXLAN, puede permitir a un atacante enviar tráfico específico de Capa 2 para causar que la protección de Denegación de Servicio distribuida (DDoS) se active inesperadamente, resultando en un impacto en el tráfico. • https://kb.juniper.net/JSA11123 • CWE-754: Improper Check for Unusual or Exceptional Conditions •

CVSS: 7.8EPSS: 0%CPEs: 197EXPL: 0

A local privilege escalation vulnerability in telnetd.real of Juniper Networks Junos OS may allow a locally authenticated shell user to escalate privileges and execute arbitrary commands as root. telnetd.real is shipped with setuid permissions enabled and is owned by the root user, allowing local users to run telnetd.real with root privileges. This issue affects Juniper Networks Junos OS: all versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R2. Una vulnerabilidad de escalada de privilegios local en telnetd.real de Juniper Networks Junos OS, puede permitir a un usuario de shell autenticado local escalar privilegios y ejecutar comandos arbitrarios como root. telnetd.real es enviado con permisos setuid habilitados y es propiedad del usuario root, permitiendo a usuarios locales ejecutar telnetd.real con privilegios root. Este problema afecta a Juniper Networks Junos OS: todas las versiones anteriores a 15.1R7-S9; versiones 17.3 anteriores a 17.3R3-S11; versiones 17.4 anteriores a 17.4R2-S12, 17.4R3-S3; versiones 18.1 anteriores a 18.1R3-S11; versiones 18.2 anteriores a 18.2R3-S6; versiones 18.3 anteriores a 18.3R2-S4, 18.3R3-S4; versiones 18.4 anteriores a 18.4R2-S7, 18.4R3-S6; versiones 19.1 anteriores a 19.1R2-S2, 19.1R3-S4; versiones 19.2 anteriores a 19.2R1-S6, 19.2R3-S1; versiones 19.3 anteriores a 19.3R3-S1; versiones 19.4 anteriores a 19.4R2-S2, 19.4R3; versiones 20.1 anteriores a 20. • https://kb.juniper.net/JSA11114 • CWE-250: Execution with Unnecessary Privileges CWE-269: Improper Privilege Management •