Page 326 of 2685 results (0.009 seconds)

CVSS: 4.7EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add Cortex-A520 speculative unprivileged load workaround Implement the workaround for ARM Cortex-A520 erratum 2966298. On an affected Cortex-A520 core, a speculatively executed unprivileged load might leak data from a privileged load via a cache side channel. The issue only exists for loads within a translation regime with the same translation (e.g. same ASID and VMID). Therefore, the issue only affects the return to EL0. The workaround is to execute a TLBI before returning to EL0 after all loads of privileged data. A non-shareable TLBI to any address is sufficient. The workaround isn't necessary if page table isolation (KPTI) is enabled, but for simplicity it will be. • https://git.kernel.org/stable/c/6e3ae2927b432a3b7c8374f14dbc1bd9ebe4372c https://git.kernel.org/stable/c/32b0a4ffcaea44a00a61e40c0d1bcc50362aee25 https://git.kernel.org/stable/c/471470bc7052d28ce125901877dd10e4c048e513 •

CVSS: 6.0EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU) races when it races with itself. hidpp_connect_event() primarily runs from a workqueue but it also runs on probe() and if a "device-connected" packet is received by the hw when the thread running hidpp_connect_event() from probe() is waiting on the hw, then a second thread running hidpp_connect_event() will be started from the workqueue. This opens the following races (note the below code is simplified): 1. Retrieving + printing the protocol (harmless race): if (!hidpp->protocol_major) { hidpp_root_get_protocol_version() hidpp->protocol_major = response.rap.params[0]; } We can actually see this race hit in the dmesg in the abrt output attached to rhbz#2227968: [ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. [ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. Testing with extra logging added has shown that after this the 2 threads take turn grabbing the hw access mutex (send_mutex) so they ping-pong through all the other TOCTOU cases managing to hit all of them: 2. Updating the name to the HIDPP name (harmless race): if (hidpp->name == hdev->name) { ... hidpp->name = new_name; } 3. Initializing the power_supply class for the battery (problematic!) • https://git.kernel.org/stable/c/ca0c4cc1d215dc22ab0e738c9f017c650f3183f5 https://git.kernel.org/stable/c/44481b244fcaa2b895a53081d6204c574720c38c https://git.kernel.org/stable/c/cd0e2bf7fb22fe9b989c59c42dca06367fd10e6b https://git.kernel.org/stable/c/093af62c023537f097d2ebdfaa0bc7c1a6e874e1 https://git.kernel.org/stable/c/28ddc1e0b898291323b62d770b1b931de131a528 https://git.kernel.org/stable/c/fd72ac9556a473fc7daf54efb6ca8a97180d621d https://git.kernel.org/stable/c/f7b2c7d9831af99369fe8ad9b2a68d78942f414e https://git.kernel.org/stable/c/dac501397b9d81e4782232c39f94f4307 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •

CVSS: 4.4EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. • https://git.kernel.org/stable/c/c64e4dca9aefd232b17ac4c779b608b286654e81 https://git.kernel.org/stable/c/8e7346bfea56453e31b7421c1c17ca2fb9ed613d https://git.kernel.org/stable/c/6ad3e9fd3632106696692232bf7ff88b9f7e1bc3 https://git.kernel.org/stable/c/241f230324337ed5eae3846a554fb6d15169872c https://git.kernel.org/stable/c/528f0ba9f7a4bc1b61c9b6eb591ff97ca37cac6b https://git.kernel.org/stable/c/fb9895ab9533534335fa83d70344b397ac862c81 https://git.kernel.org/stable/c/136f69a04e71ba3458d137aec3bb2ce1232c0289 https://git.kernel.org/stable/c/f74a7afc224acd5e922c7a2e52244d891 • CWE-476: NULL Pointer Dereference •

CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: perf/x86/lbr: Filtrar direcciones vsyscall Descubrimos que puede ocurrir un pánico cuando se realiza una vsyscall mientras el muestreo LBR está activo. • https://git.kernel.org/stable/c/403d201d1fd144cb249836dafb222f6375871c6c https://git.kernel.org/stable/c/3863989497652488a50f00e96de4331e5efabc6c https://git.kernel.org/stable/c/f71edacbd4f99c0e12fe4a4007ab4d687d0688db https://git.kernel.org/stable/c/e53899771a02f798d436655efbd9d4b46c0f9265 https://access.redhat.com/security/cve/CVE-2023-52476 https://bugzilla.redhat.com/show_bug.cgi?id=2267041 • CWE-404: Improper Resource Shutdown or Release •

CVSS: 6.1EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e En el kernel de Linux, se resolvió la siguiente vulnerabilidad: Entrada: powermate - corrige el use-after-free en powermate_config_complete syzbot ha encontrado un error de use-after-free [1] en el controlador powermate. Esto sucede cuando el dispositivo está desconectado, lo que genera una memoria libre de la estructura powermate_device. • https://git.kernel.org/stable/c/8677575c4f39d65bf0d719b5d20e8042e550ccb9 https://git.kernel.org/stable/c/67cace72606baf1758fd60feb358f4c6be92e1cc https://git.kernel.org/stable/c/5aa514100aaf59868d745196258269a16737c7bd https://git.kernel.org/stable/c/cd2fbfd8b922b7fdd50732e47d797754ab59cb06 https://git.kernel.org/stable/c/6a4a396386404e62fb59bc3bde48871a64a82b4f https://git.kernel.org/stable/c/2efe67c581a2a6122b328d4bb6f21b3f36f40d46 https://git.kernel.org/stable/c/e528b1b9d60743e0b26224e3fe7aa74c24b8b2f8 https://git.kernel.org/stable/c/5c15c60e7be615f05a45cd905093a54b1 • CWE-416: Use After Free •