CVSS: 7.8EPSS: 0%CPEs: 184EXPL: 0CVE-2021-0245 – Junos OS: Junos Fusion: Hard-coded credentials on satellite devices allows a locally authenticated attacker to elevate their privileges.
https://notcve.org/view.php?id=CVE-2021-0245
A Use of Hard-coded Credentials vulnerability in Juniper Networks Junos OS on Junos Fusion satellite devices allows an attacker who is local to the device to elevate their privileges and take control of the device. This issue affects: Juniper Networks Junos OS Junos Fusion Satellite Devices. 16.1 versions prior to 16.1R7-S7; 17.1 versions prior to 17.1R2-S12, 17.1R3-S2; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10; 17.4 version 17.4R3 and later versions; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affected Junos OS releases prior to 16.1R1 or all 19.2R3 and 19.4R3 release versions. Una vulnerabilidad de Uso de Credenciales Embebidas en Juniper Networks Junos OS en dispositivos satelitales Junos Fusion, permite a un atacante que es local al dispositivo elevar sus privilegios y tomar el control del dispositivo. Este problema afecta a: Juniper Networks Junos OS Junos Fusion Satellite Devices versiones 16.1 anteriores a 16.1R7-S7; versiones 17.1 anteriores a 17.1R2-S12, 17.1R3-S2; versiones 17.2 anteriores a 17.2R3-S4; versiones 17.3 anteriores a 17.3R3-S8; versiones 17.4 anteriores a 17.4R2-S10; versiones 17.4, 17.4R3 y versiones posteriores; versiones 18.1 anteriores a 18.1R3-S10; versiones 18.2 anteriores a 18.2R2-S7, 18.2R3-S3; versiones 18.3 anteriores a 18.3R1-S7, 18.3R2-S4, 18.3R3-S2; versiones 18.4 anteriores a 18.4R1-S6, 18.4R2-S4, 18.4R3-S1;  versiones 19.1anteriores a 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versiones anteriores a 19.2R1-S4, 19.2R2; versiones 19.3 anteriores a 19.3R2-S5, 19.3R3; versiones 19. • https://kb.juniper.net/JSA11138 • CWE-798: Use of Hard-coded Credentials •
CVSS: 7.4EPSS: 0%CPEs: 268EXPL: 0CVE-2021-0244 – Junos OS: A race condition in the storm control profile may allow an attacker to cause a Denial of Service condition
https://notcve.org/view.php?id=CVE-2021-0244
A signal handler race condition exists in the Layer 2 Address Learning Daemon (L2ALD) of Juniper Networks Junos OS due to the absence of a specific protection mechanism to avoid a race condition which may allow an attacker to bypass the storm-control feature on devices. This issue is a corner case and only occurs during specific actions taken by an administrator of a device under certain specifics actions which triggers the event. The event occurs less frequently on devices which are not configured with Virtual Chassis configurations, and more frequently on devices configured in Virtual Chassis configurations. This issue is not specific to any particular Junos OS platform. An Indicator of Compromise (IoC) may be seen by reviewing log files for the following error message seen by executing the following show statement: show log messages | grep storm Result to look for: /kernel: GENCFG: op 58 (Storm Control Blob) failed; err 1 (Unknown) This issue affects: Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D49 on EX Series; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D191, 15.1X49-D200 on SRX Series; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11, 16.2R3; 17.1 versions prior to 17.1R2-S11, 17.1R3; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R2-S6, 18.2R3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2; 19.1 versions prior to 19.1R1-S4, 19.1R2. • https://kb.juniper.net/JSA11137 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: 4.7EPSS: 0%CPEs: 172EXPL: 0CVE-2021-0243 – Junos OS: EX4300: Stateless firewall policer fails to discard traffic
https://notcve.org/view.php?id=CVE-2021-0243
Improper Handling of Unexpected Data in the firewall policer of Juniper Networks Junos OS on EX4300 switches allows matching traffic to exceed set policer limits, possibly leading to a limited Denial of Service (DoS) condition. When the firewall policer discard action fails on a Layer 2 port, it will allow traffic to pass even though it exceeds set policer limits. Traffic will not get discarded, and will be forwarded even though a policer discard action is configured. When the issue occurs, traffic is not discarded as desired, which can be observed by comparing the Input bytes with the Output bytes using the following command: user@junos> monitor interface traffic Interface Link Input bytes (bps) Output bytes (bps) ge-0/0/0 Up 37425422 (82616) 37425354 (82616) <<<< egress ge-0/0/1 Up 37425898 (82616) 37425354 (82616) <<<< ingress The expected output, with input and output counters differing, is shown below: Interface Link Input bytes (bps) Output bytes (bps) ge-0/0/0 Up 342420570 (54600) 342422760 (54600) <<<< egress ge-0/0/1 Up 517672120 (84000) 342420570 (54600) <<<< ingress This issue only affects IPv4 policing. IPv6 traffic and firewall policing actions are not affected by this issue. • https://kb.juniper.net/JSA11136 • CWE-241: Improper Handling of Unexpected Data Type •
CVSS: 6.5EPSS: 0%CPEs: 181EXPL: 0CVE-2021-0242 – Junos OS: EX4300: FPC crash upon receipt of specific frames on an interface without L2PT or dot1x configured
https://notcve.org/view.php?id=CVE-2021-0242
A vulnerability due to the improper handling of direct memory access (DMA) buffers on EX4300 switches on Juniper Networks Junos OS allows an attacker sending specific unicast frames to trigger a Denial of Service (DoS) condition by exhausting DMA buffers, causing the FPC to crash and the device to restart. The DMA buffer leak is seen when receiving these specific, valid unicast frames on an interface without Layer 2 Protocol Tunneling (L2PT) or dot1x configured. Interfaces with either L2PT or dot1x configured are not vulnerable to this issue. When this issue occurs, DMA buffer usage keeps increasing and the following error log messages may be observed: Apr 14 14:29:34.360 /kernel: pid 64476 (pfex_junos), uid 0: exited on signal 11 (core dumped) Apr 14 14:29:33.790 init: pfe-manager (PID 64476) terminated by signal number 11. Core dumped! • https://kb.juniper.net/JSA11135 • CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CWE-241: Improper Handling of Unexpected Data Type CWE-770: Allocation of Resources Without Limits or Throttling •
CVSS: 7.4EPSS: 0%CPEs: 189EXPL: 0CVE-2021-0241 – Junos OS: Receipt of specific DHCPv6 packet may cause jdhcpd to crash and restart
https://notcve.org/view.php?id=CVE-2021-0241
On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a specific DHCPv6 packet is received, resulting in a restart of the daemon. The daemon automatically restarts without intervention, but continued receipt and processing of these specific packets will repeatedly crash the JDHCPD process and sustain the Denial of Service (DoS) condition. This issue only affects DHCPv6. DHCPv4 is not affected by this issue. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1, 19.3R3-S2; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. • https://kb.juniper.net/JSA11168 • CWE-703: Improper Check or Handling of Exceptional Conditions CWE-755: Improper Handling of Exceptional Conditions •