CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2021-47399 – ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
https://notcve.org/view.php?id=CVE-2021-47399
In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. • https://git.kernel.org/stable/c/4a9b32f30f805ca596d76605903a48eab58e0b88 https://git.kernel.org/stable/c/20f6c4a31a525edd9ea6243712b868ba0e4e331e https://git.kernel.org/stable/c/2744341dd52e935344ca1b4bf189ba0d182a3e8e https://git.kernel.org/stable/c/513e605d7a9ce136886cb42ebb2c40e9a6eb6333 •
CVSS: -EPSS: 0%CPEs: 2EXPL: 0CVE-2021-47398 – RDMA/hfi1: Fix kernel pointer leak
https://notcve.org/view.php?id=CVE-2021-47398
In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: RDMA/hfi1: corrige la fuga del puntero del kernel. Los punteros deben imprimirse con %p o %px en lugar de convertirlos a 'unsigned long long' e imprimirse con %llx. Cambie %llx a %p para imprimir el puntero seguro. • https://git.kernel.org/stable/c/042a00f93aad5874937e00f36e68301f7e3a0af1 https://git.kernel.org/stable/c/714bfabe5f2901d96902e271d7217601fe4703e5 https://git.kernel.org/stable/c/7d5cfafe8b4006a75b55c2f1fdfdb363f9a5cc98 •
CVSS: -EPSS: 0%CPEs: 6EXPL: 0CVE-2021-47397 – sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
https://notcve.org/view.php?id=CVE-2021-47397
In the Linux kernel, the following vulnerability has been resolved: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: <IRQ> sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297 En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: sctp: se rompe si skb_header_pointer devuelve NULL en sctp_rcv_ootb. Siempre debemos verificar si el retorno de skb_header_pointer es NULL antes de usarlo; de lo contrario, puede causar null-ptr-deref, como informó syzbot: KASAN : null-ptr-deref en el rango [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [en línea] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input .c:196 Seguimiento de llamadas : sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 incluir/linux /netfilter.h:307 [en línea] NF_HOOK include/linux/netfilter.h:301 [en línea] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [en línea] ip6_rcv_finish net/ipv6/ip6_input.c:76 [en línea] NF_HOOK include/linux/netfilter.h:307 [en línea] NF_HOOK include/linux/netfilter.h:301 [en línea] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c :297 • https://git.kernel.org/stable/c/3acb50c18d8d6650f10919464ade4dcdaf41d62f https://git.kernel.org/stable/c/77bc7dcf0fcc1519341a91788d7a2914fcfddf6d https://git.kernel.org/stable/c/8c630a7b4f9dec63f08bd881ab77984a724a5124 https://git.kernel.org/stable/c/ec018021cf445abbe8e2f3e2a7f1dcc813cb8ea1 https://git.kernel.org/stable/c/9c6591ae8e63f93c895ad5e2703c36c548aac997 https://git.kernel.org/stable/c/8180611c238e11676612eb2a9828b1c7a3a4d77b https://git.kernel.org/stable/c/f7e745f8e94492a8ac0b0a26e25f2b19d342918f •
CVSS: -EPSS: 0%CPEs: 4EXPL: 0CVE-2021-47396 – mac80211-hwsim: fix late beacon hrtimer handling
https://notcve.org/view.php?id=CVE-2021-47396
In the Linux kernel, the following vulnerability has been resolved: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. • https://git.kernel.org/stable/c/01e59e467ecf976c782eecd4dc99644802cc60e2 https://git.kernel.org/stable/c/9bee85de2c8155388c09a2e1530a243ec1c96f05 https://git.kernel.org/stable/c/2c204cf594df3b9468368dc9d0b24d482d93cda7 https://git.kernel.org/stable/c/ed2adf69e29848d1eb9df99633dde655421c92ed https://git.kernel.org/stable/c/313bbd1990b6ddfdaa7da098d0c56b098a833572 •
CVSS: -EPSS: 0%CPEs: 7EXPL: 0CVE-2021-47395 – mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap
https://notcve.org/view.php?id=CVE-2021-47395
In the Linux kernel, the following vulnerability has been resolved: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: mac80211: límite inyectado de vht mcs/nss en ieee80211_parse_tx_radiotap. Limite los valores máximos para vht mcs y nss en la rutina ieee80211_parse_tx_radiotap para corregir la siguiente advertencia reportada por syzbot: ADVERTENCIA: CPU: 0 PID : 10717 en include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [en línea] ADVERTENCIA: CPU: 0 PID: 10717 en include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12 d0 neto/ mac80211/tx.c:2244 Módulos vinculados en: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Nombre del hardware: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01 /2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [en línea] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 86f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000ffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000( 0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 000000000015 06f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffe0ff0 DR7: 0000000000000600 ieee80211_monitor_select_queue+0xa6 /0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [ en línea] __bpf_redirect_no_mac net/core/filter.c:2139 [en línea] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [en línea] bpf_clone_redirect+0x2ae/0x420 net/core /filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [en línea] __bpf_prog_run include/linux/filter.h:624 [en línea] bpf_prog_run include/linux/filter.h:631 [ en línea] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [en línea] 5df0 núcleo/bpf/ syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [en línea] __se_sys_bpf kernel/bpf/syscall.c:4689 [en línea] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 4 arco/x86/ entrada/common.c:50 [en línea] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entrada_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 • https://git.kernel.org/stable/c/646e76bb5daf4ca38438c69ffb72cccb605f3466 https://git.kernel.org/stable/c/e5bb852aa2ad963074f0ad73030dbc20a30853e3 https://git.kernel.org/stable/c/ce5f372f5f084ff51c285fc27b232f15a3d00f0b https://git.kernel.org/stable/c/76538c7b4df314bb937e44c5cb1782f37d47443c https://git.kernel.org/stable/c/ab85997465b972d39d9747fc16311fa5773374b2 https://git.kernel.org/stable/c/1282bb00835ff79d2d9c023055d514df5b4de260 https://git.kernel.org/stable/c/997ee230e4f5285cd98445c102d9033c7ec4814b https://git.kernel.org/stable/c/13cb6d826e0ac0d144b0d48191ff1a111 •