CVSS: 7.4EPSS: 0%CPEs: 192EXPL: 0CVE-2021-0240 – Junos OS: Receipt of malformed DHCPv6 packets causes jdhcpd to crash and restart.
https://notcve.org/view.php?id=CVE-2021-0240
On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, the Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash if a malformed DHCPv6 packet is received, resulting in a restart of the daemon. The daemon automatically restarts without intervention, but continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects DHCPv6. DHCPv4 is not affected by this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R2. • https://kb.juniper.net/JSA11168 • CWE-703: Improper Check or Handling of Exceptional Conditions CWE-755: Improper Handling of Exceptional Conditions •
CVSS: 5.5EPSS: 0%CPEs: 147EXPL: 0CVE-2021-0238 – Junos OS: MX Series: Executing CLI command repetitively may cause the system to run out of disk space
https://notcve.org/view.php?id=CVE-2021-0238
When a MX Series is configured as a Broadband Network Gateway (BNG) based on Layer 2 Tunneling Protocol (L2TP), executing certain CLI command may cause the system to run out of disk space, excessive disk usage may cause other complications. An administrator can use the following CLI command to monitor the available disk space: user@device> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/gpt/junos 19G 18G 147M 99% /.mount <<<<< running out of space tmpfs 21G 16K 21G 0% /.mount/tmp tmpfs 5.3G 1.7M 5.3G 0% /.mount/mfs This issue affects Juniper Networks Junos OS on MX Series: 17.3R1 and later versions prior to 17.4R3-S5, 18.1 versions prior to 18.1R3-S13, 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 17.3R1. Cuando una Serie MX se configura como Broadband Network Gateway (BNG) basada en el protocolo Layer 2 Tunneling Protocol (L2TP), la ejecución de determinados comandos de la CLI puede hacer que el sistema se quede sin espacio en el disco, el uso excesivo del disco puede causar otras complicaciones. Un administrador puede usar el siguiente comando CLI para monitorear el espacio disponible en disco: user@device> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/gpt/junos 19G 18G 147M 99% /.mount <<<<< running out of space tmpfs 21G 16K 21G 0% /.mount/tmp tmpfs 5.3G 1.7M 5.3G 0% /.mount/mfs. Este problema afecta a Juniper Networks Junos OS en la serie MX: 17.3R1 y posteriores, versiones anteriores a 17.4R3-S5, versiones 18.1 anteriores a 18.1R3-S13, versiones 18.2 anteriores a 18.2R3-S7; versiones 18.3 anteriores a 18.3R3-S4; versiones 18.4 anteriores a 18.4R3-S7; versiones 19.1 anteriores a 19.1R3-S4; 19. • https://kb.juniper.net/JSA11133 • CWE-400: Uncontrolled Resource Consumption •
CVSS: 6.5EPSS: 0%CPEs: 226EXPL: 0CVE-2021-0237 – Junos OS: EX4300-MP/EX4600/EX4650/QFX5K Series: Packet Forwarding Engine manager (FXPC) process crashes when deployed in a Virtual Chassis (VC) configuration
https://notcve.org/view.php?id=CVE-2021-0237
On Juniper Networks EX4300-MP Series, EX4600 Series, EX4650 Series, QFX5K Series deployed as a Virtual Chassis with a specific Layer 2 circuit configuration, Packet Forwarding Engine manager (FXPC) process may crash and restart upon receipt of specific layer 2 frames. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series, EX4650 Series, QFX5K Series 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4, 17.4R3-S5; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2; En Juniper Networks Serie EX4300-MP, Serie EX4600, Serie EX4650, Serie QFX5K implementadas como un Virtual Chassis con una configuración de circuito de capa 2 específica, el proceso del Packet Forwarding Engine manager (FXPC) puede bloquearse y reiniciarse al recibir tramas de capa 2 específicas. La recepción y el procesamiento continuo de este paquete crearán una condición sostenida de Denegación de Servicio (DoS). Este problema afecta a: Juniper Networks Junos OS en las versiones Serie EX4300-MP, Serie EX4600, Serie EX4650, Serie QFX5K versiones 15.1 anteriores a 15.1R7-S9; versiones 17.3 anteriores a 17.3R3-S11; versiones 17.4 anteriores a 17.4R2-S13, 17.4R3-S4, 17.4R3-S5; versiones 18.2 anteriores a 18.2R3-S8; versiones 18.3 anteriores a 18.3R3-S4; versiones 18.4 anteriores a 18.4R2-S7, 18.4R3-S6; versiones 19.1 anteriores a 19.1R3-S4; versiones 19.2 anteriores a 19.2R1-S6, 19.2R3-S1; versiones 19.3 anteriores a 19.3R3-S1; versiones 19.4 anteriores a 19.4R2-S4, 19.4R3-S1; versiones 20.1 anteriores a 20.1R2; versiones 20.2 anteriores a 20.2R2, 20.2R3; versiones 20.3 anteriores a 20.3R1-S2, 20.3R2; • https://kb.juniper.net/JSA11132 •
CVSS: 7.3EPSS: 0%CPEs: 96EXPL: 0CVE-2021-0235 – Junos OS: SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3, vSRX Series: In a multi-tenant environment, a tenant host administrator may configure logical firewall isolation affecting other tenant networks
https://notcve.org/view.php?id=CVE-2021-0235
On SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3, vSRX Series devices using tenant services on Juniper Networks Junos OS, due to incorrect permission scheme assigned to tenant system administrators, a tenant system administrator may inadvertently send their network traffic to one or more tenants while concurrently modifying the overall device system traffic management, affecting all tenants and the service provider. Further, a tenant may inadvertently receive traffic from another tenant. This issue affects: Juniper Networks Junos OS 18.3 version 18.3R1 and later versions on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2; 18.4 version 18.4R1 and later versions on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3; 19.1 versions 19.1R1 and later versions on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3; 19.3 versions prior to 19.3R3-S2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3; 20.1 versions prior to 20.1R2, 20.1R3 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3 vSRX Series; 20.2 versions prior to 20.2R2-S1, 20.2R3 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3 vSRX Series; 20.3 versions prior to 20.3R1-S2, 20.3R2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3 vSRX Series; 20.4 versions prior to 20.4R1, 20.4R2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3 vSRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 18.3R1. En las Series SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 con dispositivos de las Series SPC2/SPC3, vSRX, que utilizan servicios de inquilino en Juniper Networks Junos OS, debido a un esquema de permisos incorrecto asignado a los administradores del sistema inquilino, un administrador del sistema inquilino puede enviar inadvertidamente su tráfico de red a uno o más inquilinos al mismo tiempo que se modifica la gestión general del tráfico del sistema del dispositivo, lo que afecta a todos los inquilinos y al proveedor de servicios. • https://kb.juniper.net/JSA11130 • CWE-276: Incorrect Default Permissions •
CVSS: 5.8EPSS: 0%CPEs: 144EXPL: 0CVE-2021-0234 – Junos OS: QFX5100-96S: DDoS protection does not work as expected.
https://notcve.org/view.php?id=CVE-2021-0234
Due to an improper Initialization vulnerability on Juniper Networks Junos OS QFX5100-96S devices with QFX 5e Series image installed, ddos-protection configuration changes will not take effect beyond the default DDoS (Distributed Denial of Service) settings when configured from the CLI. The DDoS protection (jddosd) daemon allows the device to continue to function while protecting the packet forwarding engine (PFE) during the DDoS attack. When this issue occurs, the default DDoS settings within the PFE apply, as CPU bound packets will be throttled and dropped in the PFE when the limits are exceeded. To check if the device has this issue, the administrator can execute the following command to monitor the status of DDoS protection: user@device> show ddos-protection protocols error: the ddos-protection subsystem is not running This issue affects only QFX5100-96S devices. No other products or platforms are affected by this issue. • https://kb.juniper.net/JSA11129 • CWE-665: Improper Initialization •