Page 5 of 48 results (0.003 seconds)

CVSS: 9.8EPSS: 0%CPEs: 264EXPL: 0

A vulnerability in the authentication, authorization, and accounting (AAA) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass NETCONF or RESTCONF authentication and do either of the following: Install, manipulate, or delete the configuration of an affected device Cause memory corruption that results in a denial of service (DoS) on an affected device This vulnerability is due to an uninitialized variable. An attacker could exploit this vulnerability by sending a series of NETCONF or RESTCONF requests to an affected device. A successful exploit could allow the attacker to use NETCONF or RESTCONF to install, manipulate, or delete the configuration of a network device or to corrupt memory on the device, resulting a DoS. Una vulnerabilidad en la función de autenticación, autorización y contabilidad (AAA) de Cisco IOS XE Software podría permitir a un atacante remoto no autenticado omitir la autenticación NETCONF o RESTCONF y realizar cualquiera de las siguientes acciones Instalar, manipular o eliminar la configuración de un dispositivo afectado. Causar una corrupción de la memoria que resulte en una denegación de servicio (DoS) en un dispositivo afectado. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aaa-Yx47ZT8Q • CWE-824: Access of Uninitialized Pointer CWE-908: Use of Uninitialized Resource •

CVSS: 7.4EPSS: 0%CPEs: 101EXPL: 1

A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. Una vulnerabilidad en el procesamiento del tráfico IPv6 de Cisco IOS XE Wireless Controller Software para Cisco Catalyst 9000 Family Wireless Controllers podría permitir a un atacante adyacente no autenticado causar un bucle de capa 2 (L2) en una VLAN configurada, resultando en una condición de denegación de servicio (DoS) para esa VLAN. • https://github.com/lukejenkins/CVE-2021-34767 https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ewlc-ipv6-dos-NMYeCnZv • CWE-670: Always-Incorrect Control Flow Implementation •

CVSS: 5.3EPSS: 0%CPEs: 1721EXPL: 0

A vulnerability in the Voice Telephony Service Provider (VTSP) service of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured destination patterns and dial arbitrary numbers. This vulnerability is due to insufficient validation of dial strings at Foreign Exchange Office (FXO) interfaces. An attacker could exploit this vulnerability by sending a malformed dial string to an affected device via either the ISDN protocol or SIP. A successful exploit could allow the attacker to conduct toll fraud, resulting in unexpected financial impact to affected customers. Una vulnerabilidad en el servicio Voice Telephony Service Provider (VTSP) de Cisco IOS Software y Cisco IOS XE Software podría permitir a un atacante remoto no autenticado omitir los patrones de destino configurados y marcar números arbitrarios. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fxo-pattern-bypass-jUXgygYv • CWE-232: Improper Handling of Undefined Values •

CVSS: 6.8EPSS: 0%CPEs: 203EXPL: 0

A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lldp-dos-sBnuHSjT • CWE-456: Missing Initialization of a Variable CWE-665: Improper Initialization •

CVSS: 7.7EPSS: 0%CPEs: 834EXPL: 0

A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Una vulnerabilidad en el analizador TrustSec CLI de Cisco IOS and Cisco IOS XE Software podría permitir a un atacante remoto y autenticado causar una recarga de un dispositivo afectado. • https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-trustsec-dos-7fuXDR2 • CWE-435: Improper Interaction Between Multiple Correctly-Behaving Entities CWE-436: Interpretation Conflict •