Page 365 of 4445 results (0.018 seconds)

CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b En el kernel de Linux, se resolvió la siguiente vulnerabilidad: mlxsw: espectro_acl_tcam: corrige la desreferencia del puntero NULL en la ruta de error Al llamar a mlxsw_sp_acl_tcam_region_destroy() desde una ruta de error después de no poder adjuntar la región a un grupo de ACL, alcanzamos una desreferencia del puntero NULL al 'región->grupo->tcam' [1]. Solucione recuperando el puntero 'tcam' usando mlxsw_sp_acl_to_tcam(). [1] ERROR: desreferencia del puntero NULL del kernel, dirección: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Seguimiento de llamadas: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0 x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b 0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 Entry_SYSCALL_64_after_hwframe+0x63/0x6b A flaw was found in the Linux kernel, where a faulty error handler in the driver for certain Mellanox hardware could lead to a null pointer reference. This issue affects system stability. • https://git.kernel.org/stable/c/22a677661f5624539d394f681276171f92d714df https://git.kernel.org/stable/c/817840d125a370626895df269c50c923b79b0a39 https://git.kernel.org/stable/c/d0a1efe417c97a1e9b914056ee6b86f1ef75fe1f https://git.kernel.org/stable/c/efeb7dfea8ee10cdec11b6b6ba4e405edbe75809 https://access.redhat.com/security/cve/CVE-2024-26595 https://bugzilla.redhat.com/show_bug.cgi?id=2265799 • CWE-476: NULL Pointer Dereference •

CVSS: 7.8EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: EDAC/thunderx: corrige un posible acceso a cadenas fuera de los límites Al habilitar -Wstringop-overflow globalmente se expone una advertencia para un error común en el uso de strncat(): drivers/edac/ thunderx_edac.c: En la función 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' el límite especificado 1024 es igual al tamaño de destino [-Werror=stringop-overflow=] 1136 | strncat(msj, otro, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msj, otro, OCX_MESSAGE_SIZE); ... 1150 | strncat(msj, otro, OCX_MESSAGE_SIZE); ... Aparentemente, el autor de este controlador esperaba que strncat() se comportara de la manera que lo hace strlcat(), que utiliza el tamaño del búfer de destino como tercer argumento en lugar de la longitud del búfer de origen. El resultado es que no se comprueba el tamaño del búfer asignado. Cámbielo a strlcat(). • https://git.kernel.org/stable/c/41003396f932d7f027725c7acebb6a7caa41dc3e https://git.kernel.org/stable/c/71c17ee02538802ceafc830f0736aa35b564e601 https://git.kernel.org/stable/c/5da3b6e7196f0b4f3728e4e25eb20233a9ddfaf6 https://git.kernel.org/stable/c/6aa7865ba7ff7f0ede0035180fb3b9400ceb405a https://git.kernel.org/stable/c/700cf4bead80fac994dcc43ae1ca5d86d8959b21 https://git.kernel.org/stable/c/9dbac9fdae6e3b411fc4c3fca3bf48f70609c398 https://git.kernel.org/stable/c/e1c86511241588efffaa49556196f09a498d5057 https://git.kernel.org/stable/c/426fae93c01dffa379225eb2bd4d3cdc4 • CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CWE-805: Buffer Access with Incorrect Length Value •

CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: bloque: agregar verifique que la longitud de la partición debe estar alineada con el tamaño del bloque Antes de llamar a agregar partición o cambiar el tamaño de la partición, no se verifica si la longitud está alineada con el tamaño del bloque lógico. Si el tamaño del bloque lógico del disco es mayor que 512 bytes, entonces el tamaño de la partición tal vez no sea el múltiplo del tamaño del bloque lógico, y cuando se lea el último sector, bio_truncate() ajustará el tamaño de la biografía, lo que resultará en un error de E/S si el tamaño del comando de lectura es menor que el tamaño del bloque lógico. Si se admiten datos de integridad, esto también resultará en una desreferencia del puntero nulo al llamar a bio_integrity_free. A flaw was found in the Linux kernel's block subsystem, where a NULL pointer dereference occurs if partitions are created or resized with a size that is not a multiple of the logical block size. • https://git.kernel.org/stable/c/8f6dfa1f1efe6dcca2d43e575491d8fcbe922f62 https://git.kernel.org/stable/c/5010c27120962c85d2f421d2cf211791c9603503 https://git.kernel.org/stable/c/ef31cc87794731ffcb578a195a2c47d744e25fb8 https://git.kernel.org/stable/c/cb16cc1abda18a9514106d2ac8c8d7abc0be5ed8 https://git.kernel.org/stable/c/bcdc288e7bc008daf38ef0401b53e4a8bb61bbe5 https://git.kernel.org/stable/c/6f64f866aa1ae6975c95d805ed51d7e9433a0016 https://lists.debian.org/debian-lts-announce/2024/06/msg00017.html https://access.redhat.com/security/cve/CVE-2023 • CWE-476: NULL Pointer Dereference •

CVSS: 7.8EPSS: 0%CPEs: 8EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: serial: 8250: omap: no omita la liberación de recursos si pm_runtime_resume_and_get() falla. • https://git.kernel.org/stable/c/2d66412563ef8953e2bac2d98d2d832b3f3f49cd https://git.kernel.org/stable/c/d833cba201adf9237168e19f0d76e4d7aa69f303 https://git.kernel.org/stable/c/e0db709a58bdeb8966890882261a3f8438c5c9b7 https://git.kernel.org/stable/c/e3f0c638f428fd66b5871154b62706772045f91a https://git.kernel.org/stable/c/02eed6390dbe61115f3e3f63829c95c611aee67b https://git.kernel.org/stable/c/b502fb43f7fb55aaf07f6092ab44657595214b93 https://git.kernel.org/stable/c/bc57f3ef8a9eb0180606696f586a6dcfaa175ed0 https://git.kernel.org/stable/c/828cd829483f0cda920710997aed79130 • CWE-416: Use After Free •

CVSS: 5.5EPSS: 0%CPEs: 7EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn't coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq(). En el kernel de Linux, se resolvió la siguiente vulnerabilidad: nvmet-tcp: soluciona un pánico del kernel cuando el host envía una longitud de PDU H2C no válida. Si el host envía un comando H2CData con un DATAL no válido, el kernel puede fallar en nvmet_tcp_build_pdu_iovec(). No se puede manejar la desreferencia del puntero NULL del kernel en la dirección virtual 0000000000000000 lr: nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Rastreo de llamadas: Process_one_work+0x174/0x3c8 trabajador_thread+0x2d0/0x3e8 kthread+0x104/0x110 Solucione el error generando un error fatal si DATAL es No es coherente con el tamaño del paquete. Además, la longitud de la PDU nunca debe exceder el parámetro MAXH2CDATA que se ha comunicado al host en nvmet_tcp_handle_icreq(). • https://git.kernel.org/stable/c/872d26a391da92ed8f0c0f5cb5fef428067b7f30 https://git.kernel.org/stable/c/ee5e7632e981673f42a50ade25e71e612e543d9d https://git.kernel.org/stable/c/f775f2621c2ac5cc3a0b3a64665dad4fb146e510 https://git.kernel.org/stable/c/4cb3cf7177ae3666be7fb27d4ad4d72a295fb02d https://git.kernel.org/stable/c/2871aa407007f6f531fae181ad252486e022df42 https://git.kernel.org/stable/c/24e05760186dc070d3db190ca61efdbce23afc88 https://git.kernel.org/stable/c/70154e8d015c9b4fb56c1a2ef1fc8b83d45c7f68 https://git.kernel.org/stable/c/efa56305908ba20de2104f1b8508c6a74 • CWE-476: NULL Pointer Dereference •