Page 318 of 3754 results (0.014 seconds)

CVSS: -EPSS: 0%CPEs: 2EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: mm/mempolicy: no permitir MPOL_F_NUMA_BALANCING ilegal | MPOL_LOCAL en mbind() syzbot informó acceso a la memoria unificada en mbind() [1] El problema surgió con el commit bda420b98505 ("equilibrio numa: migrar en caso de falla entre múltiples nodos vinculados") Esta confirmación agregó un nuevo bit en MPOL_MODE_FLAGS, pero solo marcó que era válido combinación (MPOL_F_NUMA_BALANCING solo se puede usar con MPOL_BIND) en do_set_mempolicy() Este parche mueve la verificación en sanitize_mpol_flags() para que también sea usado por mbind() [1] ERROR: KMSAN: valor uninit en __mpol_equal+0x567/0x590 mm /mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [en línea] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/ mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [en línea] __do_sys_mbind mm/mempolicy.c:1490 [en línea] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c: 1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [en línea] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 Entry_SYSCALL_64_after_hwframe+0 Unidad x44/0xae fue creado en: slab_alloc_node mm/slub.c:3221 [en línea] slab_alloc mm/slub.c:3230 [en línea] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [en línea] do_mbind +0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [en línea] __do_sys_mbind mm/mempolicy.c:1490 [en línea] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0 x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [en línea] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 Entry_SYSCALL_64_after_hwframe+0x44/0xae ======= =============================================== Pánico del kernel - no sincronización: pánico_on_kmsan set... CPU: 0 PID: 15049 Comm: syz-executor.0 Contaminado: GB 5.15.0-rc2-syzkaller #0 Nombre del hardware: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/ Seguimiento de llamadas de 2011: __dump_stack lib/dump_stack.c:88 [en línea] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 pánico+0x44f/0xdeb kernel/panic.c: 232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h: 105 [en línea] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [en línea ] __do_sys_mbind mm/mempolicy.c:1490 [en línea] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common. c:51 [en línea ] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 Entry_SYSCALL_64_after_hwframe+0x44/0xae • https://git.kernel.org/stable/c/bda420b985054a3badafef23807c4b4fa38a3dff https://git.kernel.org/stable/c/9ee4e9ae98f1f262d6fae0d266cfdf3ba2c321d9 https://git.kernel.org/stable/c/6d2aec9e123bb9c49cb5c7fc654f25f81e688e8c •

CVSS: 7.0EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: userfaultfd: corrige una ejecución entre writeprotect y exit_mmap() Una ejecución es posible cuando un proceso sale, sus VMA son eliminados por exit_mmap() y al mismo tiempo se llama a userfaultfd_writeprotect() . KASAN detectó la ejecución en un núcleo de desarrollo, pero parece ser posible también en núcleos de vainilla. Utilice mmget_not_zero() para evitar la ejecución como se hace en otras operaciones de userfaultfd. A possible race condition flaw was found in the Linux kernel. • https://git.kernel.org/stable/c/63b2d4174c4ad1f40b48d7138e71bcb564c1fe03 https://git.kernel.org/stable/c/3cda4bfffd4f755645577aaa9e96a606657b4525 https://git.kernel.org/stable/c/149958ecd0627a9f1e9c678c25c665400054cd6a https://git.kernel.org/stable/c/cb185d5f1ebf900f4ae3bf84cee212e6dd035aca https://access.redhat.com/security/cve/CVE-2021-47461 https://bugzilla.redhat.com/show_bug.cgi?id=2282896 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] En el kernel de Linux, se resolvió la siguiente vulnerabilidad: ocfs2: corrige la corrupción de datos después de la conversión desde el formato en línea. el commit 6dbf7bb55598 ("fs: No invalide los buffers de página en block_write_full_page()") descubrió un error latente en la conversión de ocfs2 desde el inodo en línea. formato a un formato de inodo normal. El código en ocfs2_convert_inline_data_to_extents() intenta poner a cero todo el clúster asignado para datos de archivos capturando, poniendo a cero y ensuciando todas las páginas que cubren este clúster. • https://git.kernel.org/stable/c/acef5107e2eacb08a16ad5db60320d65bd26a6c0 https://git.kernel.org/stable/c/7ed80e77c908cbaa686529a49f8ae0060c5caee7 https://git.kernel.org/stable/c/7ce2b16bad2cbfa3fa7bbc42c4448914f639ca47 https://git.kernel.org/stable/c/f8a6a2ed4b7d1c3c8631eeb6d00572bc853094a8 https://git.kernel.org/stable/c/6dbf7bb555981fb5faf7b691e8f6169fc2b2e63b https://git.kernel.org/stable/c/36ed9e604215f58cec0381ca5fcc6da05f2d87ca https://git.kernel.org/stable/c/560edd14de2bf9dbc0129681eeb4d5ef87cc105f https://git.kernel.org/stable/c/8e6bfb4f70168ddfd32fb6dc028ad52fa •

CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: can: j1939: j1939_netdev_start(): arreglar UAF para rx_kref de j1939_priv Activará UAF para rx_kref de j1939_priv de la siguiente manera. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref , ...) REFCOUNT_WARN("adición en 0;...") ================================== ==================== refcount_t: suma en 0; use-after-free. ADVERTENCIA: CPU: 1 PID: 20874 en lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Seguimiento de llamadas: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426 /0xeb0 ? • https://git.kernel.org/stable/c/9d71dd0c70099914fcd063135da3c580865e924c https://git.kernel.org/stable/c/a0e47d2833b4f65e6c799f28c6b636d36b8b936d https://git.kernel.org/stable/c/864e77771a24c877aaf53aee019f78619cbcd668 https://git.kernel.org/stable/c/6e8811707e2df0c6ba920f0cad3a3bca7b42132f https://git.kernel.org/stable/c/d9d52a3ebd284882f5562c88e55991add5d01586 https://access.redhat.com/security/cve/CVE-2021-47459 https://bugzilla.redhat.com/show_bug.cgi?id=2282898 • CWE-416: Use After Free •

CVSS: -EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae En el kernel de Linux, se resolvió la siguiente vulnerabilidad: ocfs2: el montaje falla con desbordamiento del búfer en strlen. A partir del kernel 5.11 compilado con CONFIG_FORTIFY_SOURCE, la conexión de un sistema de archivos ocfs2 con una pila de clúster o2cb o pcmk falla con el siguiente seguimiento. • https://git.kernel.org/stable/c/ac011cb3ff7a76b3e0e6e77158ee4ba2f929e1fb https://git.kernel.org/stable/c/4b74ddcc22ee6455946e80a9c4808801f8f8561e https://git.kernel.org/stable/c/232ed9752510de4436468b653d145565669c8498 https://git.kernel.org/stable/c/7623b1035ca2d17bde0f6a086ad6844a34648df1 https://git.kernel.org/stable/c/d3a83576378b4c904f711598dde2c5e881c4295c https://git.kernel.org/stable/c/93be0eeea14cf39235e585c8f56df3b3859deaad https://git.kernel.org/stable/c/0e677ea5b7396f715a76b6b0ef441430e4c4b57f https://git.kernel.org/stable/c/b15fa9224e6e1239414525d8d556d8247 •