CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2022-48705 – wifi: mt76: mt7921e: fix crash in chip reset fail
https://notcve.org/view.php?id=CVE-2022-48705
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix crash in chip reset fail In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own failed. [ 5857.353423] mt7921e 0000:3b:00.0: driver own failed [ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own [ 5859.633430] mt7921e 0000:3b:00.0: driver own failed [ 5859.633444] ------------[ cut here ]------------ [ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d [ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common] [ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150 [ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202 ...... [ 5859.633766] Call Trace: [ 5859.633768] <TASK> [ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e] [ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common] [ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common] [ 5859.633794] ? __kasan_check_read+0x11/0x20 [ 5859.633802] process_one_work+0x7ee/0x1320 [ 5859.633810] worker_thread+0x53c/0x1240 [ 5859.633818] kthread+0x2b8/0x370 [ 5859.633824] ? • https://git.kernel.org/stable/c/0efaf31dec572d3aac4316c6d952e06d1c33adc4 https://git.kernel.org/stable/c/cdb39e251f864910b2fb6c099b1ef9d12c6e22c7 https://git.kernel.org/stable/c/f7f3001723e337568017e8617974f29bc8b2f595 https://git.kernel.org/stable/c/fa3fbe64037839f448dc569212bafc5a495d8219 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2022-48704 – drm/radeon: add a force flush to delay work when radeon
https://notcve.org/view.php?id=CVE-2022-48704
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: drm/radeon: agregue un vaciado forzado para retrasar el trabajo cuando radeon. Aunque la tarjeta radeon protege y espera a que la gpu termine de procesar los anillos de lotes actuales, todavía existe un caso de esquina en el que el bloqueo de radeon funciona. Es posible que la cola no se haya vaciado por completo y, mientras tanto, la función radeon_suspend_kms() ha llamado a pci_set_power_state() para poner el dispositivo en estado D3hot. • https://git.kernel.org/stable/c/b878da58df2c40b08914d3960e2224040fd1fbfe https://git.kernel.org/stable/c/4e25e8f27fdbdc6fd55cc572a9939bf24500b9e8 https://git.kernel.org/stable/c/c0a45f41fde4a0f2c900f719817493ee5c4a5aa3 https://git.kernel.org/stable/c/c72d97146fc5a4dff381b1737f6167e89860430d https://git.kernel.org/stable/c/826b46fd5974113515abe9e4fc8178009a8ce18c https://git.kernel.org/stable/c/5a7a5b2edac4b05abd744eeaebda46d9dacd952d https://git.kernel.org/stable/c/16cb367daa446923d82e332537f446a4cc784b40 https://git.kernel.org/stable/c/f461950fdc374a3ada5a63c669d997de4 •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2022-48695 – scsi: mpt3sas: Fix use-after-free warning
https://notcve.org/view.php?id=CVE-2022-48695
In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: scsi: mpt3sas: Corrija la advertencia de use-after-free. Corrija la siguiente advertencia de use-after-free que se observa durante el reinicio del controlador: refcount_t: underflow; use-after-free. ADVERTENCIA: CPU: 23 PID: 5399 en lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 A user after-free vulnerability was found in the Linux kernel in the refcount_t variable when performing the controller reset. This issue could lead to denial of service of the system. • https://git.kernel.org/stable/c/b8fc9e91b931215110ba824d1a2983c5f60b6f82 https://git.kernel.org/stable/c/d4959d09b76eb7a4146f5133962b88d3bddb63d6 https://git.kernel.org/stable/c/82efb917eeb27454dc4c6fe26432fc8f6c75bc16 https://git.kernel.org/stable/c/5682c94644fde72f72bded6580c38189ffc856b5 https://git.kernel.org/stable/c/ea10a652ad2ae2cf3eced6f632a5c98f26727057 https://git.kernel.org/stable/c/6229fa494a5949be209bc73afbc5d0a749c2e3c7 https://git.kernel.org/stable/c/41acb064c4e013808bc7d5fc1b506fa449425b0b https://git.kernel.org/stable/c/991df3dd5144f2e6b1c38b8d20ed3d4d2 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2022-48690 – ice: Fix DMA mappings leak
https://notcve.org/view.php?id=CVE-2022-48690
In the Linux kernel, the following vulnerability has been resolved: ice: Fix DMA mappings leak Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ice: Reparar fuga de asignaciones DMA. Reparar fuga cuando el usuario cambia los parámetros del anillo. Durante la reasignación de búferes RX, se crean nuevas asignaciones DMA para esos búferes. • https://git.kernel.org/stable/c/617f3e1b588c802517c236087561c6bcb0b4afd6 https://git.kernel.org/stable/c/07f40e9f0ff342eb3e97d5c544783b7cb641689c https://git.kernel.org/stable/c/7e753eb675f0523207b184558638ee2eed6c9ac2 •
CVSS: 5.5EPSS: 0%CPEs: 2EXPL: 0CVE-2022-48703 – thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
https://notcve.org/view.php?id=CVE-2022-48703
In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: Thermal/int340x_thermal: maneja data_vault cuando el valor es ZERO_SIZE_PTR. En algunos casos, el GDDV devuelve un paquete con un buffer que tiene longitud cero. Provoca que kmemdup() devuelva ZERO_SIZE_PTR (0x10). • https://git.kernel.org/stable/c/dae42083b045a4ddf71c57cf350cb2412b5915c2 https://git.kernel.org/stable/c/7931e28098a4c1a2a6802510b0cbe57546d2049d https://access.redhat.com/security/cve/CVE-2022-48703 https://bugzilla.redhat.com/show_bug.cgi?id=2278960 •