Page 43 of 537 results (0.006 seconds)

CVSS: 7.5EPSS: 0%CPEs: 103EXPL: 0

15 Jan 2019 — The routing protocol daemon (RPD) process will crash and restart when a specific invalid IPv4 PIM Join packet is received. While RPD restarts after a crash, repeated crashes can result in an extended Denial of Service (DoS) condition. This issue only affects IPv4 PIM. IPv6 PIM is unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77; 12.3X48 versions prior to 12.3X48-D77; 15.1 versions prior to 15.1F6-S10, 15.1R6-S6, 15.1R7; 15.1X49 versions... • http://www.securityfocus.com/bid/106519 • CWE-19: Data Processing Errors •

CVSS: 7.5EPSS: 0%CPEs: 23EXPL: 0

15 Jan 2019 — On QFX and PTX Series, receipt of a malformed packet for J-Flow sampling might crash the FPC (Flexible PIC Concentrator) process which causes all interfaces to go down. By continuously sending the offending packet, an attacker can repeatedly crash the FPC process causing a sustained Denial of Service (DoS). This issue affects both IPv4 and IPv6 packet processing. Affected releases are Juniper Networks Junos OS on QFX and PTX Series: 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1;... • http://www.securityfocus.com/bid/106556 • CWE-19: Data Processing Errors •

CVSS: 5.5EPSS: 0%CPEs: 95EXPL: 0

15 Jan 2019 — A vulnerability in the SRX Series Service Gateway allows deleted dynamic VPN users to establish dynamic VPN connections until the device is rebooted. A deleted dynamic VPN connection should be immediately disallowed from establishing new VPN connections. Due to an error in token caching, deleted users are allowed to connect once a previously successful dynamic VPN connection has been established. A reboot is required to clear the cached authentication token. Affected releases are Junos OS on SRX Series: 12.... • http://www.securityfocus.com/bid/106668 • CWE-613: Insufficient Session Expiration •

CVSS: 9.8EPSS: 0%CPEs: 20EXPL: 0

15 Jan 2019 — On EX2300 and EX3400 series, stateless firewall filter configuration that uses the action 'policer' in combination with other actions might not take effect. When this issue occurs, the output of the command: show pfe filter hw summary will not show the entry for: RACL group Affected releases are Junos OS on EX2300 and EX3400 series: 15.1X53 versions prior to 15.1X53-D590; 18.1 versions prior to 18.1R3; 18.2 versions prior to 18.2R2. This issue affect both IPv4 and IPv6 firewall filter. En las series EX2300 ... • http://www.securityfocus.com/bid/106669 • CWE-794: Incomplete Filtering of Multiple Instances of Special Elements •

CVSS: 8.8EPSS: 0%CPEs: 295EXPL: 0

10 Oct 2018 — Receipt of a specific MPLS packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending specific MPLS packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. This issue affects both IPv4 and IPv6. This issue can only be exploited from within the MPLS domain. End-users connected to the CE device cannot cause this crash. • http://www.securitytracker.com/id/1041847 • CWE-20: Improper Input Validation •

CVSS: 9.8EPSS: 0%CPEs: 4EXPL: 0

10 Oct 2018 — An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series. Una configuración SSHD insegura en Juniper Device Manager (JDM) y el sistema operativo del host en dispositivos Juniper NFX Series podría perm... • http://www.securityfocus.com/bid/105565 • CWE-287: Improper Authentication •

CVSS: 8.8EPSS: 0%CPEs: 205EXPL: 0

10 Oct 2018 — Receipt of a specific Draft-Rosen MVPN control packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending the same specific Draft-Rosen MVPN control packet, an attacker can repeatedly crash the RPD process causing a prolonged denial of service. This issue may occur when the Junos OS device is configured for Draft-Rosen multicast virtual private network (MVPN). The VPN is multicast-enabled and configured to use Protocol Indepe... • http://www.securitytracker.com/id/1041848 • CWE-20: Improper Input Validation •

CVSS: 7.5EPSS: 2%CPEs: 10EXPL: 0

10 Oct 2018 — A vulnerability in the Routing Protocols Daemon (RPD) with Juniper Extension Toolkit (JET) support can allow a network based unauthenticated attacker to cause a severe memory exhaustion condition on the device. This can have an adverse impact on the system performance and availability. This issue only affects devices with JET support running Junos OS 17.2R1 and subsequent releases. Other versions of Junos OS are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 17.2 versions... • http://www.securityfocus.com/bid/105564 • CWE-400: Uncontrolled Resource Consumption •

CVSS: 7.5EPSS: 0%CPEs: 152EXPL: 0

10 Oct 2018 — A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to cause the Junos OS kernel to crash. Continued receipt of this specifically crafted malicious MPLS packet will cause a sustained Denial of Service condition. This issue require it to be received on an interface configured to receive this type of traffic. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D76 prior to 12.1X46-D81 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX... • http://www.securityfocus.com/bid/105701 • CWE-476: NULL Pointer Dereference •

CVSS: 7.5EPSS: 0%CPEs: 73EXPL: 0

10 Oct 2018 — A Denial of Service vulnerability in the SIP application layer gateway (ALG) component of Junos OS based platforms allows an attacker to crash MS-PIC, MS-MIC, MS-MPC, MS-DPC or SRX flow daemon (flowd) process. This issue affects Junos OS devices with NAT or stateful firewall configuration in combination with the SIP ALG enabled. SIP ALG is enabled by default on SRX Series devices except for SRX-HE devices. SRX-HE devices have SIP ALG disabled by default. The status of ALGs in SRX device can be obtained by e... • http://www.securitytracker.com/id/1041852 • CWE-20: Improper Input Validation •