CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26763 – dm-crypt: don't modify the data when using authenticated encryption
https://notcve.org/view.php?id=CVE-2024-26763
In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/ En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: dm-crypt: no modifica los datos cuando se utiliza cifrado autenticado Se dijo que el cifrado autenticado podría producir etiquetas no válidas cuando se modifican los datos que se están cifrando [1]. Entonces, solucione este problema copiando primero los datos en la biografía del clon y luego cifrándolos dentro de la biografía del clon. Esto puede reducir el rendimiento, pero es necesario para evitar que el usuario dañe el dispositivo escribiendo datos con O_DIRECT y modificándolos al mismo tiempo. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/ • https://git.kernel.org/stable/c/43a202bd552976497474ae144942e32cc5f34d7e https://git.kernel.org/stable/c/0dccbb93538fe89a86c6de31d4b1c8c560848eaa https://git.kernel.org/stable/c/3c652f6fa1e1f9f02c3fbf359d260ad153ec5f90 https://git.kernel.org/stable/c/1a4371db68a31076afbe56ecce34fbbe6c80c529 https://git.kernel.org/stable/c/e08c2a8d27e989f0f5b0888792643027d7e691e6 https://git.kernel.org/stable/c/64ba01a365980755732972523600a961c4266b75 https://git.kernel.org/stable/c/d9e3763a505e50ba3bd22846f2a8db99429fb857 https://git.kernel.org/stable/c/50c70240097ce41fe6bce6478b8047828 •
CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0CVE-2024-26759 – mm/swap: fix race when skipping swapcache
https://notcve.org/view.php?id=CVE-2024-26759
In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! • https://git.kernel.org/stable/c/0bcac06f27d7528591c27ac2b093ccd71c5d0168 https://git.kernel.org/stable/c/2dedda77d4493f3e92e414b272bfa60f1f51ed95 https://git.kernel.org/stable/c/305152314df82b22cf9b181f3dc5fc411002079a https://git.kernel.org/stable/c/d183a4631acfc7af955c02a02e739cec15f5234d https://git.kernel.org/stable/c/13ddaf26be324a7f951891ecd9ccd04466d27458 https://access.redhat.com/security/cve/CVE-2024-26759 https://bugzilla.redhat.com/show_bug.cgi?id=2273204 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: 5.5EPSS: 0%CPEs: 2EXPL: 0CVE-2024-26758 – md: Don't ignore suspended array in md_check_recovery()
https://notcve.org/view.php?id=CVE-2024-26758
In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: md: No ignorar la matriz suspendida en md_check_recovery() mddev_suspend() nunca detiene sync_thread, por lo tanto, no tiene sentido ignorar la matriz suspendida en md_check_recovery(), lo que podría causar sync_thread no se puede cancelar el registro. Después de commit f52f5c71f3d4 ("md: arreglar la detención del hilo de sincronización"), el siguiente bloqueo se puede activar mediante test shell/integrity-caching.sh: 1) suspender la matriz: raid_postsuspend mddev_suspend 2) detener la matriz: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR , &mddev->recuperación); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., ! • https://git.kernel.org/stable/c/68866e425be2ef2664aa5c691bb3ab789736acf5 https://git.kernel.org/stable/c/a55f0d6179a19c6b982e2dc344d58c98647a3be0 https://git.kernel.org/stable/c/1baae052cccd08daf9a9d64c3f959d8cdb689757 • CWE-129: Improper Validation of Array Index •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-26757 – md: Don't ignore read-only array in md_check_recovery()
https://notcve.org/view.php?id=CVE-2024-26757
In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb 2) register new sync thread concurrently. 3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro 4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang; The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. • https://git.kernel.org/stable/c/ecbfb9f118bce49f571675929160e4ecef91cc8a https://git.kernel.org/stable/c/2ea169c5a0b1134d573d07fc27a16f327ad0e7d3 https://git.kernel.org/stable/c/55a48ad2db64737f7ffc0407634218cc6e4c513b •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2024-26756 – md: Don't register sync_thread for reshape directly
https://notcve.org/view.php?id=CVE-2024-26756
In the Linux kernel, the following vulnerability has been resolved: md: Don't register sync_thread for reshape directly Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared. Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: md: No registre sync_thread para remodelar directamente Actualmente, si se interrumpe el proceso de remodelación, volver a ensamblar la matriz registrará sync_thread directamente desde pers->run(), en este caso 'MD_RECOVERY_RUNNING ' se configura directamente, sin embargo, no hay garantía de que md_do_sync() se ejecute, por lo tanto, stop_sync_thread() se bloqueará porque 'MD_RECOVERY_RUNNING' no se puede borrar. En el último parche, asegúrese de que md_do_sync() establezca MD_RECOVERY_DONE; sin embargo, dm-raid test shell/lvconvert-raid-reshape.sh ocasionalmente puede activar el siguiente bloqueo: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [ dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/ 0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0 >] Entry_SYSCALL_64_after_hwframe+0x6c/0x74 Mientras tanto mddev->recovery es: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Solucione este problema eliminando el código para registrar sync_thread directamente desde raid10 y raid5. Y deje que md_check_recovery() registre sync_thread. • https://git.kernel.org/stable/c/f67055780caac6a99f43834795c43acf99eba6a6 https://git.kernel.org/stable/c/13b520fb62b772e408f9b79c5fe18ad414e90417 https://git.kernel.org/stable/c/ad39c08186f8a0f221337985036ba86731d6aafe •