CVE-2021-0207 – NFX250, NFX350, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series: Certain genuine traffic received by the Junos OS device will be discarded instead of forwarded.
https://notcve.org/view.php?id=CVE-2021-0207
An improper interpretation conflict of certain data between certain software components within the Juniper Networks Junos OS devices does not allow certain traffic to pass through the device upon receipt from an ingress interface filtering certain specific types of traffic which is then being redirected to an egress interface on a different VLAN. This causes a Denial of Service (DoS) to those clients sending these particular types of traffic. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious, and can be targeted to the device, or destined through it for the issue to occur. This issues affects IPv4 and IPv6 traffic. An indicator of compromise may be found by checking log files. • https://kb.juniper.net/JSA11097 • CWE-115: Misinterpretation of Input CWE-436: Interpretation Conflict •
CVE-2021-0205 – Junos OS: MX Series: Dynamic filter fails to match IPv6 prefix
https://notcve.org/view.php?id=CVE-2021-0205
When the "Intrusion Detection Service" (IDS) feature is configured on Juniper Networks MX series with a dynamic firewall filter using IPv6 source or destination prefix, it may incorrectly match the prefix as /32, causing the filter to block unexpected traffic. This issue affects only IPv6 prefixes when used as source and destination. This issue affects MX Series devices using MS-MPC, MS-MIC or MS-SPC3 service cards with IDS service configured. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S10 on MX Series; 17.4 versions prior to 17.4R3-S3 on MX Series; 18.1 versions prior to 18.1R3-S11 on MX Series; 18.2 versions prior to 18.2R3-S6 on MX Series; 18.3 versions prior to 18.3R3-S4 on MX Series; 18.4 versions prior to 18.4R3-S6 on MX Series; 19.1 versions prior to 19.1R2-S2, 19.1R3-S3 on MX Series; 19.2 versions prior to 19.2R3-S1 on MX Series; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1 on MX Series; 19.4 versions prior to 19.4R3 on MX Series; 20.1 versions prior to 20.1R2 on MX Series; 20.2 versions prior to 20.2R2 on MX Series; Cuando la funcionalidad "Intrusion Detection Service" (IDS) está configurada en la serie Juniper Networks MX con un filtro de firewall dinámico usando el prefijo de origen o destino de IPv6, puede coincidir incorrectamente con el prefijo como /32, causando que el filtro bloquee el tráfico inesperado. Este problema afecta solo a los prefijos de IPv6 cuando se utilizan como origen y destino. • https://kb.juniper.net/JSA11095 • CWE-284: Improper Access Control •
CVE-2021-0204 – Junos OS: dexp Local Privilege Escalation vulnerabilities in SUID binaries
https://notcve.org/view.php?id=CVE-2021-0204
A sensitive information disclosure vulnerability in delta-export configuration utility (dexp) of Juniper Networks Junos OS may allow a locally authenticated shell user the ability to create and read database files generated by the dexp utility, including password hashes of local users. Since dexp is shipped with setuid permissions enabled and is owned by the root user, this vulnerability may allow a local privileged user the ability to run dexp with root privileges and access sensitive information in the dexp database. This issue affects Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D34; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2. Una vulnerabilidad de divulgación de información confidencial en el recurso de configuración de delta-export (dexp) de Juniper Networks Junos OS puede permitir a un usuario del shell autenticado local la capacidad de crear y leer archivos de base de la datos generados por el recurso dexp, incluidos los hash de contraseña de usuarios locales. Dado que dexp es enviado con permisos setuid habilitados y es propiedad del usuario root, esta vulnerabilidad puede permitir a un usuario privilegiado local la capacidad de ejecutar dexp con privilegios root y acceder a información confidencial en la base de datos de dexp. • https://kb.juniper.net/JSA11114 • CWE-250: Execution with Unnecessary Privileges CWE-269: Improper Privilege Management •
CVE-2021-0203 – Junos OS: EX and QFX5K Series: Storm Control does not work as expected when Redundant Trunk Group is configured
https://notcve.org/view.php?id=CVE-2021-0203
On Juniper Networks EX and QFX5K Series platforms configured with Redundant Trunk Group (RTG), Storm Control profile applied on the RTG interface might not take affect when it reaches the threshold condition. Storm Control enables the device to monitor traffic levels and to drop broadcast, multicast, and unknown unicast packets when a specified traffic level is exceeded, thus preventing packets from proliferating and degrading the LAN. Note: this issue does not affect EX2200, EX3300, EX4200, and EX9200 Series. This issue affects Juniper Networks Junos OS on EX Series and QFX5K Series: 15.1 versions prior to 15.1R7-S7; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S3; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2. En las plataformas Juniper Networks Serie EX y QFX5K configuradas con Redundant Trunk Group (RTG), el perfil Storm Control aplicado en la interfaz RTG puede no tener efecto cuando alcanza la condición de umbral. • https://kb.juniper.net/JSA11093 • CWE-794: Incomplete Filtering of Multiple Instances of Special Elements •
CVE-2021-0202 – Junos OS: MX Series, EX9200 Series: Trio-based MPC memory leak when Integrated Routing and Bridging (IRB) interface is mapped to a VPLS instance or a Bridge-Domain
https://notcve.org/view.php?id=CVE-2021-0202
On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. • https://kb.juniper.net/JSA11092 • CWE-400: Uncontrolled Resource Consumption CWE-401: Missing Release of Memory after Effective Lifetime •