CVSS: -EPSS: 0%CPEs: 3EXPL: 0CVE-2024-35917 – s390/bpf: Fix bpf_plt pointer arithmetic
https://notcve.org/view.php?id=CVE-2024-35917
In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Fix bpf_plt pointer arithmetic Kui-Feng Lee reported a crash on s390x triggered by the dummy_st_ops/dummy_init_ptr_arg test [1]: [<0000000000000002>] 0x2 [<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250 [<000000000033145a>] __sys_bpf+0xa1a/0xd00 [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50 [<0000000000c4382c>] __do_syscall+0x244/0x300 [<0000000000c59a40>] system_call+0x70/0x98 This is caused by GCC moving memcpy() after assignments in bpf_jit_plt(), resulting in NULL pointers being written instead of the return and the target addresses. Looking at the GCC internals, the reordering is allowed because the alias analysis thinks that the memcpy() destination and the assignments' left-hand-sides are based on different objects: new_plt and bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot alias. This is in turn due to a violation of the C standard: When two pointers are subtracted, both shall point to elements of the same array object, or one past the last element of the array object ... From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects and cannot be subtracted. In the practical terms, doing so confuses the GCC's alias analysis. The code was written this way in order to let the C side know a few offsets defined in the assembly. While nice, this is by no means necessary. Fix the noncompliance by hardcoding these offsets. [1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/ En el kernel de Linux, se resolvió la siguiente vulnerabilidad: s390/bpf: Corrección de la aritmética del puntero bpf_plt Kui-Feng Lee informó un bloqueo en s390x provocado por la prueba dummy_st_ops/dummy_init_ptr_arg [1]: [<00000000000000002>] 0x2 [<00000000009d5cde> ] bpf_struct_ops_test_run+0x156/0x250 [<000000000033145a>] __sys_bpf+0xa1a/0xd00 [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50 [<0000000000 c4382c>] __do_syscall+0x244/0x300 [<0000000000c59a40>] system_call+0x70/0x98 Esto es causado por GCC mueve memcpy() después de las asignaciones en bpf_jit_plt(), lo que da como resultado que se escriban punteros NULL en lugar de las direcciones de retorno y de destino. Al observar los aspectos internos de GCC, se permite el reordenamiento porque el análisis de alias piensa que el destino memcpy() y los lados izquierdos de las asignaciones se basan en objetos diferentes: new_plt y bpf_plt_ret/bpf_plt_target respectivamente y, por lo tanto, no pueden crear alias. • https://git.kernel.org/stable/c/f1d5df84cd8c3ec6460c78f5b86be7c84577a83f https://git.kernel.org/stable/c/c3062bdb859b6e2567e7f5c8cde20c0250bb130f https://git.kernel.org/stable/c/d3d74e45a060d218fe4b0c9174f0a77517509d8e https://git.kernel.org/stable/c/7ded842b356d151ece8ac4985940438e6d3998bb •
CVSS: 5.3EPSS: 0%CPEs: 4EXPL: 0CVE-2024-35916 – dma-buf: Fix NULL pointer dereference in sanitycheck()
https://notcve.org/view.php?id=CVE-2024-35916
In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix NULL pointer dereference in sanitycheck() If due to a memory allocation failure mock_chain() returns NULL, it is passed to dma_fence_enable_sw_signaling() resulting in NULL pointer dereference there. Call dma_fence_enable_sw_signaling() only if mock_chain() succeeds. Found by Linux Verification Center (linuxtesting.org) with SVACE. En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: dma-buf: corrige la desreferencia del puntero NULL en sanitycheck(). Si debido a un error en la asignación de memoria, mock_chain() devuelve NULL, se pasa a dma_fence_enable_sw_signaling(), lo que genera una desreferencia del puntero NULL allí. . Llame a dma_fence_enable_sw_signaling() solo si mock_chain() tiene éxito. Encontrado por el Centro de verificación de Linux (linuxtesting.org) con SVACE. • https://git.kernel.org/stable/c/d62c43a953ce02d54521ec06217d0c2ed6d489af https://git.kernel.org/stable/c/0336995512cdab0c65e99e4cdd47c4606debe14e https://git.kernel.org/stable/c/156c226cbbdcf5f3bce7b2408a33b59fab7fae2c https://git.kernel.org/stable/c/eabf131cba1db12005a68378305f13b9090a7a6b https://git.kernel.org/stable/c/2295bd846765c766701e666ed2e4b35396be25e6 •
CVSS: -EPSS: 0%CPEs: 8EXPL: 0CVE-2024-35915 – nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet
https://notcve.org/view.php?id=CVE-2024-35915
In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet syzbot reported the following uninit-value access issue [1][2]: nci_rx_work() parses and processes received packet. When the payload length is zero, each message type handler reads uninitialized payload and KMSAN detects this issue. The receipt of a packet with a zero-size payload is considered unexpected, and therefore, such packets should be silently discarded. This patch resolved this issue by checking payload size before calling each message type handler codes. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: nfc: nci: corrigió el valor uninit en nci_dev_up y nci_ntf_packet syzbot informó el siguiente problema de acceso al valor uninit [1][2]: nci_rx_work() analiza y procesa el paquete recibido. Cuando la longitud del payload es cero, cada controlador de tipo de mensaje lee el payload no inicializado y KMSAN detecta este problema. • https://git.kernel.org/stable/c/6a2968aaf50c7a22fced77a5e24aa636281efca8 https://git.kernel.org/stable/c/11387b2effbb55f58dc2111ef4b4b896f2756240 https://git.kernel.org/stable/c/03fe259649a551d336a7f20919b641ea100e3fff https://git.kernel.org/stable/c/755e53bbc61bc1aff90eafa64c8c2464fd3dfa3c https://git.kernel.org/stable/c/ac68d9fa09e410fa3ed20fb721d56aa558695e16 https://git.kernel.org/stable/c/b51ec7fc9f877ef869c01d3ea6f18f6a64e831a7 https://git.kernel.org/stable/c/a946ebee45b09294c8b0b0e77410b763c4d2817a https://git.kernel.org/stable/c/8948e30de81faee87eeee01ef42a1f600 •
CVSS: 5.5EPSS: 0%CPEs: 5EXPL: 0CVE-2024-35912 – wifi: iwlwifi: mvm: rfi: fix potential response leaks
https://notcve.org/view.php?id=CVE-2024-35912
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: rfi: fix potential response leaks If the rx payload length check fails, or if kmemdup() fails, we still need to free the command response. Fix that. En el kernel de Linux, se resolvió la siguiente vulnerabilidad: wifi: iwlwifi: mvm: rfi: corrige posibles fugas de respuesta Si falla la verificación de la longitud de la payload de rx, o si falla kmemdup(), aún necesitamos liberar la respuesta del comando. Arregla eso. • https://git.kernel.org/stable/c/21254908cbe995a3982a23da32c30d1b43467043 https://git.kernel.org/stable/c/28db0ae86cb91a4ab0e855cff779daead936b7d5 https://git.kernel.org/stable/c/99a75d75007421d8e08ba139e24f77395cd08f62 https://git.kernel.org/stable/c/c0a40f2f8eba07416f695ffe2011bf3f8b0b6dc8 https://git.kernel.org/stable/c/f7f0e784894dfcb265f0f9fa499103b0ca7eabde https://git.kernel.org/stable/c/06a093807eb7b5c5b29b6cff49f8174a4e702341 https://access.redhat.com/security/cve/CVE-2024-35912 https://bugzilla.redhat.com/show_bug.cgi?id=2281636 •
CVSS: 5.5EPSS: 0%CPEs: 4EXPL: 0CVE-2024-35911 – ice: fix memory corruption bug with suspend and rebuild
https://notcve.org/view.php?id=CVE-2024-35911
In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? • https://git.kernel.org/stable/c/b3e7b3a6ee92ab927f750a6b19615ce88ece808f https://git.kernel.org/stable/c/ca03b327224ed6be2d07f42ee6ee1cdd586cfd5b https://git.kernel.org/stable/c/e40a02f06ceb0e0b0183e0b973ac5dbf8f75edec https://git.kernel.org/stable/c/11ff8392943e08a35cb0aa19d638b02db745f170 https://git.kernel.org/stable/c/1cb7fdb1dfde1aab66780b4ba44dba6402172111 https://access.redhat.com/security/cve/CVE-2024-35911 https://bugzilla.redhat.com/show_bug.cgi?id=2281639 •