Page 334 of 2792 results (0.019 seconds)

CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: sched/membarrier: reduce the ability to hammer on sys_membarrier On some systems, sys_membarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: sched/membarrier: reduce la capacidad de martillar en sys_membarrier. En algunos sistemas, sys_membarrier puede ser muy costoso, provocando ralentizaciones generales en todo. Por lo tanto, bloquee la ruta para serializar los accesos y evitar que se llame a una frecuencia demasiado alta y sature la máquina. • https://git.kernel.org/stable/c/22e4ebb975822833b083533035233d128b30e98f https://git.kernel.org/stable/c/3cd139875e9a7688b3fc715264032620812a5fa3 https://git.kernel.org/stable/c/2441a64070b85c14eecc3728cc87e883f953f265 https://git.kernel.org/stable/c/db896bbe4a9c67cee377e5f6a743350d3ae4acf6 https://git.kernel.org/stable/c/50fb4e17df319bb33be6f14e2a856950c1577dee https://git.kernel.org/stable/c/24ec7504a08a67247fbe798d1de995208a8c128a https://git.kernel.org/stable/c/b6a2a9cbb67545c825ec95f06adb7ff300a2ad71 https://git.kernel.org/stable/c/c5b2063c65d05e79fad8029324581d86c •

CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: phy: ti: phy-omap-usb2: corrige la desreferencia del puntero NULL para SRP. • https://git.kernel.org/stable/c/657b306a7bdfca4ae1514b533a0e7c3c6d26dbc6 https://git.kernel.org/stable/c/486218c11e8d1c8f515a3bdd70d62203609d4b6b https://git.kernel.org/stable/c/8398d8d735ee93a04fb9e9f490e8cacd737e3bf5 https://git.kernel.org/stable/c/be3b82e4871ba00e9b5d0ede92d396d579d7b3b3 https://git.kernel.org/stable/c/8cc889b9dea0579726be9520fcc766077890b462 https://git.kernel.org/stable/c/0430bfcd46657d9116a26cd377f112cbc40826a4 https://git.kernel.org/stable/c/14ef61594a5a286ae0d493b8acbf9eac46fd04c4 https://git.kernel.org/stable/c/396e17af6761b3cc9e6e4ca94b4de7f64 • CWE-476: NULL Pointer Dereference •

CVSS: 7.8EPSS: 0%CPEs: 7EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: KVM: arm64: vgic-its: Evite posibles UAF en la caché de traducción LPI. Existe un escenario potencial de UAF en el caso de que un caché de traducción LPI se acelere con una operación que invalide la caché, como un comando DISCARD ITS. La raíz del problema es que vgic_its_check_cache() no eleva el refcount en vgic_irq antes de eliminar el bloqueo que serializa los cambios de refcount. • https://git.kernel.org/stable/c/d04acadb6490aa3314f9c9e087691e55de153b88 https://git.kernel.org/stable/c/ba7be666740847d967822bed15500656b26bc703 https://git.kernel.org/stable/c/12c2759ab1343c124ed46ba48f27bd1ef5d2dff4 https://git.kernel.org/stable/c/dba788e25f05209adf2b0175eb1691dc89fb1ba6 https://git.kernel.org/stable/c/65b201bf3e9af1b0254243a5881390eda56f72d1 https://git.kernel.org/stable/c/dd3956a1b3dd11f46488c928cb890d6937d1ca80 https://git.kernel.org/stable/c/ad362fe07fecf0aba839ff2cc59a3617bd42c33f https://lists.debian.org/debian-lts-announce/2024/06/ • CWE-416: Use After Free •

CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b En el kernel de Linux, se resolvió la siguiente vulnerabilidad: mlxsw: espectro_acl_tcam: corrige la desreferencia del puntero NULL en la ruta de error Al llamar a mlxsw_sp_acl_tcam_region_destroy() desde una ruta de error después de no poder adjuntar la región a un grupo de ACL, alcanzamos una desreferencia del puntero NULL al 'región->grupo->tcam' [1]. Solucione recuperando el puntero 'tcam' usando mlxsw_sp_acl_to_tcam(). [1] ERROR: desreferencia del puntero NULL del kernel, dirección: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Seguimiento de llamadas: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0 x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b 0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 Entry_SYSCALL_64_after_hwframe+0x63/0x6b A flaw was found in the Linux kernel, where a faulty error handler in the driver for certain Mellanox hardware could lead to a null pointer reference. This issue affects system stability. • https://git.kernel.org/stable/c/22a677661f5624539d394f681276171f92d714df https://git.kernel.org/stable/c/75fa2d8b3c0175b519c99ace54ab8474cfd0077e https://git.kernel.org/stable/c/817840d125a370626895df269c50c923b79b0a39 https://git.kernel.org/stable/c/d0a1efe417c97a1e9b914056ee6b86f1ef75fe1f https://git.kernel.org/stable/c/efeb7dfea8ee10cdec11b6b6ba4e405edbe75809 https://access.redhat.com/security/cve/CVE-2024-26595 https://bugzilla.redhat.com/show_bug.cgi?id=2265799 • CWE-476: NULL Pointer Dereference •

CVSS: 7.8EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: EDAC/thunderx: corrige un posible acceso a cadenas fuera de los límites Al habilitar -Wstringop-overflow globalmente se expone una advertencia para un error común en el uso de strncat(): drivers/edac/ thunderx_edac.c: En la función 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' el límite especificado 1024 es igual al tamaño de destino [-Werror=stringop-overflow=] 1136 | strncat(msj, otro, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msj, otro, OCX_MESSAGE_SIZE); ... 1150 | strncat(msj, otro, OCX_MESSAGE_SIZE); ... Aparentemente, el autor de este controlador esperaba que strncat() se comportara de la manera que lo hace strlcat(), que utiliza el tamaño del búfer de destino como tercer argumento en lugar de la longitud del búfer de origen. El resultado es que no se comprueba el tamaño del búfer asignado. Cámbielo a strlcat(). • https://git.kernel.org/stable/c/41003396f932d7f027725c7acebb6a7caa41dc3e https://git.kernel.org/stable/c/71c17ee02538802ceafc830f0736aa35b564e601 https://git.kernel.org/stable/c/5da3b6e7196f0b4f3728e4e25eb20233a9ddfaf6 https://git.kernel.org/stable/c/6aa7865ba7ff7f0ede0035180fb3b9400ceb405a https://git.kernel.org/stable/c/700cf4bead80fac994dcc43ae1ca5d86d8959b21 https://git.kernel.org/stable/c/9dbac9fdae6e3b411fc4c3fca3bf48f70609c398 https://git.kernel.org/stable/c/e1c86511241588efffaa49556196f09a498d5057 https://git.kernel.org/stable/c/426fae93c01dffa379225eb2bd4d3cdc4 • CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CWE-805: Buffer Access with Incorrect Length Value •