Page 456 of 3892 results (0.015 seconds)

CVSS: -EPSS: 0%CPEs: 2EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix memory related IO errors and crashes It turns out that while the QSEECOM APP_SEND command has specific fields for request and response buffers, uefisecapp expects them both to be in a single memory region. Failure to adhere to this has (so far) resulted in either no response being written to the response buffer (causing an EIO to be emitted down the line), the SCM call to fail with EINVAL (i.e., directly from TZ/firmware), or the device to be hard-reset. While this issue can be triggered deterministically, in the current form it seems to happen rather sporadically (which is why it has gone unnoticed during earlier testing). This is likely due to the two kzalloc() calls (for request and response) being directly after each other. Which means that those likely return consecutive regions most of the time, especially when not much else is going on in the system. Fix this by allocating a single memory region for both request and response buffers, properly aligning both structs inside it. This unfortunately also means that the qcom_scm_qseecom_app_send() interface needs to be restructured, as it should no longer map the DMA regions separately. • https://git.kernel.org/stable/c/759e7a2b62eb3ef3c93ffeb5cca788a09627d7d9 https://git.kernel.org/stable/c/dd22b34fb53cb04b13b2f5eee5c9200bb091fc88 https://git.kernel.org/stable/c/ed09f81eeaa8f9265e1787282cb283f10285c259 •

CVSS: -EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: mm: turn folio_test_hugetlb into a PageType The current folio_test_hugetlb() can be fooled by a concurrent folio split into returning true for a folio which has never belonged to hugetlbfs. This can't happen if the caller holds a refcount on it, but we have a few places (memory-failure, compaction, procfs) which do not and should not take a speculative reference. Since hugetlb pages do not use individual page mapcounts (they are always fully mapped and use the entire_mapcount field to record the number of mappings), the PageType field is available now that page_mapcount() ignores the value in this field. In compaction and with CONFIG_DEBUG_VM enabled, the current implementation can result in an oops, as reported by Luis. This happens since 9c5ccf2db04b ("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks in the PageHuge() testing path. [willy@infradead.org: update vmcoreinfo] Link: https://lkml.kernel.org/r/ZgGZUvsdhaT1Va-T@casper.infradead.org En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: mm: convierte folio_test_hugetlb en un PageType. El folio_test_hugetlb() actual puede ser engañado por una división de folio concurrente y devuelve verdadero para un folio que nunca ha pertenecido a hugetlbfs. Esto no puede suceder si la persona que llama tiene un recuento sobre él, pero tenemos algunos lugares (fallo de memoria, compactación, procfs) que no toman ni deben tomar una referencia especulativa. Dado que las páginas de Hugetlb no usan recuentos de mapas de páginas individuales (siempre están completamente asignadas y usan el campo Whole_mapcount para registrar el número de asignaciones), el campo PageType está disponible ahora que page_mapcount() ignora el valor en este campo. • https://git.kernel.org/stable/c/9c5ccf2db04b8d7c3df363fdd4856c2b79ab2c6a https://git.kernel.org/stable/c/2431b5f2650dfc47ce782d1ca7b02d6b3916976f https://git.kernel.org/stable/c/9fdcc5b6359dfdaa52a55033bf50e2cedd66eb32 https://git.kernel.org/stable/c/d99e3140a4d33e26066183ff727d8f02f56bec64 •

CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: phy: marvell: a3700-comphy: Fix out of bounds read There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr' every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'. Make sure 'gbe_phy_init[addr]' is used when all elements of 'gbe_phy_init_fix' array are handled. Found by Linux Verification Center (linuxtesting.org) with SVACE. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: phy: marvell: a3700-comphy: corrección de lectura fuera de los límites. Hay un acceso de lectura fuera de los límites de 'gbe_phy_init_fix[fix_idx].addr' en cada iteración después de que 'fix_idx' alcance ' ARRAY_SIZE(gbe_phy_init_fix)'. Asegúrese de que se utilice 'gbe_phy_init[addr]' cuando se manejen todos los elementos de la matriz 'gbe_phy_init_fix'. Encontrado por el Centro de verificación de Linux (linuxtesting.org) con SVACE. • https://git.kernel.org/stable/c/934337080c6c59b75db76b180b509f218640ad48 https://git.kernel.org/stable/c/976df695f579bbb2914114b4e9974fe4ed1eb813 https://git.kernel.org/stable/c/610f175d2e16fb2436ba7974b990563002c20d07 https://git.kernel.org/stable/c/40406dfbc060503d2e0a9e637e98493c54997b3d https://git.kernel.org/stable/c/e4308bc22b9d46cf33165c9dfaeebcf29cd56f04 • CWE-125: Out-of-bounds Read •

CVSS: 5.5EPSS: 0%CPEs: 3EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue drain_workqueue() cannot be called safely in a spinlocked context due to possible task rescheduling. In the multi-task scenario, calling queue_work() while drain_workqueue() will lead to a Call Trace as pushing a work on a draining workqueue is not permitted in spinlocked context. Call Trace: <TASK> ? __warn+0x7d/0x140 ? __queue_work+0x2b2/0x440 ? report_bug+0x1f8/0x200 ? • https://git.kernel.org/stable/c/c40bd7d9737bdcfb02d42765bc6c59b338151123 https://git.kernel.org/stable/c/758071a35d9f3ffd84ff12169d081412a2f5f098 https://git.kernel.org/stable/c/c9b732a9f73eadc638abdcf0a6d39bc7a0c1af5f https://git.kernel.org/stable/c/d5638de827cff0fce77007e426ec0ffdedf68a44 https://access.redhat.com/security/cve/CVE-2024-35991 https://bugzilla.redhat.com/show_bug.cgi?id=2281843 •

CVSS: 5.5EPSS: 0%CPEs: 6EXPL: 0

In the Linux kernel, the following vulnerability has been resolved: dma: xilinx_dpdma: Fix locking There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] ---truncated--- En el kernel de Linux, se resolvió la siguiente vulnerabilidad: dma: xilinx_dpdma: bloqueo de reparación Hay varios lugares donde chan-&gt;lock o chan-&gt;vchan.lock no se mantuvieron. Agregue el bloqueo apropiado. Esto corrige advertencias de bloqueo como [31.077578] ------------[ cortar aquí ]------------ [ 31.077831] ADVERTENCIA: CPU: 2 PID: 40 en los controladores/ dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Módulos vinculados en: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 No contaminado 6.6.20+ #98 [ 31.07 8102] Nombre del hardware : xlnx,zynqmp (DT) [31.078169] Cola de trabajo: events_unbound deferred_probe_work_func [31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [31.078377] pc: xilinx_dpdma_chan_queue _transfer+0x274/0x5e0 [ 31.078473 ] lr: xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [31.078550] sp: ffffffc083bb2e10 [31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: 65a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 00000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9: 0001ffc082aa3def [31.079824 ] x8: 0001ffc082aa3dec x7: 0000000000000000 x6: 0000000000000516 [31.079982] x5: ffffffc7f8d43000 x4: ffffff88003c9c40 x3: ffffffffffffffff [ 31.0 80147] x2: ffffffc7f8d43000 x1: 00000000000000c0 x0: 0000000000000000 [31.080307] Rastreo de llamadas: [31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [31. 080518 ] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit +0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50 /0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered +0x2d0/0x34c [ 31.082663] Register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 3 1.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0 /0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] +0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207 device_initial_probe+0x14/0 x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451 ] Process_one_work+0x3ac/0x988 [31.084643] work_thread+0x398/0x694 [31.084752] kthread+0x1bc/0x1c0 [31.084848] ret_from_fork+0x10/0x20 [31.084932] sello de evento irq: 9 [31.084970] hardirqs habilitado por última vez en (64548): [ ] _raw_spin_unlock_irqrestore+0x80/0x90 [31.085157] ---truncado--- • https://git.kernel.org/stable/c/7cbb0c63de3fc218fd06ecfedb477772a4d12f76 https://git.kernel.org/stable/c/fcdd5bb4a8c81c64c1334d7e0aba41a8829a24de https://git.kernel.org/stable/c/0ccac964520a6f19e355652c8ca38af2a7f27076 https://git.kernel.org/stable/c/8bf574183282d219cfa991f7df37aad491d74c11 https://git.kernel.org/stable/c/8e3c94767cad5150198e4337c8b91f3bb068e14b https://git.kernel.org/stable/c/c660be571609e03e7d5972343536a736fcb31557 https://git.kernel.org/stable/c/244296cc3a155199a8b080d19e645d7d49081a38 https://lists.debian.org/debian-lts-announce/2024/06/ • CWE-667: Improper Locking •