CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0CVE-2023-52627 – iio: adc: ad7091r: Allow users to configure device events
https://notcve.org/view.php?id=CVE-2023-52627
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7091r: Allow users to configure device events AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: iio: adc: ad7091r: permitir a los usuarios configurar eventos de dispositivo Los dispositivos AD7091R-5 son compatibles con el controlador ad7091r-5 junto con el controlador ad7091r-base. Esos controladores declararon eventos iio para notificar al espacio del usuario cuando las lecturas de ADC caen por debajo de los umbrales de los registros de límite bajo o por encima de los valores establecidos en los registros de límite alto. Sin embargo, para configurar los eventos de iio y sus umbrales, se debe implementar un conjunto de funciones de devolución de llamada que no estaban presentes hasta ahora. • https://git.kernel.org/stable/c/ca69300173b642ba64118200172171ea5967b6c5 https://git.kernel.org/stable/c/1eba6f7ffa295a0eec098c107043074be7cc4ec5 https://git.kernel.org/stable/c/49f322ce1f265935f15e5512da69a399f27a5091 https://git.kernel.org/stable/c/137568aa540a9f587c48ff7d4c51cdba08cfe9a4 https://git.kernel.org/stable/c/89c4e63324e208a23098f7fb15c00487cecbfed2 https://git.kernel.org/stable/c/55aca2ce91a63740278502066beaddbd841af9c6 https://git.kernel.org/stable/c/020e71c7ffc25dfe29ed9be6c2d39af7bd7f661f https://lists.debian.org/debian-lts-announce/2024/06/ •
CVSS: 4.4EPSS: 0%CPEs: 2EXPL: 0CVE-2023-52625 – drm/amd/display: Refactor DMCUB enter/exit idle interface
https://notcve.org/view.php?id=CVE-2023-52625
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Refactor DMCUB enter/exit idle interface [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] We need to exit out of the idle state prior to sending a command, but the process that performs the exit also invokes a command itself. Fixing this issue involves the following: 1. Using a software state to track whether or not we need to start the process to exit idle or notify idle. It's possible for the hardware to have exited an idle state without driver knowledge, but entering one is always restricted to a driver allow - which makes the SW state vs HW state mismatch issue purely one of optimization, which should seldomly be hit, if at all. 2. Refactor any instances of exit/notify idle to use a single wrapper that maintains this SW state. This works simialr to dc_allow_idle_optimizations, but works at the DMCUB level and makes sure the state is marked prior to any notify/exit idle so we don't enter an infinite loop. 3. Make sure we exit out of idle prior to sending any commands or waiting for DMCUB idle. This patch takes care of 1/2. A future patch will take care of wrapping DMCUB command submission with calls to this new interface. • https://git.kernel.org/stable/c/820c3870c491946a78950cdf961bf40e28c1025f https://git.kernel.org/stable/c/8e57c06bf4b0f51a4d6958e15e1a99c9520d00fa https://access.redhat.com/security/cve/CVE-2023-52625 https://bugzilla.redhat.com/show_bug.cgi?id=2271682 • CWE-99: Improper Control of Resource Identifiers ('Resource Injection') •
CVSS: 4.4EPSS: 0%CPEs: 2EXPL: 0CVE-2023-52624 – drm/amd/display: Wake DMCUB before executing GPINT commands
https://notcve.org/view.php?id=CVE-2023-52624
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before executing GPINT commands [Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: drm/amd/display: Activa DMCUB antes de ejecutar comandos GPINT [Por qué] DMCUB puede estar inactivo cuando intentamos interactuar con el HW a través del buzón GPINT, lo que provoca un bloqueo del sistema. [Cómo] Agregue dc_wake_and_execute_gpint() para ajustar la secuencia de activación, ejecución y suspensión. Si GPINT se ejecuta correctamente, DMCUB volverá a entrar en modo de suspensión después de que se devuelva la respuesta opcional. Funciona de manera similar a la interfaz de comando de la bandeja de entrada. • https://git.kernel.org/stable/c/2ef98c6d753a744e333b7e34b9cf687040fba57d https://git.kernel.org/stable/c/e5ffd1263dd5b44929c676171802e7b6af483f21 https://access.redhat.com/security/cve/CVE-2023-52624 https://bugzilla.redhat.com/show_bug.cgi?id=2271684 • CWE-99: Improper Control of Resource Identifiers ('Resource Injection') •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2023-52623 – SUNRPC: Fix a suspicious RCU usage warning
https://notcve.org/view.php?id=CVE-2023-52623
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [ 57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ? • https://git.kernel.org/stable/c/fece80a2a6718ed58487ce397285bb1b83a3e54e https://git.kernel.org/stable/c/7a96d85bf196c170dcf1b47a82e9bb97cca69aa6 https://git.kernel.org/stable/c/c430e6bb43955c6bf573665fcebf31694925b9f7 https://git.kernel.org/stable/c/f8cf4dabbdcb8bef85335b0ed7ad5b25fd82ff56 https://git.kernel.org/stable/c/e8ca3e73301e23e8c0ac0ce2e6bac4545cd776e0 https://git.kernel.org/stable/c/69c7eeb4f622c2a28da965f970f982db171f3dc6 https://git.kernel.org/stable/c/8f860c8407470baff2beb9982ad6b172c94f1d0a https://git.kernel.org/stable/c/31b62908693c90d4d07db597e685d9f25 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: 5.5EPSS: 0%CPEs: 8EXPL: 0CVE-2023-52622 – ext4: avoid online resizing failures due to oversized flex bg
https://notcve.org/view.php?id=CVE-2023-52622
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: <TASK> __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ext4: evita fallos de cambio de tamaño en línea debido a flex bg sobredimensionado Cuando redimensionamos en línea un sistema de archivos ext4 con un flexbg_size sobredimensionado, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G se activa el siguiente WARN_ON: ===================================== ============================== ADVERTENCIA: CPU: 0 PID: 427 en mm/page_alloc.c:4402 __alloc_pages+0x411/ 0x550 Módulos vinculados en: sg(E) CPU: 0 PID: 427 Comm: resize2fs Contaminado: GE 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Seguimiento de llamadas: __kmalloc_large_node+0xa2/0x200 __kmalloc+ 0x16e/0x290 text4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 text4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ======== =============== ============================================ Esto se debe a que flexbg_size también lo es grande y el tamaño de la matriz new_group_data que se asignará excede MAX_ORDER. • https://git.kernel.org/stable/c/cd1f93ca97a9136989f3bd2bf90696732a2ed644 https://git.kernel.org/stable/c/b183fe8702e78bba3dcef8e7193cab6898abee07 https://git.kernel.org/stable/c/cfbbb3199e71b63fc26cee0ebff327c47128a1e8 https://git.kernel.org/stable/c/d76c8d7ffe163c6bf2f1ef680b0539c2b3902b90 https://git.kernel.org/stable/c/6d2cbf517dcabc093159cf138ad5712c9c7fa954 https://git.kernel.org/stable/c/8b1413dbfe49646eda2c00c0f1144ee9d3368e0c https://git.kernel.org/stable/c/dc3e0f55bec4410f3d74352c4a7c79f518088ee2 https://git.kernel.org/stable/c/5d1935ac02ca5aee364a449a35e2977ea • CWE-131: Incorrect Calculation of Buffer Size •