CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-50099 – arm64: probes: Remove broken LDR (literal) uprobe support
https://notcve.org/view.php?id=CVE-2024-50099
In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Remove broken LDR (literal) uprobe support The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. • https://git.kernel.org/stable/c/9842ceae9fa8deae141533d52a6ead7666962c09 https://git.kernel.org/stable/c/cc86f2e9876c8b5300238cec6bf0bd8c842078ee https://git.kernel.org/stable/c/ae743deca78d9e4b7f4f60ad2f95e20e8ea057f9 https://git.kernel.org/stable/c/3728b4eb27910ffedd173018279a970705f2e03a https://git.kernel.org/stable/c/ad4bc35a6d22e9ff9b67d0d0c38bce654232f195 https://git.kernel.org/stable/c/bae792617a7e911477f67a3aff850ad4ddf51572 https://git.kernel.org/stable/c/9f1e7735474e7457a4d919a517900e46868ae5f6 https://git.kernel.org/stable/c/20cde998315a3d2df08e26079a3ea7501 •
CVSS: -EPSS: 0%CPEs: 4EXPL: 0CVE-2024-50098 – scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
https://notcve.org/view.php?id=CVE-2024-50098
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down There is a history of deadlock if reboot is performed at the beginning of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS shutdown, and at that time the audio driver was waiting on blk_mq_submit_bio() holding a mutex_lock while reading the fw binary. After that, a deadlock issue occurred while audio driver shutdown was waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down after a UFS shutdown will return an error. [ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown] [ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49] [ 31.907806]I[0: swapper/0: 0] Call trace: [ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40 [ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac [ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24 [ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec [ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280 [ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c [ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280 [ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158 [ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4 [ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0 [ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0 [ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4 [ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4 [ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter] [ 31.908783]I[0: swapper/0: 0] Call trace: [ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178 [ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c [ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: scsi: ufs: core: Establecer SDEV_OFFLINE cuando se apaga UFS. Hay un historial de interbloqueo si se realiza el reinicio al comienzo del arranque. SDEV_QUIESCE se estableció para todos los scsi_devices de LU por el apagado de UFS, y en ese momento el controlador de audio estaba esperando a blk_mq_submit_bio() sosteniendo un mutex_lock mientras leía el binario fw. • https://git.kernel.org/stable/c/b294ff3e34490f36233230e9ca70503d3924a6f3 https://git.kernel.org/stable/c/7de759fceacff5660abf9590d11114215a9d5f3c https://git.kernel.org/stable/c/7bd9af254275fad7071d85f04616560deb598d7d https://git.kernel.org/stable/c/7774d23622416dbbbdb21bf342b3f0d92cf1dc0f https://git.kernel.org/stable/c/19a198b67767d952c8f3d0cf24eb3100522a8223 •
CVSS: -EPSS: 0%CPEs: 7EXPL: 0CVE-2024-50096 – nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
https://notcve.org/view.php?id=CVE-2024-50096
In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: nouveau/dmem: Se corrige la vulnerabilidad en migrants_to_ram tras un error de copia. La función `nouveau_dmem_copy_one` garantiza que el comando de copia push se envíe al firmware del dispositivo, pero no rastrea si se ejecutó correctamente. En el caso de un error de copia (por ejemplo, fallo del firmware o hardware), el comando de copia push se enviará a través del canal de firmware y `nouveau_dmem_copy_one` probablemente informará el éxito, lo que llevará a la función `migrate_to_ram` a devolver una página HIGH_USER sucia al usuario. • https://git.kernel.org/stable/c/5be73b690875f7eb2d2defb54ccd7f2f12074984 https://git.kernel.org/stable/c/fd9bb7e996bab9b9049fffe3f3d3b50dee191d27 https://git.kernel.org/stable/c/73f75d2b5aee5a735cf64b8ab4543d5c20dbbdd9 https://git.kernel.org/stable/c/8c3de9282dde21ce3c1bf1bde3166a4510547aa9 https://git.kernel.org/stable/c/614bfb2050982d23d53d0d51c4079dba0437c883 https://git.kernel.org/stable/c/697e3ddcf1f8b68bd531fc34eead27c000bdf3e1 https://git.kernel.org/stable/c/ab4d113b6718b076046018292f821d5aa4b844f8 https://git.kernel.org/stable/c/835745a377a4519decd1a36d6b926e369 •
CVSS: -EPSS: 0%CPEs: 6EXPL: 0CVE-2024-50095 – RDMA/mad: Improve handling of timed out WRs of mad agent
https://notcve.org/view.php?id=CVE-2024-50095
In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? • https://git.kernel.org/stable/c/713adaf0ecfc49405f6e5d9e409d984f628de818 https://git.kernel.org/stable/c/7022a517bf1ca37ef5a474365bcc5eafd345a13a https://git.kernel.org/stable/c/e80eadb3604a92d2d086e956b8b2692b699d4d0a https://git.kernel.org/stable/c/a195a42dd25ca4f12489687065d00be64939409f https://git.kernel.org/stable/c/3e799fa463508abe7a738ce5d0f62a8dfd05262a https://git.kernel.org/stable/c/2a777679b8ccd09a9a65ea0716ef10365179caac •
CVSS: -EPSS: 0%CPEs: 5EXPL: 0CVE-2024-50093 – thermal: intel: int340x: processor: Fix warning during module unload
https://notcve.org/view.php?id=CVE-2024-50093
In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int340x: processor: Fix warning during module unload The processor_thermal driver uses pcim_device_enable() to enable a PCI device, which means the device will be automatically disabled on driver detach. Thus there is no need to call pci_disable_device() again on it. With recent PCI device resource management improvements, e.g. commit f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is exposed and triggers the warining below. [ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device [ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100 ... [ 224.010844] Call Trace: [ 224.010845] <TASK> [ 224.010847] ? show_regs+0x6d/0x80 [ 224.010851] ? __warn+0x8c/0x140 [ 224.010854] ? pci_disable_device+0xe5/0x100 [ 224.010856] ? • https://git.kernel.org/stable/c/acd65d5d1cf4a3324c8970ba74632abe069fe23e https://git.kernel.org/stable/c/8403021b6f32d68a7e3a6b8428ecaf5c153a9974 https://git.kernel.org/stable/c/b4ab78f4adeaf6c98be5d375518dd4fb666eac5e https://git.kernel.org/stable/c/dd64ea03375618684477f946be4f5e253f8676c2 https://git.kernel.org/stable/c/434525a864136c928b54fd2512b4c0167c207463 https://git.kernel.org/stable/c/99ca0b57e49fb73624eede1c4396d9e3d10ccf14 •