CVSS: 6.5EPSS: 0%CPEs: 121EXPL: 0CVE-2020-1670 – Junos OS: EX4300 Series: High CPU load due to receipt of specific IPv4 packets
https://notcve.org/view.php?id=CVE-2020-1670
On Juniper Networks EX4300 Series, receipt of a stream of specific IPv4 packets can cause Routing Engine (RE) high CPU load, which could lead to network protocol operation issue and traffic interruption. This specific packets can originate only from within the broadcast domain where the device is connected. This issue occurs when the packets enter to the IRB interface. Only IPv4 packets can trigger this issue. IPv6 packets cannot trigger this issue. • https://kb.juniper.net https://kb.juniper.net/InfoCenter/index?page=content&id=JSA11067&actp=SUBSCRIPTION • CWE-400: Uncontrolled Resource Consumption •
CVSS: 8.3EPSS: 0%CPEs: 56EXPL: 0CVE-2020-1667 – Junos OS: MX Series: Services card might restart due to a race condition when DNS filtering is enabled.
https://notcve.org/view.php?id=CVE-2020-1667
When DNS filtering is enabled on Juniper Networks Junos MX Series with one of the following cards MS-PIC, MS-MIC or MS-MPC, an incoming stream of packets processed by the Multiservices PIC Management Daemon (mspmand) process might be bypassed due to a race condition. Due to this vulnerability, mspmand process, responsible for managing "URL Filtering service", can crash, causing the Services PIC to restart. While the Services PIC is restarting, all PIC services including DNS filtering service (DNS sink holing) will be bypassed until the Services PIC completes its boot process. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S8; 18.3 versions prior to 18.3R3-S1; 18.4 versions prior to 18.4R3; 19.1 versions prior to 19.1R3; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3. This issue does not affect Juniper Networks Junos OS 17.4, 18.1, and 18.2. • https://kb.juniper.net https://kb.juniper.net/InfoCenter/index?page=content&id=JSA11064&cat=MX_SERIES&actp=LIST • CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') •
CVSS: 5.3EPSS: 0%CPEs: 103EXPL: 0CVE-2020-1665 – Junos OS: MX series/EX9200 Series: IPv6 DDoS protection does not work as expected.
https://notcve.org/view.php?id=CVE-2020-1665
On Juniper Networks MX Series and EX9200 Series, in a certain condition the IPv6 Distributed Denial of Service (DDoS) protection might not take affect when it reaches the threshold condition. The DDoS protection allows the device to continue to function while it is under DDoS attack, protecting both the Routing Engine (RE) and the Flexible PIC Concentrator (FPC) during the DDoS attack. When this issue occurs, the RE and/or the FPC can become overwhelmed, which could disrupt network protocol operations and/or interrupt traffic. This issue does not affect IPv4 DDoS protection. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). • https://kb.juniper.net/JSA11062 https://kb.juniper.net/KB25385 • CWE-794: Incomplete Filtering of Multiple Instances of Special Elements •
CVSS: 7.8EPSS: 0%CPEs: 137EXPL: 0CVE-2020-1664 – Junos OS: Buffer overflow vulnerability in device control daemon
https://notcve.org/view.php?id=CVE-2020-1664
A stack buffer overflow vulnerability in the device control daemon (DCD) on Juniper Networks Junos OS allows a low privilege local user to create a Denial of Service (DoS) against the daemon or execute arbitrary code in the system with root privilege. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D53, 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2. Versions of Junos OS prior to 17.3 are unaffected by this vulnerability. Una vulnerabilidad de desbordamiento del búfer de la pila en device control daemon (DCD) en Juniper Networks Junos OS, permite a un usuario local con pocos privilegios crear una Denegación de Servicio (DoS) contra el demonio o ejecutar código arbitrario en el sistema con privilegios root. Este problema afecta a Juniper Networks Junos OS: versiones 17.3 anteriores a 17.3R3-S9; versiones 17.4 anteriores a 17.4R2-S12, 17.4R3-S3; versiones 18.1 anteriores a 18.1R3-S11; versiones 18.2 anteriores a 18.2R3-S6; versiones 18.2X75 anteriores a 18.2X75-D53, 18.2X75-D65; versiones 18.3 anteriores a 18.3R2-S4, 18.3R3-S4; versiones 18.4 anteriores a 18.4R2-S5, 18.4R3-S5; versiones 19.1 anteriores a 19.1R3-S3; versiones 19.2 anteriores a 19.2R1-S5, 19.2R3; versiones 19.3 anteriores a 19.3R2-S4, 19.3R3; versiones 19.4 anteriores a 19.4R1-S3, 19.4R2-S2, 19.4R3; versiones 20.1 anteriores a 20.1R1-S4, 20.1R2; versiones 20.2 anteriores a 20.2R1-S1, 20.2R2 • https://kb.juniper.net/JSA11061 • CWE-121: Stack-based Buffer Overflow CWE-787: Out-of-bounds Write •
CVSS: 7.5EPSS: 0%CPEs: 59EXPL: 0CVE-2020-1662 – Junos OS and Junos OS Evolved: RPD crash due to BGP session flapping.
https://notcve.org/view.php?id=CVE-2020-1662
On Juniper Networks Junos OS and Junos OS Evolved devices, BGP session flapping can lead to a routing process daemon (RPD) crash and restart, limiting the attack surface to configured BGP peers. This issue only affects devices with BGP damping in combination with accepted-prefix-limit configuration. When the issue occurs the following messages will appear in the /var/log/messages: rpd[6046]: %DAEMON-4-BGP_PREFIX_THRESH_EXCEEDED: XXXX (External AS x): Configured maximum accepted prefix-limit threshold(1800) exceeded for inet6-unicast nlri: 1984 (instance master) rpd[6046]: %DAEMON-3-BGP_CEASE_PREFIX_LIMIT_EXCEEDED: 2001:x:x:x::2 (External AS x): Shutting down peer due to exceeding configured maximum accepted prefix-limit(2000) for inet6-unicast nlri: 2001 (instance master) rpd[6046]: %DAEMON-4: bgp_rt_maxprefixes_check_common:9284: NOTIFICATION sent to 2001:x:x:x::2 (External AS x): code 6 (Cease) subcode 1 (Maximum Number of Prefixes Reached) AFI: 2 SAFI: 1 prefix limit 2000 kernel: %KERN-5: mastership_relinquish_on_process_exit: RPD crashed on master RE. Sending SIGUSR2 to chassisd (5612:chassisd) to trigger RE switchover This issue affects: Juniper Networks Junos OS: 17.2R3-S3; 17.3 version 17.3R3-S3 and later versions, prior to 17.3R3-S8; 17.4 version 17.4R2-S4, 17.4R3 and later versions, prior to 17.4R2-S10, 17.4R3-S2; 18.1 version 18.1R3-S6 and later versions, prior to 18.1R3-S10; 18.2 version 18.2R3 and later versions, prior to 18.2R3-S4; 18.2X75 version 18.2X75-D50, 18.2X75-D60 and later versions, prior to 18.2X75-D53, 18.2X75-D65; 18.3 version 18.3R2 and later versions, prior to 18.3R2-S4, 18.3R3-S2; 18.4 version 18.4R2 and later versions, prior to 18.4R2-S5, 18.4R3-S2; 19.1 version 19.1R1 and later versions, prior to 19.1R2-S2, 19.1R3-S1; 19.2 version 19.2R1 and later versions, prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S2, 20.1R2. Juniper Networks Junos OS Evolved prior to 20.1R2-EVO. • https://kb.juniper.net/JSA11059 • CWE-20: Improper Input Validation •