Page 4 of 50 results (0.005 seconds)

CVSS: 7.4EPSS: 0%CPEs: 204EXPL: 0

Due to a vulnerability in DDoS protection in Juniper Networks Junos OS and Junos OS Evolved on QFX5K Series switches in a VXLAN configuration, instability might be experienced in the underlay network as a consequence of exceeding the default ddos-protection aggregate threshold. If an attacker on a client device on the overlay network sends a high volume of specific, legitimate traffic in the overlay network, due to an improperly detected DDoS violation, the leaf might not process certain L2 traffic, sent by spines in the underlay network. Continued receipt and processing of the high volume traffic will sustain the Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX5K Series: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved on QFX5220: All versions prior to 20.3R2-EVO. • https://kb.juniper.net/JSA11150 • CWE-755: Improper Handling of Exceptional Conditions •

CVSS: 6.8EPSS: 0%CPEs: 344EXPL: 0

A Race Condition (Concurrent Execution using Shared Resource with Improper Synchronization) vulnerability in the firewall process (dfwd) of Juniper Networks Junos OS allows an attacker to bypass the firewall rule sets applied to the input loopback filter on any interfaces of a device. This issue is detectable by reviewing the PFE firewall rules, as well as the firewall counters and seeing if they are incrementing or not. For example: show firewall Filter: __default_bpdu_filter__ Filter: FILTER-INET-01 Counters: Name Bytes Packets output-match-inet 0 0 <<<<<< missing firewall packet count This issue affects: Juniper Networks Junos OS 14.1X53 versions prior to 14.1X53-D53 on QFX Series; 14.1 versions 14.1R1 and later versions prior to 15.1 versions prior to 15.1R7-S6 on QFX Series, PTX Series; 15.1X53 versions prior to 15.1X53-D593 on QFX Series; 16.1 versions prior to 16.1R7-S7 on QFX Series, PTX Series; 16.2 versions prior to 16.2R2-S11, 16.2R3 on QFX Series, PTX Series; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2 on QFX Series, PTX Series; 17.2 versions prior to 17.2R1-S9, 17.2R3-S3 on QFX Series, PTX Series; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on QFX Series, PTX Series; 17.4 versions prior to 17.4R2-S9, 17.4R3 on QFX Series, PTX Series; 18.1 versions prior to 18.1R3-S9 on QFX Series, PTX Series; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3 on QFX Series, PTX Series; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1 on QFX Series, PTX Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R2-S7, 18.4R3 on QFX Series, PTX Series; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3 on QFX Series, PTX Series; 19.2 versions prior to 19.2R1-S3, 19.2R2 on QFX Series, PTX Series. Una vulnerabilidad de Condición de Carrera (Ejecución Concurrente usando Recursos Compartidos con Sincronización Inapropiada) en el proceso de firewall (dfwd) de Juniper Networks Junos OS, permite a un atacante omitir los conjuntos de reglas de firewall aplicados al filtro de bucle de entrada en cualquier interfaz de un dispositivo.&#xa0;Este problema es detectable al revisar las reglas de firewall de PFE, así como los contadores de firewall y visualizar si aumentan o no. • https://kb.juniper.net/JSA11140 • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •

CVSS: 6.5EPSS: 0%CPEs: 226EXPL: 0

On Juniper Networks EX4300-MP Series, EX4600 Series, EX4650 Series, QFX5K Series deployed as a Virtual Chassis with a specific Layer 2 circuit configuration, Packet Forwarding Engine manager (FXPC) process may crash and restart upon receipt of specific layer 2 frames. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series, EX4650 Series, QFX5K Series 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4, 17.4R3-S5; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2; En Juniper Networks Serie EX4300-MP, Serie EX4600, Serie EX4650, Serie QFX5K implementadas como un Virtual Chassis con una configuración de circuito de capa 2 específica, el proceso del Packet Forwarding Engine manager (FXPC) puede bloquearse y reiniciarse al recibir tramas de capa 2 específicas.&#xa0;La recepción y el procesamiento continuo de este paquete crearán una condición sostenida de Denegación de Servicio (DoS).&#xa0;Este problema afecta a: Juniper Networks Junos OS en las versiones Serie EX4300-MP, Serie EX4600, Serie EX4650, Serie QFX5K versiones 15.1 anteriores a 15.1R7-S9;&#xa0;versiones 17.3 anteriores a 17.3R3-S11;&#xa0;versiones 17.4 anteriores a 17.4R2-S13, 17.4R3-S4, 17.4R3-S5;&#xa0;versiones 18.2 anteriores a 18.2R3-S8;&#xa0;versiones 18.3 anteriores a 18.3R3-S4;&#xa0;versiones 18.4 anteriores a 18.4R2-S7, 18.4R3-S6;&#xa0;versiones 19.1 anteriores a 19.1R3-S4;&#xa0;versiones 19.2 anteriores a 19.2R1-S6, 19.2R3-S1;&#xa0;versiones 19.3 anteriores a 19.3R3-S1;&#xa0;versiones 19.4 anteriores a 19.4R2-S4, 19.4R3-S1;&#xa0;versiones 20.1 anteriores a 20.1R2;&#xa0;versiones 20.2 anteriores a 20.2R2, 20.2R3;&#xa0;versiones 20.3 anteriores a 20.3R1-S2, 20.3R2; • https://kb.juniper.net/JSA11132 •

CVSS: 5.8EPSS: 0%CPEs: 144EXPL: 0

Due to an improper Initialization vulnerability on Juniper Networks Junos OS QFX5100-96S devices with QFX 5e Series image installed, ddos-protection configuration changes will not take effect beyond the default DDoS (Distributed Denial of Service) settings when configured from the CLI. The DDoS protection (jddosd) daemon allows the device to continue to function while protecting the packet forwarding engine (PFE) during the DDoS attack. When this issue occurs, the default DDoS settings within the PFE apply, as CPU bound packets will be throttled and dropped in the PFE when the limits are exceeded. To check if the device has this issue, the administrator can execute the following command to monitor the status of DDoS protection: user@device> show ddos-protection protocols error: the ddos-protection subsystem is not running This issue affects only QFX5100-96S devices. No other products or platforms are affected by this issue. • https://kb.juniper.net/JSA11129 • CWE-665: Improper Initialization •

CVSS: 7.4EPSS: 0%CPEs: 285EXPL: 0

A vulnerability in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) to the device by sending certain crafted protocol packets from an adjacent device with invalid payloads to the device. These crafted packets, which should be discarded, are instead replicated and sent to the RE. Over time, a Denial of Service (DoS) occurs. Continued receipt of these crafted protocol packets will cause an extended Denial of Service (DoS) condition, which may cause wider traffic impact due to protocol flapping. An indication of compromise is to check "monitor interface traffic" on the ingress and egress port packet counts. • https://kb.juniper.net/JSA11094 • CWE-16: Configuration •