CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26813 – vfio/platform: Create persistent IRQ handlers
https://notcve.org/view.php?id=CVE-2024-26813
In the Linux kernel, the following vulnerability has been resolved: vfio/platform: Create persistent IRQ handlers The vfio-platform SET_IRQS ioctl currently allows loopback triggering of an interrupt before a signaling eventfd has been configured by the user, which thereby allows a NULL pointer dereference. Rather than register the IRQ relative to a valid trigger, register all IRQs in a disabled state in the device open path. This allows mask operations on the IRQ to nest within the overall enable state governed by a valid eventfd signal. This decouples @masked, protected by the @locked spinlock from @trigger, protected via the @igate mutex. In doing so, it's guaranteed that changes to @trigger cannot race the IRQ handlers because the IRQ handler is synchronously disabled before modifying the trigger, and loopback triggering of the IRQ via ioctl is safe due to serialization with trigger changes via igate. For compatibility, request_irq() failures are maintained to be local to the SET_IRQS ioctl rather than a fatal error in the open device path. This allows, for example, a userspace driver with polling mode support to continue to work regardless of moving the request_irq() call site. This necessarily blocks all SET_IRQS access to the failed index. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: vfio/plataforma: cree controladores IRQ persistentes. La plataforma vfio SET_IRQS ioctl actualmente permite la activación de bucle invertido de una interrupción antes de que el usuario haya configurado un evento de señalización, lo que permite un puntero NULL. desreferencia. • https://git.kernel.org/stable/c/57f972e2b341dd6a73533f9293ec55d584a5d833 https://git.kernel.org/stable/c/07afdfd8a68f9eea8db0ddc4626c874f29d2ac5e https://git.kernel.org/stable/c/09452c8fcbd7817c06e8e3212d99b45917e603a5 https://git.kernel.org/stable/c/cc5838f19d39a5fef04c468199699d2a4578be3a https://git.kernel.org/stable/c/7932db06c82c5b2f42a4d1a849d97dba9ce4a362 https://git.kernel.org/stable/c/62d4e43a569b67929eb3319780be5359694c8086 https://git.kernel.org/stable/c/d6bedd6acc0bcb1e7e010bc046032e47f08d379f https://git.kernel.org/stable/c/0f8d8f9c2173a541812dd750529f4a415 •
CVSS: 4.1EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26812 – vfio/pci: Create persistent INTx handler
https://notcve.org/view.php?id=CVE-2024-26812
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: vfio/pci: crear un controlador INTx persistente Existe una vulnerabilidad donde se puede desconfigurar el eventfd para la señalización INTx, lo que anula el registro del controlador IRQ pero aún permite que los eventfds se señalen con un contexto NULL a través de el SET_IRQS ioctl o mediante unmask irqfd si la interrupción del dispositivo está pendiente. • https://git.kernel.org/stable/c/89e1f7d4c66d85f42c3d52ea3866eb10cadf6153 https://git.kernel.org/stable/c/b18fa894d615c8527e15d96b76c7448800e13899 https://git.kernel.org/stable/c/27d40bf72dd9a6600b76ad05859176ea9a1b4897 https://git.kernel.org/stable/c/4cb0d7532126d23145329826c38054b4e9a05e7c https://git.kernel.org/stable/c/7d29d4c72c1e196cce6969c98072a272d1a703b3 https://git.kernel.org/stable/c/69276a555c740acfbff13fb5769ee9c92e1c828e https://git.kernel.org/stable/c/4c089cefe30924fbe20dd1ee92774ea1f5eca834 https://git.kernel.org/stable/c/0e09cf81959d9f12b75ad5c6dd53d2374 • CWE-476: NULL Pointer Dereference •
CVSS: 4.4EPSS: 0%CPEs: 8EXPL: 0CVE-2024-26810 – vfio/pci: Lock external INTx masking ops
https://notcve.org/view.php?id=CVE-2024-26810
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Lock external INTx masking ops Mask operations through config space changes to DisINTx may race INTx configuration changes via ioctl. Create wrappers that add locking for paths outside of the core interrupt code. In particular, irq_type is updated holding igate, therefore testing is_intx() requires holding igate. For example clearing DisINTx from config space can otherwise race changes of the interrupt configuration. This aligns interfaces which may trigger the INTx eventfd into two camps, one side serialized by igate and the other only enabled while INTx is configured. A subsequent patch introduces synchronization for the latter flows. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: vfio/pci: bloquear operaciones de enmascaramiento INTx externas Las operaciones de enmascaramiento a través de cambios en el espacio de configuración a DisINTx pueden acelerar los cambios de configuración de INTx a través de ioctl. • https://git.kernel.org/stable/c/89e1f7d4c66d85f42c3d52ea3866eb10cadf6153 https://git.kernel.org/stable/c/1e71b6449d55179170efc8dee8664510bb813b42 https://git.kernel.org/stable/c/3dd9be6cb55e0f47544e7cdda486413f7134e3b3 https://git.kernel.org/stable/c/ec73e079729258a05452356cf6d098bf1504d5a6 https://git.kernel.org/stable/c/3fe0ac10bd117df847c93408a9d428a453cd60e5 https://git.kernel.org/stable/c/04a4a017b9ffd7b0f427b8c376688d14cb614651 https://git.kernel.org/stable/c/6fe478d855b20ac1eb5da724afe16af5a2aaaa40 https://git.kernel.org/stable/c/03505e3344b0576fd619416793a31eae9 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: -EPSS: 0%CPEs: 10EXPL: 0CVE-2024-26807 – spi: cadence-qspi: fix pointer reference in runtime PM hooks
https://notcve.org/view.php?id=CVE-2024-26807
In the Linux kernel, the following vulnerability has been resolved: Both cadence-quadspi ->runtime_suspend() and ->runtime_resume() implementations start with: struct cqspi_st *cqspi = dev_get_drvdata(dev); struct spi_controller *host = dev_get_drvdata(dev); This obviously cannot be correct, unless "struct cqspi_st" is the first member of " struct spi_controller", or the other way around, but it is not the case. "struct spi_controller" is allocated by devm_spi_alloc_host(), which allocates an extra amount of memory for private data, used to store "struct cqspi_st". The ->probe() function of the cadence-quadspi driver then sets the device drvdata to store the address of the "struct cqspi_st" structure. Therefore: struct cqspi_st *cqspi = dev_get_drvdata(dev); is correct, but: struct spi_controller *host = dev_get_drvdata(dev); is not, as it makes "host" point not to a "struct spi_controller" but to the same "struct cqspi_st" structure as above. This obviously leads to bad things (memory corruption, kernel crashes) directly during ->probe(), as ->probe() enables the device using PM runtime, leading the ->runtime_resume() hook being called, which in turns calls spi_controller_resume() with the wrong pointer. This has at least been reported [0] to cause a kernel crash, but the exact behavior will depend on the memory contents. [0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/ This issue potentially affects all platforms that are currently using the cadence-quadspi driver. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: spi: cadence-qspi: corrige la referencia del puntero en los ganchos PM en tiempo de ejecución dev_get_drvdata() se utiliza para adquirir el puntero a cqspi y el controlador SPI. Ninguno de los dos integra al otro; Esto conduce a la corrupción de la memoria. • https://git.kernel.org/stable/c/2087e85bb66ee3652dafe732bb9b9b896229eafc https://git.kernel.org/stable/c/e3f9fc9a4f1499cc9e1bad4482d377494e367b3d https://git.kernel.org/stable/c/6716203844bc8489af5e5564f0fa31e0c094a7ff https://git.kernel.org/stable/c/b24f1ecc8fe2ceefc14af02edb1744c246d87bf7 https://git.kernel.org/stable/c/d453f25faf681799d636fe9d6899ad91c45aa11e https://git.kernel.org/stable/c/79acf7fb856eade9c3d0cf00fd34a04bf5c43a1c https://git.kernel.org/stable/c/18cb554e9da81bc4eca653c17a0d65e8b5835c09 https://git.kernel.org/stable/c/1368dbc0a432acf9fc0dcb23bfe52d32c •
CVSS: -EPSS: 0%CPEs: 13EXPL: 0CVE-2024-26805 – netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter
https://notcve.org/view.php?id=CVE-2024-26805
In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter syzbot reported the following uninit-value access issue [1]: netlink_to_full_skb() creates a new `skb` and puts the `skb->data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data(). This `len` is based on `skb->end` that is not data offset but buffer offset. The `skb->end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb->end` to `skb->len`, which is the actual data offset. BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] sock_read_iter+0x467/0x580 net/socket.c:1136 call_read_iter include/linux/fs.h:2014 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x8f6/0xe00 fs/read_write.c:470 ksys_read+0x20f/0x4c0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x93/0xd0 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was stored to memory at: skb_put_data include/linux/skbuff.h:2622 [inline] netlink_to_full_skb net/netlink/af_netlink.c:181 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline] __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline] netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline] netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: free_pages_prepare mm/page_alloc.c:1087 [inline] free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533 release_pages+0x23d3/0x2410 mm/swap.c:1042 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316 tlb_batch_pages ---truncated--- En el kernel de Linux, se resolvió la siguiente vulnerabilidad: netlink: Fix kernel-infoleak-after-free en __skb_datagram_iter syzbot informó el siguiente problema de acceso al valor uninit [1]: netlink_to_full_skb() crea un nuevo `skb` y coloca el ` skb->data` pasó como primer argumento de netlink_to_full_skb() al nuevo `skb`. • https://git.kernel.org/stable/c/1853c949646005b5959c483becde86608f548f24 https://git.kernel.org/stable/c/92994a5f49d0a81c8643452d5c0a6e8b31d85a61 https://git.kernel.org/stable/c/85aec6328f3346b0718211faad564a3ffa64f60e https://git.kernel.org/stable/c/d38200098e3203ba30ba06ed3f345ec6ca75234c https://git.kernel.org/stable/c/65d48c630ff80a19c39751a4a6d3315f4c3c0280 https://git.kernel.org/stable/c/62f43b58d2b2c4f0200b9ca2b997f4c484f0272f https://git.kernel.org/stable/c/ec343a55b687a452f5e87f3b52bf9f155864df65 https://git.kernel.org/stable/c/9ae51361da43270f4ba0eb924427a07e8 •